draft-ietf-rap-feedback-fr-pib-00.txt   draft-ietf-rap-feedback-fr-pib-01.txt 
Internet Draft Diana Rawlins Internet Draft Diana Rawlins
Expiration: January 2002 WorldCom Expiration: May 2002 WorldCom
File: draft-ietf-rap-feedback-fr-pib-00.txt Amol Kulkarni File: draft-ietf-rap-feedback-fr-pib-01.txt Amol Kulkarni
Intel Intel
Kwok Ho Chan Kwok Ho Chan
Nortel Networks Nortel Networks
Dinesh Dutt
Cisco
Martin Bokaemper Martin Bokaemper
Unisphere Networks Unisphere Networks
Dinesh Dutt
Cisco
Framework of COPS-PR Policy Information Base for Policy Usage Framework of COPS-PR Policy Information Base for Policy Usage
Feedback Feedback
Last Updated July 12 2001 Last Updated November 20, 2001
Status of this Memo Status of this Memo
This document is an Internet-Draft and is in full conformance with This document is an Internet-Draft and is in full conformance with
all provisions of Section 10 of RFC2026. all provisions of Section 10 of RFC2026.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet- other groups may also distribute working documents as Internet-
Drafts. Drafts.
skipping to change at page 1, line 42 skipping to change at page 1, line 42
progress." progress."
The list of current Internet-Drafts can be accessed at The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt http://www.ietf.org/ietf/1id-abstracts.txt
The list of Internet-Draft Shadow Directories can be accessed at The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html. http://www.ietf.org/shadow.html.
Conventions used in this document Conventions used in this document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL
NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL"
"OPTIONAL" in this document are to be interpreted as described in in this document are to be interpreted as described in [RFC-2119].
[RFC-2119].
Abstract Abstract
Currently there are no policy classes defined for the PEP to convey Currently there are no policy classes defined for the PEP to convey
provisioned policy usage feedback to the PDP. The purpose of this provisioned policy usage feedback to the PDP. The purpose of this
document is to define the policy usage feedback framework PIB that document is to define the policy usage feedback framework PIB that
specifies the policy classes common for COPS feedback reports. The specifies the policy classes common for COPS feedback reports. The
basic operation and objects for reporting usage information are basic operation and objects for reporting usage information are
defined in [COPS]. A specific clientSI feedback object named REPORT defined in [COPS]. A specific clientSI feedback object named REPORT
is defined in [COPS-PR]. A framework for approaching solicited and is defined in [COPS-PR]. A framework for approaching solicited and
periodic usage feedback is described in [COPS-FEED-FRWK]. This periodic usage feedback is described in [COPS-FEED-FRWK.]This
document defines the policy classes for a feedback framework Policy document defines the policy classes for a feedback framework Policy
information base (PIB). information base (PIB).
Table of Contents Table of Contents
1 Introduction.....................................................3 1 Introduction.....................................................3
2 General Concepts.................................................3 2 General Concepts.................................................3
2.1 Selection, Usage and Linkage Policies..........................3 2.1 Selection, Usage and Linkage Policies..........................3
2.2 Normal Operations..............................................4 2.2 Normal Operations..............................................4
2.2.1 Connection Establishment and Initial Configuration Request...4 2.2.1 Connection Establishment and Initial Configuration Request...4
2.2.2 Unsolicited Reports - Periodic Reporting.....................5 2.2.2 Unsolicited Reports - Periodic Reporting.....................5
2.2.3 Solicited Reports............................................5 2.2.3 Unsolicited Reports - Reporting Conditions...................5
2.2.4 Resuming and Suspending Periodic Feedback Reporting..........5 2.2.4 Solicited Reports............................................5
2.2.5 Failover.....................................................6 2.2.5 Resuming and Suspending Periodic Feedback Reporting..........6
2.2.6 Failover.....................................................6
3 Summary of the Feedback Framework Policy Information Base........6 3 Summary of the Feedback Framework Policy Information Base........6
3.1 SPPI ACCESS clause report-only.................................6 3.1 SPPI ACCESS clause report-only.................................6
3.2 Feedback Type Report Group and PRCs............................6 3.2 Feedback Groups and PRCs.......................................7
3.2.1 Feedback Action Table........................................6 3.2.1 Feedback Action Table........................................7
3.2.2 Feedback List Table..........................................7 3.2.2 Feedback List Table..........................................8
3.2.3 The Feedback Report Linkage Table............................7 3.2.3 The Feedback Selection Usage Combination Capability Table....8
4 The Feedback Framework PIB Module................................8 3.2.4 The Feedback Report Linkage Table............................8
5 Security Considerations.........................................15 3.2.7 The Feedback Traffic Statistics Threshold Table..............9
6 Acknowledgements................................................15 3.2.8 The SetWatchPoint Table......................................9
7 Authors' Addresses..............................................15 3.2.9 Feedback DPE Selection Criteria Table........................9
8 References......................................................15 3.2.10 Feedback DPE Selection Query Table..........................9
4 The Feedback Framework PIB Module...............................10
5 Security Considerations.........................................25
6 Acknowledgements................................................25
7 Authors' Addresses..............................................26
8 References......................................................26
1 Introduction 1 Introduction
The Framework of COPS-PR Usage Feedback describes the overall The Framework of COPS-PR Usage Feedback describes the overall
approach to policy usage monitoring and reporting. This document approach to policy usage monitoring and reporting. This document
defines the specific Policy Information Base (PIB) framework for defines the specific Policy Information Base (PIB) framework for
policy usage feedback. The policy classes for monitoring and policy usage feedback. The policy classes for monitoring and
reporting policy usage feedback as well as policy classes for reporting policy usage feedback as well as policy classes for
controlling reporting intervals, suspension, resumption and controlling reporting intervals, suspension, resumption and
solicitation are also defined. solicitation are also defined.
skipping to change at page 3, line 25 skipping to change at page 3, line 25
2 General Concepts 2 General Concepts
2.1 Selection, Usage and Linkage Policies 2.1 Selection, Usage and Linkage Policies
There are three basic types of policy used to define what the PEP is There are three basic types of policy used to define what the PEP is
to monitor, record and report. These are the selection criteria to monitor, record and report. These are the selection criteria
policy, the usage policy and the feedback report linkage policy. policy, the usage policy and the feedback report linkage policy.
The selection criteria policy is installed by the PDP. It defines the The selection criteria policy is installed by the PDP. It defines the
conditions used by the PEP to monitor and record a usage policy. conditions used by the PEP to monitor and record a usage policy.
Generally, the selection criterion is an existing PRI such as an Generally, the selection criterion is an existing PRC such as the
instance of the frwkIPFilterTable. This PRC is useful for specifying qosClfrElementEntry. This PRC is useful for specifying conditions on
conditions on which to base usage - i.e. count the number of packets which to base usage - i.e. count the number of packets received for
received for this filter. The filter (source address, destination this classified flow.
address, etc.) in this case defines the conditions. In the case of
the feedback framework PIB, the frwkIPFilterTable is the only PRC
used to base selection on.
The usage policy defines what attributes are monitored and recorded The usage policy defines what attributes are monitored and recorded
by the PEP. These policies have an ACCESS clause of Report. by the PEP. These policies have an ACCESS clause of Report.
Generally, the usage policies specify counts related to a specific Generally, the usage policies specify counts related to a specific
action such as a packet being dropped. The feedback framework PIB action such as a packet being dropped. The feedback framework PIB
defines one usage policy class, frwkFeedbackFilterStats. It counts defines one usage policy class, frwkFeedbackTrafficUsage. It counts
packets and bytes as well as records the timestamp when the last packets and bytes. Usage PRCs may be generic, collecting basic
packet was received. Usage PRCs may be generic, collecting basic
statistics, or they may be specific to a particular usage. The PDP statistics, or they may be specific to a particular usage. The PDP
decides which PRC(s) best suit(s) its requirements. The PEP may decides which PRC(s) best suit(s) its requirements. The PEP may
support only one usage PRC, in which case all statistics are gathered support only one usage PRC, in which case all statistics are gathered
using instances of that PRC. Alternatively, the PEP may support using instances of that PRC. Alternatively, the PEP may support
multiple usage PRCs. The PDP then decides which PRC to associate with multiple usage PRCs. The PDP then decides which PRC to associate with
a particular selection criterion. a particular selection criterion.
