--- 1/draft-ravisingh-mpls-el-for-seamless-mpls-03.txt	2014-10-27 17:14:45.835178725 -0700
+++ 2/draft-ravisingh-mpls-el-for-seamless-mpls-04.txt	2014-10-27 17:14:45.883179885 -0700
@@ -1,19 +1,19 @@
 
 MPLS Working Group                                              R. Singh
 INTERNET-DRAFT                                                   Y. Shen
 Intended Status: Proposed Standard                              J. Drake
 Expires: April 30, 2015                                 Juniper Networks
                                                         October 27, 2014
 
                     Entropy label for seamless MPLS
-              draft-ravisingh-mpls-el-for-seamless-mpls-03
+              draft-ravisingh-mpls-el-for-seamless-mpls-04
 
 Abstract
 
    This document describes certain optimizations to how entropy labels
    can be used for load balancing in a seamless MPLS architecture, as
    enabled by LSP concatenation and LSP hierarchies.
 
    The definition of the control plane and data plane behavior at LSP
    concatenation points; and at the ingress of an LSP in a hierarchy of
    LSPs, as described in this document, brings the benefits of entropy
@@ -953,20 +953,23 @@
 
 9. Acknowledgments
 
    Many thanks to Adrian Farrel for his inputs on the stitching
    scenarios, and suggesting editorial improvements.
 
    Thanks to the EL team (Sudharsana Venkataraman, Nitin Singh, Ramji
    Vijayaraghavan, Jie Yan, Abhishek Tripathi) for discussions on some
    of these topics.
 
+   May thanks to John Scudder for discussions on this topic and his
+   editorial comments/corrections.
+
 10. IANA considerations
 
    None.
 
 11.  References
 
 11.1  Normative References
 
    [EL-RFC]     Kompella, K., Drake, J., Amante, S., Henderickx, W.,
                 L. Yong, "The Use of Entropy Labels in MPLS Forwarding",