A usage policy and selection policy are tightly associated with one A usage policy and selection policy are tightly associated with one
another. A third policy is used to associate, or link, the selection another. A third policy is used to associate, or link, the selection
and usage policies. The frwkFeedbackLinkTable performs this linking and usage policies. The frwkFeedbackLinkTable performs this linking
of the selection and usage policies. The feedback report linkage of the selection and usage policies. The feedback report linkage
permits the same selection criteria instance to be re-used for permits the same selection criteria instance to be re-used for
various usage policies. For example, the same IP Filter selection various usage policies. The feedback type report linkage references
criteria could be the basis of different usage policies such as the selection criteria instance as well as defines the policy class
packet count, drop count, and remark count. The feedback type report of the usage PRC. As noted above, the selection criteria policy may
linkage references the selection criteria instance as well as defines be used for enforcement policies as well as usage policies. This is
the policy class of the usage PRC. As noted above, the selection the case with qosClfrElementEntry.
criteria policy may be used for enforcement policies as well as usage
policies. This is the case with the frwkIPFilterTable.
----------------- ------------------ ----------------- ----------------- ------------------ -----------------
| | | | | | | | | | | |
| Select Criteria | |Linkage Instance | |Usage Instance | | Select Criteria | |Linkage Instance | |Usage Instance |
| | |-instance ID | |- instance ID | | | |-instance ID | |- instance ID |
| -instance ID |<--|-PRID of selection|--->|- PRID of Linkage| | -instance ID |<--|-PRID of selection|--->|- PRID of Linkage|
| -conditions... | |-PRC of usage | |- counts... | | -conditions... | |-PRC of usage | |- counts... |
| | | | | | | | | | | |
----------------- ------------------ ----------------- ----------------- ------------------ -----------------
Figure 1 Figure 1
Figure 1 illustrates the relationship between a selection criteria, Figure 1 illustrates the relationship between a selection criteria,
linkage and usage policies. linkage and usage policies.
There is a one to one relationship between the report linkage policy The PDP is not aware of the instance identifier of the usage policy
instance and the usage policy instance. The PDP is not aware of the when installing the selection criteria and feedback report linkage
instance identifier of the usage policy when installing the selection policies. The usage policy is instantiated on the PEP by the
criteria and feedback report linkage policies. The usage policy is installation of a feedback report linkage and the PEP designates the
instantiated on the PEP by the installation of a feedback report instance identifier. The usage policy class always contains an
linkage and the PEP designates the instance identifier. The usage attribute of type Prid which contains the value of the associated
policy class always contains an attribute of type Prid which contains feedback report linkage PRID [COPS-PR] installed by the PDP. Note
the value of the associated feedback report linkage PRID [COPS-PR] that the Prid type is a textual convention for an object identifier
installed by the PDP. Note that the Prid type is a textual convention that is the PRC of the table used for the feedback report linkage
for an object identifier that is the PRC of the table used for the (was - selection criteria) and where the last sub-identifier is an
feedback report linkage and where the last sub-identifier is an
instance ID of the feedback report linkage. instance ID of the feedback report linkage.
2.2 Normal Operations 2.2 Normal Operations
2.2.1 Connection Establishment and Initial Configuration Request 2.2.1 Connection Establishment and Initial Configuration Request
The Accounting Timer object in the Connection Accept message contains The Accounting Timer object in the Connection Accept message contains
the minimum number of seconds between reporting intervals as the minimum number of seconds between reporting intervals as
described in [COPS] and [COPS-FEED-FRWK.] This is used as the basic described in [COPS] and [COPS-FEEDBACK-FRWK.] This is used as the
unit of measurement in defining intervals for specific usage policies basic unit of measurement in defining intervals for specific usage
with the frwkFeedbackLinkInterval attribute. policies with the frwkFeedbackLinkInterval attribute.
The PEP notifies the PDP of the selection criteria policy classes and The PEP notifies the PDP of the selection criteria policy classes and
usage policy classes it supports during the initial request for usage policy classes it supports during the initial request for
configuration data using the frwkPRCSupportTable entries[FR-PIB]. The configuration data using the frwkPRCSupportTable entries [FR-PIB].
PEP also indicates whether it supports the frwkFeedbackLinkTable as The PEP also indicates whether it supports the frwkFeedbackLinkTable
well. as well.
The PDP responds to the initial request for configuration with a The PDP responds to the initial request for configuration with a
DECISION that installs policies. The PDP may also specify maximum DECISION that installs policies. The PDP may also specify maximum
reporting intervals associated with each of the usage policies and reporting intervals associated with each of the usage policies. This
does this with the frwkFeedbackLinkInterval attribute in the is done with the frwkFeedbackLinkInterval attribute in the
frwkFeedbackLinkTable instance. The PEP monitors and records the frwkFeedbackLinkTable instance. It may also specify reporting
usage per the conditions defined by its associated selection criteria thresholds by including an instance of a threshold class (e.g.
policy. Periodically the PEP reports the usage with an feedback type frwkFeedbackTrafficThresholdTable) in the decision. The PEP monitors
REPORT or provides a REPORT when solicited by the PDP. The PDP and records the usage per the conditions defined by its associated
solicits usage feedback with the frwkFeedbackResumeIndicator selection criteria policy. Periodically the PEP reports the usage
attribute of the frwkFeedbackResumeTable. with an feedback type REPORT or provides a REPORT when solicited by
the PDP. The PDP solicits usage feedback with the
frwkFeedbackActionIndicator attribute of the frwkFeedbackActionTable.
2.2.2 Unsolicited Reports - Periodic Reporting 2.2.2 Unsolicited Reports - Periodic Reporting
Reporting may be periodic in nature and unsolicited. The intervals Reporting may be periodic in nature and unsolicited. The intervals
at which the unsolicited reports are provided by the PEP are defined at which the unsolicited reports are provided by the PEP are defined
in the specific Linkage policies. The defined intervals are based on in the specific Linkage policies. The defined intervals are based on
the number of seconds specified by the PDP in the ACCT Timer value. the number of seconds specified by the PDP in the ACCT Timer value.
The PDP may specify that the periodic unsolicited report is to only
occur if a threshold is reached and/or if the usage value has
changed from the previous reporting interval.
There are cases when the PEP must supply unsolicited feedback There are cases when the PEP must supply unsolicited feedback
reports that may not fall on an interval boundary. The PEP must reports that may not fall on an interval boundary. The PEP MUST
provide an unsolicited REPORT containing all defined usages provide an unsolicited REPORT containing all defined usages
instances just prior to the PEP issuing a Delete Request State and instances just prior to the PEP issuing a Delete Request State and
just prior to the PEP de-activating a PIB instance context. just prior to the PEP de-activating a PIB instance context.
2.2.3 Solicited Reports 2.2.3 Unsolicited Reports - Reporting Conditions
Periodic unsolicited reports for individual linkage objects can be
suppressed by specifying additional conditions. Supported conditions
are:
ChangeOnly
If this flag is set in the frwkFeedbackUsageLinkFlags field,
the associated usage instance is only included in a periodic
unsolicited report if its value changed since the last
unsolicited report.
Threshold
If this flag is set in the frwkFeedbackUsageLinkFlags field,
the associated usage instance is only included in a periodic
unsolicited report, if the threshold condition referenced in
the frwkLinkThreshold field evaluates successfully for the
associated usage instance.
Both conditions can be combined in one frwkFeedbackLinkUsage object.
In this case both conditions need to succeed for the usage instance
to be reported.
Unsolicited reports triggered by a Delete Request State or the
deactivation of a PIB instance are not subject to these conditions -
all usage objects must be included in these cases.
2.2.4 Solicited Reports
The PDP may solicit policy usage feedback by issuing an unsolicited The PDP may solicit policy usage feedback by issuing an unsolicited
Decision containing the frwkFeedbackResumeIndicator set to SOLICIT Decision containing the frwkFeedbackActionIndicator set to SOLICIT
USAGE NOW. The PEP is to provide a solicited REPORT feedback USAGE REPORT NOW. The PEP is to provide a solicited REPORT feedback
containing usage feedback. The PEP shall continue to provide containing usage feedback. The PEP shall continue to provide
periodic feedback as well at the specified intervals established at periodic feedback as well at the specified intervals established at
client connection acceptance. client connection acceptance.
The reporting conditions (ChangeOnly and Threshold) do not affect
solicited reports - all requested usage instances must be included.
2.2.4 Resuming and Suspending Periodic Feedback Reporting 2.2.5 Resuming and Suspending Periodic Feedback Reporting
The PDP may suspend usage monitoring and tracking at the PEP with the The PDP may suspend usage monitoring and tracking at the PEP with the
frwkFeedbackResumeIndicator set to SUSPEND USAGE MONITORING AND frwkFeedbackActionIndicator set to SUSPEND USAGE MONITORING AND
REPORTS. The PEP must stop tracking usage information and must not REPORTS. The PEP must stop tracking usage information and must not
issue any feedback reports. The PDP may only suspend feedback issue any feedback reports. The PDP may only suspend feedback
reporting by setting the ResumeIndicator to SUSPEND REPORTS ONLY. The reporting by setting the ActionIndicator to SUSPEND REPORTS ONLY. The
PEP must cease sending unsolicited reports but is to continue PEP must cease sending unsolicited reports but is to continue
monitoring and tracking usage. The PDP may resume the sending of monitoring and tracking usage. The PDP may resume the sending of
feedback reports and may resume usage monitoring by setting the feedback reports and may resume usage monitoring by setting the
ResumeIndicator to RESUME USAGE AND REPORTING. ActionIndicator to RESUME USAGE AND REPORTING.
The PDP may suspend or resume for all usage instances or the PDP may The PDP may suspend or resume for all usage instances or the PDP may
specify one or more instances that are to be suspended or resumed. specify one or more instances that are to be suspended or resumed.
The ResumeList contains a tag identifier that references a list of The frwkFeedbackActionList contains a tag identifier that references
one or more frwkFeedbackSolList entries. a list of one or more frwkFeedbackActionListTable entries.
The PDP may halt usage monitoring, tracking and reporting of usage The PDP may halt usage monitoring, tracking and reporting of usage
policies by removing the associated Linkage entry. policies by removing the associated Linkage entry.
2.2.5 Failover 2.2.6 Failover
In the event the connection is lost between the PEP and PDP, the PEP In the event the connection is lost between the PEP and PDP, the PEP
continues to track usage information as long as it continues to continues to track usage information as long as it continues to
operate with the installed policy. When the locally installed policy operate with the installed policy. When the locally installed policy
at the PEP expires, the usage policy data also expires. at the PEP expires, the usage policy data also expires.
Upon successful reconnection where the PEP is still caching policy, Upon successful reconnection where the PEP is still caching policy,
the PDP indicates to the PEP that the PEP may resume sending of the the PDP indicates to the PEP that the PEP may resume sending of the
feedback type report messages. The PDP does this deterministically. feedback type report messages. The PDP does this deterministically.
It issues an unsolicited decision containing the It issues an unsolicited decision containing the
skipping to change at page 6, line 34 skipping to change at page 7, line 8
3.1 SPPI ACCESS clause report-only 3.1 SPPI ACCESS clause report-only
The selection criteria and linkage policy classes follow the The selection criteria and linkage policy classes follow the
definitions specified by [SPPI]. This structure specifies well- definitions specified by [SPPI]. This structure specifies well-
defined policy classes and their instances residing in a common, defined policy classes and their instances residing in a common,
virtual repository [FR-PIB]. The additional PIB-ACCESS clause virtual repository [FR-PIB]. The additional PIB-ACCESS clause
attribute of "report-only" denotes the usage policy class reported by attribute of "report-only" denotes the usage policy class reported by
the PEP. the PEP.
3.2 Feedback Type Report Group and PRCs 3.2 Feedback Groups and PRCs
It is useful to define reporting intervals, and suspend, resume, and It is useful to define reporting intervals, and suspend, resume, and
solicit characteristics as well as the common usage and selection solicit characteristics as well as the common usage and selection
criteria polices. These policy classes are common to account type criteria polices. These policy classes are common to account type
reporting for various technologies and apply to ALL SUBJECT- reporting for various technologies and apply to ALL SUBJECT-
CATEGORIES. The policy classes belong to a new group, Feedback Type CATEGORIES. The policy classes are divided into three new groups,
Report Group. The policy classes in the Feedback Type Report Group namely, The Feedback Report Group, The Feedback Usage Group and The
are: Feedback Selection Group.
The policy classes in the Feedback Report Group are:
1) Feedback Action Table 1) Feedback Action Table
2) Feedback Action List Table 2) Feedback Action List Table
3) Feedback Linkage Table 3) Feedback Selection Usage Combination Capability Table
4) Feedback Filter Statistics Usage Table 4) Feedback Linkage Table
The policy classes in the Feedback Usage Group are:
1) Feedback Traffic Statistics Usage Table
2) Feedback Interface Traffic Statistics Usage Table
3) Feedback Traffic Statistics Threshold Table
The policy classes in the Feedback Selection Group are:
1) SetWatchPoint Table
2) Feedback DPE Selection Criteria Table
3) Feedback DPE Selection Query Table
4) Feedback DPE Interface Usage Table
3.2.1 Feedback Action Table 3.2.1 Feedback Action Table
The Feedback Action Table contains the attributes that specify The Feedback Action Table contains the attributes that specify
action that the PEP is to take regarding policy usage, monitoring action that the PEP is to take regarding policy usage, monitoring
and tracking. The PDP may suspend usage monitoring and periodic and tracking. The PDP may suspend usage monitoring and periodic
reporting, suspend periodic reporting only, resume usage and reporting, suspend periodic reporting only, resume usage and
periodic reporting or solicit immediate reporting. The action may periodic reporting or solicit immediate reporting. The action may
affect all feedback policies or be associated with one or more affect all feedback policies or be associated with one or more
policy instances. policy instances.
skipping to change at page 7, line 46 skipping to change at page 8, line 32
usage feedback at the next interval. usage feedback at the next interval.
3.2.2 Feedback List Table 3.2.2 Feedback List Table
This table contains a list of PRIDs of the linkage table for which This table contains a list of PRIDs of the linkage table for which
the PDP wants feedback reports. The value is referenced by an the PDP wants feedback reports. The value is referenced by an
attribute in the Feedback Resume Table. There may be one or more attribute in the Feedback Resume Table. There may be one or more
instances associated with a specific list identifier defined by the instances associated with a specific list identifier defined by the
Feedback Action List ID. Feedback Action List ID.
3.2.3 The Feedback Report Linkage Table 3.2.3 The Feedback Selection Usage Combination Capability Table
This table defines the valid selection criteria PRC, and usage PRC
and threshold PRC combinations supported.
3.2.4 The Feedback Report Linkage Table
This table links the selection criteria instance with the usage This table links the selection criteria instance with the usage
instance. It specifies the PRID of the selection criteria and the PRC instance. It specifies the PRID of the selection criteria and the PRC
of the usage instance. This table permits the reuse of a selection of the usage instance. This table permits the reuse of a selection
criteria instance for multiple usage policies. criteria instance for multiple usage policies.
The linkage table also permits the definition of a maximum reporting The linkage table also permits the definition of a maximum reporting
interval to use when issuing the feedback type reports for the usage interval to use when issuing the feedback type reports for the usage
instance. This interval is defined in units of the Accounting Timer instance. This interval is defined in units of the Accounting Timer
Interval specified in the client accept message. A value of 0 in this Interval specified in the client accept message. A value of 0 in this
attribute indicates that the usage policy must be solicited. attribute indicates that the usage policy must be solicited.
3.2.4 The Feedback Filter Statistics Usage Table 3.2.5 The Feedback Traffic Statistics Usage Table
This table describes the packet counts, byte counts, last timestamp This table describes the packet counts, byte counts, last timestamp
when a packet was received and the PRID of the associated Feedback when a packet was received and the PRID of the associated Feedback
Report Linkage instance. The count and timestamp information is Report Linkage instance. The count and timestamp information is
monitored and recorded by the PEP and supplied to the PDP with the monitored and recorded by the PEP and supplied to the PDP with the
feedback type report message within the maximum interval specified. feedback type report message within the maximum interval specified.
3.2.6 The Feedback Interface Traffic Statistics Usage Table
This table is similar to the table described above, except that it
includes an additional reference to an interface. This table should
be used with a selection criteria that matches an element that is
assigned to multiple interfaces. The interface field can be used to
associate the instances of this table with the specific element’s
assignment.
3.2.7 The Feedback Traffic Statistics Threshold Table
This table is used to provide threshold values for the attributes
described in the above usage tables.
3.2.8 The SetWatchPoint Table
This table defines a selection criteria policy that identifies the
enforcement policy processing point at which the associated usage
policy is to be monitored. This is useful in the data path models
where re-use of the enforcement policy occurs and is implemented in
a linked fashion. For example, it may be useful to monitor and
feedback the packet usage at a specific dropper enforcement policy
in the DiffServ PIB.
3.2.9 Feedback DPE Selection Criteria Table
This table is an example of a Selection Criteria PRC that references
a specific instance of a shared object.
It is based on the popular model of a data path consisting of
multiple linked data path elements (DPEs).
A single data path can be assigned to multiple interfaces by a
single entry in the Data Path Table [DIFFSERV-PIB], elements within
this data path however can collect usage information for each
assignment individually.
Instances of this class allow the PDP to select a specific
assignment of a data path element to be selected for usage
reporting. This is achieved by the combination of references to a
Data Path Entry, a Data Path Element and the Interface.
It is expected to be used in combination with the
FrwkFeedbackTrafficUsage PRC.
3.2.10 Feedback DPE Selection Query Table
This Selection Criteria PRC is similar to the DPE Selection Criteria
Table, however it is missing the reference to a specific interface.
This means an instance of this class can select multiple assignments
of a data path element for usage collection. Each selected
assignment of the DPE creates its own usage instance.
This selection criteria PRC is expected to be used together with a
usage PRC that includes the a reference to an interface, so the
results can be assigned uniquely.
3.2.11 Feedback DPE Interface Usage Table
The DPE Interface Usage class is an extension of the generic Traffic
Usage class that also includes a reference to a frwkIfRoleComboEntry
that represents the interface, this instance is associated with.
4 The Feedback Framework PIB Module 4 The Feedback Framework PIB Module
FEEDBACK-FRAMEWORK-PIB PIB-DEFINITIONS ::= BEGIN FEEDBACK-FRAMEWORK-PIB PIB-DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
ExtUTCTime, Unsigned32, Unsigned64, ExtUTCTime, Unsigned32, Unsigned64,
Integer32, MODULE-IDENTITY, OBJECT-TYPE Integer32, MODULE-IDENTITY, OBJECT-TYPE
FROM COPS-PR-SPPI FROM COPS-PR-SPPI
TruthValue, TEXTUAL-CONVENTION TruthValue, TEXTUAL-CONVENTION
FROM SNMPv2-TC FROM SNMPv2-TC
PolicyInstanceId, PolicyReferenceId PolicyInstanceId, PolicyReferenceId
FROM COPS-PR-SPPI-TC; FROM COPS-PR-SPPI-TC;
RoleCombination RoleCombination
FROM POLICY-DEVICE-AUX-MIB; FROM FRAMEWORK-ROLE-PIB;
Counter64 Counter64
FROM SNMPv2-SMI; FROM SNMPv2-SMI;
feedbackPolFrameworkPib MODULE-IDENTITY feedbackPolFrameworkPib MODULE-IDENTITY
SUBJECT-CATEGORIES { all } SUBJECT-CATEGORIES { all }
LAST-UPDATED "200011171000Z" LAST-UPDATED "200011171000Z"
ORGANIZATION "IETF RAP WG" ORGANIZATION "IETF RAP WG"
CONTACT-INFO " CONTACT-INFO "
Diana Rawlins Diana Rawlins
WorldCom WorldCom
skipping to change at page 9, line 5 skipping to change at page 10, line 52
2111 NE 25th Ave 2111 NE 25th Ave
Hillsboro, Oregon 97124 Hillsboro, Oregon 97124
Phone: 503-712-1168 Phone: 503-712-1168
Email: amol.kulkarni@intel.com Email: amol.kulkarni@intel.com
Kwok Ho Chan Kwok Ho Chan
Nortel Networks, Inc. Nortel Networks, Inc.
600 Technology Park Drive 600 Technology Park Drive
Billerica, MA 01821 USA Billerica, MA 01821 USA
Phone: 978-288-8175 Phone: 978-288-8175
Email: khchan@nortelnetworks.com " Email: khchan@nortelnetworks.com
Martin Bokaemper
Unisphere Networks
700 Silver Seven Road
Kanata, ON, K2V 1C3, Canada
Phone: 613-591-2735
Email: mbokaemper@unispherenetworks.com"
DESCRIPTION DESCRIPTION
"The PIB module containing the base set of policy rule "The PIB module containing the base set of policy rule
classes that are required for support of all policy classes that are required for support of all policy
usage monitoring, tracking and reporting policiesö usage monitoring, tracking and reporting policies"
::= { tbd } ::= { tbd }
-- --
-- The feedback report group -- The feedback report group
-- --
frwkFeedbackGroupClasses frwkFeedbackGroupClasses
OBJECT IDENTIFIER ::= { feedbackPolFrameworkPib 1 } OBJECT IDENTIFIER ::= { feedbackPolFrameworkPib 1 }
-- --
skipping to change at page 9, line 39 skipping to change at page 11, line 43
"This class contains a single PRI that indicates "This class contains a single PRI that indicates
that the PEP is to resume the sending of that the PEP is to resume the sending of
feedback type reports." feedback type reports."
::= { frwkFeedbackGroupClasses 1} ::= { frwkFeedbackGroupClasses 1}
frwkFeedbackActionEntry OBJECT-TYPE frwkFeedbackActionEntry OBJECT-TYPE
SYNTAX FrwkFeedbackActionEntry SYNTAX FrwkFeedbackActionEntry
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An instance of this class indicates an action "An instance of this class can indicates a action
the PEP is to take regarding the usage policies." the PEP is to take regarding the usage policies."
PIB-INDEX { frwkFeedbackActionId} PIB-INDEX { frwkFeedbackActionId}
::= { frwkFeedbackActionTable 1} ::= { frwkFeedbackActionTable 1}
FrwkFeedbackActionEntry ::= SEQUENCE { FrwkFeedbackActionEntry ::= SEQUENCE {
frwkFeedbackActionId InstanceId, frwkFeedbackActionId InstanceId,
frwkFeedbackActionIndicator INTEGER, frwkFeedbackActionIndicator INTEGER,
frwkFeedbackActionSpecificPri INTEGER, frwkFeedbackActionSpecificPri INTEGER,
frwkFeedbackActionListId TagReference frwkFeedbackActionList TagReference
} }
frwkFeedbackActionId OBJECT-TYPE frwkFeedbackActionId OBJECT-TYPE
SYNTAX InstanceID SYNTAX InstanceID
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" An arbitrary integer index that uniquely identifies an " An arbitrary integer index that uniquely identifies an
instance of the frwkFeedbackActionTable class." instance of the frwkFeedbackActionTable class."
::= { frwkFeedbackActionEntry 1} ::= { frwkFeedbackActionEntry 1}
frwkFeedbackActionIndicator OBJECT-TYPE frwkFeedbackActionIndicator OBJECT-TYPE
skipping to change at page 10, line 36 skipping to change at page 12, line 39
::= { frwkFeedbackActionEntry 2 } ::= { frwkFeedbackActionEntry 2 }
frwkFeedbackActionSpecificPri OBJECT-TYPE frwkFeedbackActionSpecificPri OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A value of 0 indicates that the "A value of 0 indicates that the
frwkFeedbackActionListId attribute should be frwkFeedbackActionListId attribute should be
ignored, and the action applied to all policies. A ignored, and the action applied to all policies. A
value of 1 that the action entry has a specific list value of 1 indicates that the action entry has a
of policies to which it is to be applied.ö specific list of policies to which it is to be
applied."
::= { frwkFeedbackActionEntry 3} ::= { frwkFeedbackActionEntry 3}
frwkFeedbackActionListId OBJECT-TYPE frwkFeedbackActionList OBJECT-TYPE
SYNTAX TagReference SYNTAX TagReference
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Identifies a list of "Identifies a list of
frwkFeedbackActionListTable instances frwkFeedbackActionListTable instances
associated with the action described by associated with the action described by
this instance" this instance"
::= { frwkFeedbackActionEntry 4} ::= { frwkFeedbackActionEntry 4}
-- --
-- Feedback Action List Table -- Feedback Action List Table
-- --
---
frwkFeedbackActionListTable OBJECT-TYPE frwkFeedbackActionListTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrwkFeedbackActionListEntry SYNTAX SEQUENCE OF FrwkFeedbackActionListEntry
PIB-ACCESS install PIB-ACCESS install
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This class contains the PRIDs of the "This class contains the PRIDs of the
linkage instance which are to be impacted by linkage instance which are to be impacted by
the frwkFeedbackActionIndicator for this the frwkFeedbackActionIndicator for this
list." list."
::= { frwkFeedbackGroupClasses 2} ::= { frwkFeedbackGroupClasses 2}
skipping to change at page 12, line 4 skipping to change at page 14, line 7
table entry and the Action List table entries" table entry and the Action List table entries"
::= { frwkFeedbackActionListEntry 2 } ::= { frwkFeedbackActionListEntry 2 }
frwkFeedbackActionListPRID OBJECT-TYPE frwkFeedbackActionListPRID OBJECT-TYPE
SYNTAX Prid SYNTAX Prid
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The PRID of the linkage instance(s) belonging "The PRID of the linkage instance(s) belonging
to the list of instances identified by the to the list of instances identified by the
list id upon which the suspend, resume or list id upon which the suspend, resume or
solict action is directed." solicit action is directed."
::= { frwkFeedbackActionListEntry 3 } ::= { frwkFeedbackActionListEntry 3 }
-- --
-- The Feedback Selection Usage Combination Capability Table
--
frwkFeedbackSelUsageComboCapsTable OBJECT-TYPE
SYNTAX SEQENCE OF FrwkFeedbackSelUsageComboCapsEntry
PIB-ACCESS notify
STATUS current
DESCRIPTION
"This table defines the valid combinations of the
selection criteria PRCs, the usage PRCs and the
threshold PRCs that the PEP supports."
::= { frwkFeedbackGroupClasses 3}
frwkFeedbackSelUsageComboCapsEntry OBJECT-TYPE
SYNTAX FrwkFeedbackSelUsageComboCapsEntry
STATUS current
DESCRIPTION
"The attributes of this class identify valid
combinations of selection criteria, usage and
threshold PRCs for feedback supported by the PEP
device."
PIB-INDEX {frwkFeedbackActionLinkId}
UNIQUENESS { frwkFeedbacSelUsageComboCapId,
frwkFeedbackSelUsageComboCapSelection,
frwkFeedbackSelUsageComboCapUsage,
frwkFeedbackSelUsageComboCapThreshold
}
::= {frwkFeedbackSelUsageComboTable 1}
FrwkFeedbackSelUsageComboCapsEntry ::= SEQUENCE {
frwkFeedbackSelUsageComboCapId InstanceID,
frwkFeedbackSelUsageComboCapSelection OBJECT IDENTIFIER,
frwkFeedbackSelUsageComboCapUsage OBJECT IDENTIFIER,
frwkFeedbackSelUsageComboCapThreshold OBJECT IDENTIFIER
}
frwkFeedbackSelUsageComboCapId OBJECT-TYPE
SYNTAX InstanceID
STATUS current
DESCRIPTION
" An arbitrary integer index that uniquely identifies an
instance of the frwkFeedbackSelUsageComboCapsEntry
class."
::= { frwkFeedbackSelUsageComboCapsEntry 1}
frwkFeedbackSelUsageComboCapSelection OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
STATUS current
DESCRIPTION
"The PRC of the selection class that is supported by
the device in the combination defined by this instance."
::= { frwkFeedbackSelUsageComboCapsEntry 2}
frwkFeedbackSelUsageComboCapUsage OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
STATUS current
DESCRIPTION
"The PRC of the usage policy class that is supported by
the device in combination with the selection PRC and the
threshold PRC defined in this instance."
::= { frwkFeedbackSelUsageComboCapsEntry 3}
frwkFeedbackSelUsageComboCapThreshold OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
STATUS current
DESCRIPTION
"The PRC of the threshold class that is supported by
the device in the combination defined by this instance."
::= { frwkFeedbackSelUsageComboCapsEntry 2}
--
-- The Feedback Report Linkage Table -- The Feedback Report Linkage Table
-- --
frwkFeedbackLinkTable OBJECT-TYPE frwkFeedbackLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrwkFeedbackLinkEntry SYNTAX SEQUENCE OF FrwkFeedbackLinkEntry
PIB-ACCESS install PIB-ACCESS Install
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This class associates the selection criteria with the "This class associates the selection criteria with the
usage policy. It also permit the defining of the max usage policy. It also permit the defining of the max
interval used for reporting the usage instance." interval used for reporting the usage instance."
::= { frwkFeedbackGroupClasses 3} ::= { frwkFeedbackGroupClasses 4}
frwkFeedbackLinkEntry OBJECT-TYPE frwkFeedbackLinkEntry OBJECT-TYPE
SYNTAX FrwkFeedbackLinkEntry SYNTAX FrwkFeedbackLinkEntry
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This class associates the selection criteria with the "This class associates the selection criteria with the
usage policy. It also permit the defining of the max usage policy. It also permits the defining of the max
interval used for reporting the usage instance." interval used for reporting the usage instance."
PIB-INDEX {frwkFeedbackLinkId} PIB-INDEX {frwkFeedbackActionLinkId}
UNIQUENESS {frwkFeedbackLinkSel, UNIQUENESS { frwkFeedbackLinkId,
frwkFeedbackLinkSel,
frwkFeedbackLinkUsage } frwkFeedbackLinkUsage }
::= {frwkFeedbackLinkTable 1} ::= {frwkFeedbackLinkTable 1}
FrwkFeedbackLinkEntry ::= SEQUENCE { FrwkFeedbackLinkEntry ::= SEQUENCE {
frwkFeedbackLinkId InstanceID, frwkFeedbackLinkId InstanceID,
frwkFeedbackLinkSel Prid, frwkFeedbackLinkSel Prid,
frwkFeedbackLinkUsage OBJECT IDENTIFIER, frwkFeedbackLinkUsage OBJECT IDENTIFIER,
frwkFeedbackLinkInterval Integer32 frwkFeedbackLinkInterval Integer32,
frwkFeedbackLinkThreshold Prid,
frwkFeedbackLinkFlags BITS
} }
frwkFeedbackLinkId OBJECT-TYPE frwkFeedbackLinkId OBJECT-TYPE
SYNTAX InstanceID SYNTAX InstanceID
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" An arbitrary integer index that uniquely identifies an " An arbitrary integer index that uniquely identifies an
instance of the frwkFeedbackLinkTable class." instance of the frwkFeedbackLinkTable class."
::= { frwkFeedbackLinkEntry 1} ::= { frwkFeedbackLinkEntry 1}
skipping to change at page 13, line 17 skipping to change at page 16, line 42
frwkFeedbackLinkUsage OBJECT-TYPE frwkFeedbackLinkUsage OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER SYNTAX OBJECT IDENTIFIER
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The PRC of the usage policy class that the PEP uses to "The PRC of the usage policy class that the PEP uses to
monitor,record and report." monitor,record and report."
::= { frwkFeedbackLinkEntry 3} ::= { frwkFeedbackLinkEntry 3}
frwkFeedbackInterval OBJECT-TYPE frwkFeedbackLinkInterval OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Maximum interval in units of the value of the "Maximum interval in units of the value of the
Accounting Timer specificed by the PDP in the client Accounting Timer specified by the PDP in the client
accept message. A frwkFeedbackInterval of 1 is equal to accept message. A frwkFeedbackLinkInterval of 1 is
the value of the Accounting Timer. This value must be 1 equal to the value of the Accounting Timer. This value
or greater. " must be 1 or greater. "
::= { frwkFeedbackLinkEntry 4} ::= { frwkFeedbackLinkEntry 4}
frwkFeedbackLinkThreshold OBJECT-TYPE
SYNTAX Prid
STATUS current
DESCRIPTION
"The PRID of the threshold class instance. This
instance specifies the threshold values for the usage
policy."
::= { frwkFeedbackLinkEntry 5}
frwkFeedbackLinkFlags OBJECT-TYPE
SYNTAX BITS {
periodic(0),
threshold(1),
changeOnly(2),
}
STATUS current
DESCRIPTION
"This value indicates the reporting basis of the usage
policy. The feed back may be generated on demand, on a
periodic basis regardless of a change in value from the
previous report, on a periodic basis if a change in
value has occurred, or the usage is reported when an
identified threshold value in the usage instance has
been reached.
If the ‘periodic’ flag is set, the PEP will provide
unsolicited reports at the rate specified in
frwkFeedbackLinkInterval.
If the ‘periodic’ flag is not set, reports will only be
generated when solicited by the PDP.
The ‘threshold’ and ‘changeOnly’ flags make the
periodic reports conditional - these flags only make
sense in combination with the ‘periodic’ flag."
::= { frwkFeedbackLinkEntry 6}
-- --
-- The filter statistics usage -- All actual usage classes are in the separate
-- FrwkFeedbackUsageClasses group
-- --
frwkFeedbackFilterStatsUsageTable OBJECT-TYPE FrwkFeedbackUsageClasses
SYNTAX SEQUENCE OF FrwkFeedbackFilterStatsUsageEntry OBJECT IDENTIFIER ::= { feedbackPolFrameworkPib 2 }
--
-- The generic traffic (byte & packet count) usage class
--
frwkFeedbackTrafficUsageTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrwkFeedbackTrafficUsageEntry
PIB-ACCESS report-only PIB-ACCESS report-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This class defines the usage attributes that the PEP "This class defines the usage attributes that the PEP
is to monitor, record and report. It contains the is to monitor for plain traffic handling elements
of the PRID of the linkage instance associating like filters. All packets and the bytes contained in
the selection criteria instance with the usage these packets are counted. It also contains the PRID
instance." of the linkage instance associating the selection
criteria instance with the usage instance."
::= { frwkFeedbackGroupClasses 4} ::= { frwkFeedbackUsageClasses 1}
frwkFeedbackFilterStatsUsageEntry OBJECT-TYPE frwkFeedbackTrafficUsageEntry OBJECT-TYPE
SYNTAX FrwkFeedbackFilterStatsUsageEntry SYNTAX FrwkFeedbackTrafficUsageEntry
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Defines the attributes the PEP is to monitor, "Defines the attributes the PEP is to monitor,
record and report." record and report."
PIB-INDEX {frwkFeedbackFilterStatsUsageId} PIB-INDEX {frwkFeedbackTrafficUsageId}
UNIQUENESS { frwkFeedbackFilterStatsUsageLinkPRID } UNIQUENESS { frwkFeedbackTrafficUsageLinkPRID }
::= {frwkFeedbackFilterStatsUsageTable 1} ::= {frwkFeedbackTrafficUsageTable 1}
FrwkFeedbackFilterStatsUsageEntry ::= SEQUENCE {
frwkFeedbackFilterStatsUsageId InstanceID, FrwkFeedbackTrafficUsageEntry ::= SEQUENCE {
frwkFeedbackFilterStatsUsageLinkPRID Prid, FrwkFeedbackTrafficUsageId InstanceID,
frwkFeedbackFilterStatsUsagePacketCount Counter64, frwkFeedbackTrafficUsageLinkPRID Prid,
frwkFeedbackFilterStatsUsageByteCount Counter64, frwkFeedbackTrafficUsagePacketCount Counter64,
fwkFeedbackFilterStatsUsageTimeStamp ExtUTCTime frwkFeedbackTrafficUsageByteCount Counter64
} }
frwkFeedbackFilterStatsUsageId OBJECT-TYPE frwkFeedbackTrafficUsageId OBJECT-TYPE
SYNTAX InstanceId SYNTAX InstanceId
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Arbitrary integer index that uniquely identifies "Arbitrary integer index that uniquely identifies
an instance of the class." an instance of the class."
::= { frwkFeedbackFilterStatsUsageEntry 1 } ::= { frwkFeedbackTrafficUsageEntry 1 }
frwkFeedbackFilterStatsUsageLinkPRID OBJECT-TYPE frwkFeedbackTrafficUsageLinkPRID OBJECT-TYPE
SYNTAX Prid SYNTAX Prid
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The PRID of the Linkage policy instance used to base "The PRID of the Linkage policy instance used to base
this usage policy instance upon." this usage policy instance upon."
::= { frwkFeedbackFilterStatsUsageEntry 2 } ::= { frwkFeedbackTrafficUsageEntry 2 }
frwkFeedbackFilterStatsUsagePacketCount OBJECT-TYPE frwkFeedbackTrafficUsagePacketCount OBJECT-TYPE
SYNTAX Counter64 SYNTAX Counter64
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The count of packets matching the specified filter "The count of packets handled by the associated
during the reporting interval." element during the reporting interval."
::= {frwkFeedbackFilterStatsUsageEntry 3} ::= {frwkFeedbackTrafficUsageEntry 3}
frwkFeedbackFilterStatsUsageByteCount OBJECT-TYPE frwkFeedbackTrafficUsageByteCount OBJECT-TYPE
SYNTAX Counter64 SYNTAX Counter64
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The byte count of packets matching the "The byte count of packets handled by the associated
specified filter during the reporting interval." element."
::= { frwkFeedbackTrafficUsageEntry 4}
::= { frwkFeedbackFilterStatsUsageEntry 4} --
-- The traffic usage class, qualified for an interface
--
frwkFeedbackFilterStatsSelectTimeStamp OBJECT-TYPE frwkFeedbackIfTrafficUsageTable OBJECT-TYPE
SYNTAX ExtUTCTime SYNTAX SEQUENCE OF FrwkFeedbackIfTrafficUsageEntry
PIB-ACCESS report-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The last timestamp when a packet was received." "A usage PRC similar to the basic TrafficUsage class
that also contains a reference to an interface. This
class should be used with a selection criteria that
matches an element that is assigned to multiple
interfaces. The interface field can be used to
associate the instances of this class with the specific
element’s assignment."
::= { frwkFeedbackUsageClasses 2 }
::= { frwkFeedbackFilterStatsSelectEntry 5} frwkFeedbackIfTrafficUsageEntry OBJECT-TYPE
SYNTAX FrwkFeedbackIfTrafficUsageEntry
STATUS current
DESCRIPTION
"Defines the attributes the PEP is to monitor,
record and report."
PIB-INDEX {frwkFeedbackIfTrafficUsageId}
UNIQUENESS { frwkFeedbackIfTrafficUsageLinkPRID,
frwkFeedbackIfTrafficUsageInterface }
::= {frwkFeedbackTrafficUsageTable 1}
FrwkFeedbackIfTrafficUsageEntry ::= SEQUENCE {
FrwkFeedbackIfTrafficUsageId InstanceID,
frwkFeedbackIfTrafficUsageLinkPRID Prid,
frwkFeedbackIfTrafficUsageInterface Prid,
frwkFeedbackIfTrafficUsagePacketCount Counter64,
frwkFeedbackIfTrafficUsageByteCount Counter64
}
frwkFeedbackIfTrafficUsageId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"Arbitrary integer index that uniquely identifies
an instance of the class."
::= { frwkFeedbackIfTrafficUsageEntry 1 }
frwkFeedbackIfTrafficUsageLinkPRID OBJECT-TYPE
SYNTAX Prid
STATUS current
DESCRIPTION
"The PRID of the Linkage policy instance used to base
this usage policy instance upon."
::= { frwkFeedbackIfTrafficUsageEntry 2 }
frwkFeedbackIfTrafficUsageInterface OBJECT-TYPE
SYNTAX Prid
STATUS current
DESCRIPTION
"The PRID of a frwkIfRoleCombo instance, uniquely
identifying a specific interface."
::= { frwkFeedbackIfTrafficUsageEntry 3 }
frwkFeedbackIfTrafficUsagePacketCount OBJECT-TYPE
SYNTAX Counter64
STATUS current
DESCRIPTION
"The count of packets handled by the associated element
during the reporting interval."
::= { frwkFeedbackIfTrafficUsageEntry 4 }
frwkFeedbackIfTrafficUsageByteCount OBJECT-TYPE
SYNTAX Counter64
STATUS current
DESCRIPTION
"The byte count of packets
handled by the associated element."
::= { frwkFeedbackIfTrafficUsageEntry 5 }
--
-- The Threshold class that accompanies the above Usage PRCs
--
frwkFeedbackTrafficThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrwkFeedbackTrafficThresholdEntry
PIB-ACCESS Install
STATUS current
DESCRIPTION
"This class defines the threshold attributes
corresponding to usage attributes specified in
frwkFeedbackTrafficUsageTable,
frwkFeedbackIfTrafficUsageTable and other similar
usage classes.
The usage object is considered to match the threshold
condition if the following expression evaluates to
‘TRUE’:
{
byteCond = (ByteThreshold != NULL) ?
(ByteThreshold > ByteCounter) : FALSE;
packetCond (PacketThreshold != NULL) ?
(PacketThreshold > PacketCounter) : FALSE;
return ( byteCond || packetCond );
}"
::= { frwkFeedbackUsageClasses 3}
frwkFeedbackTrafficThresholdEntry OBJECT-TYPE
SYNTAX FrwkFeedbackTrafficThresholdEntry
STATUS current
DESCRIPTION
"Defines the attributes to hold threshold values."
PIB-INDEX {frwkFeedbackTrafficThresholdId}
::= {frwkFeedbackTrafficThresholdTable 1}
FrwkFeedbackTrafficThresholdEntry ::= SEQUENCE {
FrwkFeedbackTrafficThresholdId InstanceID,
frwkFeedbackTrafficThresholdPacketThreshold Integer64,
frwkFeedbackTrafficThresholdByteThreshold Integer64
}
frwkFeedbackIfTrafficThresholdId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"Arbitrary integer index that uniquely identifies
an instance of the class."
::= { frwkFeedbackIfTrafficThresholdEntry 1 }
frwkFeedbackIfTrafficThresholdPacketThreshold OBJECT-TYPE
SYNTAX Integer64
STATUS current
DESCRIPTION
"The threshold, in terms of packets, that must be
exceeded to trigger a report in the next
reporting interval."
::= { frwkFeedbackIfTrafficThresholdEntry 2 }
frwkFeedbackIfTrafficThresholdByteThreshold OBJECT-TYPE
SYNTAX Integer64
STATUS current
DESCRIPTION
"The threshold, in terms of bytes, that must be
exceeded to trigger a report in the next
reporting interval."
::= { frwkFeedbackIfTrafficThresholdEntry 3 }
--
-- All Selection classes are in the separate
-- FrwkFeedbackSelectionClasses group
--
FrwkFeedbackSelectionClasses
OBJECT IDENTIFIER ::= { feedbackPolFrameworkPib 3 }
--
-- The Set WatchPoint Table
--
frwkFeedbackSetWatchPointTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrwkFeedbackSetWatchPointEntry
PIB-ACCESS Install
STATUS current
DESCRIPTION
"This class defines a selection criteria that
identifies a specific processing point to watch
for the desired usage. This selection criteria
may be useful in PIBs that are designed using a
datapath approach where the policies are linked
and can be reused within the PIB."
::= { frwkFeedbackSelectionClasses 1}
frwkFeedbackSetWatchPointEntry OBJECT-TYPE
SYNTAX FrwkFeedbackSetWatchPointEntry
STATUS current
DESCRIPTION
"Defines the attributes the of the selection
criteria identifying a specific policy
where to monitor the associated usage."
PIB-INDEX { frwkFeedbackSetWatchPointId }
::= {frwkFeedbackSetWatchPointTable 1}
FrwkFeedbackSetWatchPointEntry ::= SEQUENCE {
frwkFeedbackSetWatchPointId InstanceID,
frwkFeedbackSetWatchPointPolicyPRID Prid,
}
frwkFeedbackSetWatchPointId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"Arbitrary integer index that uniquely identifies
an instance of the class."
::= { frwkFeedbackSetWatchPointEntry 1 }
frwkFeedbackSetWatchPointPolicyPRID OBJECT-TYPE
SYNTAX Prid
STATUS current
DESCRIPTION
"The PRID of the enforcement policy instance where
the associated usage is to be monitored."
::= { frwkFeedbackSetWatchPointEntry 2 }
--
-- DPE Selection Class
--
frwkFeedbackDPESelectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF frwkFeedbackDPESelectionEntry
PIB-ACCESS Install
STATUS current
DESCRIPTION
"This class defines a selection criteria that
identifies a specific data path element to collect
usage information"
::= { frwkFeedbackSelectionClasses 2}
frwkFeedbackDPESelectionEntry OBJECT-TYPE
SYNTAX frwkFeedbackDPESelecyionEntry
STATUS current
DESCRIPTION
"Defines the attributes the of the selection
criteria identifying a specific policy
where to monitor the associated usage."
PIB-INDEX { frwkFeedbackDPESelectionId }
UNIQUENESS { frwkFeedbackDPESelectionDataPathElement,
frwkFeedbackDPESelectionInterface,
frwkFeedbackDPESelectionIfDirection }
::= {frwkFeedbackDPESelectionTable 1}
frwkFeedbackDPESelectionEntry ::= SEQUENCE {
frwkFeedbackDPESelectionId InstanceId,
frwkFeedbackDPESelectionDataPathElement Prid,
frwkFeedbackDPESelectionInterface Prid,
frwkFeedbackDPESelectionIfDirection IfDirection
}
frwkFeedbackDPESelectionId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"Arbitrary integer index that uniquely identifies
an instance of the class."
::= { frwkFeedbackDPESelectionEntry 1 }
frwkFeedbackDPESelectionDataPathElement OBJECT-TYPE
SYNTAX Prid
STATUS current
DESCRIPTION
"The PRID of the element in the data path that we
want to collect usage information from. This element
must be part of the data path assigned to the
interface/direction combination referenced in this
object."
::= { frwkFeedbackDPESelectionEntry 2 }
frwkFeedbackDPESelectionInterface OBJECT-TYPE
SYNTAX Prid
STATUS current
DESCRIPTION
"The PRID of a frwkIfRoleCombo instance, uniquely
identifying a specific interface"
::= { frwkFeedbackDPESelectionEntry 3 }
frwkFeedbackDPESelectionIfDirection OBJECT-TYPE
SYNTAX IfDirection
STATUS current
DESCRIPTION
"The direction (ingress/egress) that to which the DPE
is attached that we want to match."
::= { frwkFeedbackDPESelectionEntry 4 }
--
-- DPE Selection Query Class
--
frwkFeedbackDPESelectionQueryTable OBJECT-TYPE
SYNTAX SEQUENCE OF frwkFeedbackDPESelectionQueryEntry
PIB-ACCESS Install
STATUS current
DESCRIPTION
"This class defines a selection criteria that
identifies a set of assignments of a data path element
based on an entry in the Data Path Table
Each matched assignment will collect and report usage
independently, so this selection criteria should be
combined with a Usage PRC that includes an interface
reference."
::= { frwkFeedbackSelectionClasses 3}
frwkFeedbackDPESelectionQueryEntry OBJECT-TYPE
SYNTAX frwkFeedbackDPESelectionQueryEntry
STATUS current
DESCRIPTION
"Defines the attributes the of the selection
criteria identifying a specific policy
where to monitor the associated usage."
PIB-INDEX { frwkFeedbackDPESelectionQueryId }
UNIQUENESS { frwkFeedbackDPESelectionQueryDataPath,
FrwkFeedbackDPESelectionQueryDataPathElement }
::= {frwkFeedbackDPESelectionQueryTable 1}
frwkFeedbackDPESelectionQueryEntry ::= SEQUENCE {
frwkFeedbackDPESelectionQueryId InstanceId,
frwkFeedbackDPESelectionQueryDataPath Prid,
frwkFeedbackDPESelectionQueryDataPathElement Prid
}
frwkFeedbackDPESelectionQueryId OBJECT-TYPE
SYNTAX InstanceId
STATUS current
DESCRIPTION
"Arbitrary integer index that uniquely identifies
an instance of the class."
::= { frwkFeedbackDPESelectionQueryEntry 1 }
frwkFeedbackDPESelectionQueryDataPath OBJECT-TYPE
SYNTAX Prid
STATUS current
DESCRIPTION
"The PRID of a Data Path instance, identifying a
group of data path assignments."
::= { frwkFeedbackDPESelectionQueryEntry 2 }
frwkFeedbackDPESelectionQueryDataPathElement OBJECT-TYPE
SYNTAX Prid
STATUS current
DESCRIPTION
"The PRID of the element in the data path that we
want to collect usage information from. This element
must be part of the data path referenced from the
frwkFeedbackDPESelectionQueryDataPath field."
::= { frwkFeedbackDPESelectionQueryEntry 3 }
END END
5 Security Considerations 5 Security Considerations
The feedback information is sensitive and requires that authorized The feedback information is sensitive and requires that authorized
messaging occur between the PEP and the PDP. This protection can messaging occur between the PEP and the PDP. This protection can
be accomplished with IPSEC between the PEP and the PDP or using be accomplished with IPSEC between the PEP and the PDP or using
the security mechanisms described in the base COPS protocol. the security mechanisms described in the base COPS protocol.
skipping to change at page 15, line 40 skipping to change at page 26, line 31
Phone: 503-712-1168 Phone: 503-712-1168
Email: amol.kulkarni@intel.com Email: amol.kulkarni@intel.com
Kwok Ho Chan Kwok Ho Chan
Nortel Networks, Inc. Nortel Networks, Inc.
600 Technology Park Drive 600 Technology Park Drive
Billerica, MA 01821 USA Billerica, MA 01821 USA
Phone: 978-288-8175 Phone: 978-288-8175
Email: khchan@nortelnetworks.com Email: khchan@nortelnetworks.com
Martin Bokaemper
Unisphere Networks
700 Silver Seven Road
Kanata, ON, K2V 1C3, Canada
Phone: 613-591-2735
Email: mbokaemper@unispherenetworks.com
Dinesh G Dutt Dinesh G Dutt
Cisco Systems, Inc. Cisco Systems, Inc.
170 Tasman Dr. 170 Tasman Dr.
San Jose, CA 95134-1706 San Jose, CA 95134-1706
Phone: 408-527-0955 Phone: 408-527-0955
Email: ddutt@cisco.com Email: ddutt@cisco.com
Martin Bokaemper
Unisphere Networks
700 Silver Seven Road
Kanata, On, K2V 1C3
Canada
Phone: +1 (613) 591 2735
EMail: mbokaemper@unispherenetworks.com
8 References 8 References
[FEEDBACKfWK] Rawlins, D., Kulkarni, A., "Framework of COPS-PR
Policy Usage Feedback", draft-ietf-rap-feedback-frwk-01.txt,
November 2001.
[COPS] Boyle, J., Cohen, R., Durham, D., Herzog, S., Rajan, R., [COPS] Boyle, J., Cohen, R., Durham, D., Herzog, S., Rajan, R.,
and A. Sastry, "The COPS (Common Open Policy Service) Protocol" and A. Sastry, "The COPS (Common Open Policy Service) Protocol"
RFC 2748, January 2000. RFC 2748, January 2000.
[COPS-FEED-FRWK] D. Rawlins, A. Kulkarni, "Framework of COPS-PR [3084] K. Chan, D. Durham, S. Gai, S. Herzog, K. McCloghrie, F.
Policy Usage Feedback", draft-ietf-rap-feedback-frwk-00.txt, July
2001
[COPS-PR] K. Chan, D. Durham, S. Gai, S. Herzog, K. McCloghrie, F.
Reichmeyer, J. Seligson, A. Smith, R. Yavatkar, "COPS Usage for Reichmeyer, J. Seligson, A. Smith, R. Yavatkar, "COPS Usage for
Policy Provisioning," draft-ietf-rap-cops-pr-05.txt, March 2000. Policy Provisioning," RFC 3084, May 2001.
[SPPI] K. McCloghrie, et.al., "Structure of Policy Provisioning
Information," RFC 3159, August 2001.
[DIFFSERV-PIB] Fine, M., McCloghrie, K., Seligson, J., Chan, K.,
Hahn, S., Bell, C., Smith, A. and Reichmeyer, A. "Differentiated
Services Quality of Service Policy Information Base", draft-ietf-
diffserv-pib-05.txt, November 2001
[FR-PIB] M. Fine, K. McCloghrie, J. Seligson, K. Chan, S. Hahn, A. [FR-PIB] M. Fine, K. McCloghrie, J. Seligson, K. Chan, S. Hahn, A.
Smith, F. Reichmeyer "Framework Policy Information Base", draft- Smith, F. Reichmeyer "Framework Policy Information Base", draft-
ietf-rap-frameworkpib-03.txt, November 2000 ietf-rap-frameworkpib-06.txt, November 2001
[SPPI] K. McCloghrie, et.al., "Structure of Policy Provisioning
Information," draft-ietf-rap-sppi-05.txt, February 2001.
 End of changes. 

This html diff was produced by rfcdiff 1.23, available from http://www.levkowetz.com/ietf/tools/rfcdiff/