--- 1/draft-ietf-roll-terminology-08.txt	2013-01-17 10:43:32.756041021 +0100
+++ 2/draft-ietf-roll-terminology-09.txt	2013-01-17 10:43:32.772041762 +0100
@@ -1,17 +1,18 @@
+
 Networking Working Group                                     JP. Vasseur
 Internet-Draft                                        Cisco Systems, Inc
-Intended status: Informational                         December 12, 2012
-Expires: June 15, 2013
+Intended status: Informational                          January 17, 2013
+Expires: July 21, 2013
 
               Terminology in Low power And Lossy Networks
-                   draft-ietf-roll-terminology-08.txt
+                   draft-ietf-roll-terminology-09.txt
 
 Abstract
 
    The documents defines a terminology for discussing routing
    requirements and solutions for networks referred to as Low power and
    Lossy Networks (LLN).  A LLN is typically composed of many embedded
    devices with limited power, memory, and processing resources
    interconnected by a variety of links.  There is a wide scope of
    application areas for LLNs, including industrial monitoring, building
    automation (e.g.  Heating, Ventilating, Air Conditioning, lighting,
@@ -33,48 +34,48 @@
    Internet-Drafts are working documents of the Internet Engineering
    Task Force (IETF).  Note that other groups may also distribute
    working documents as Internet-Drafts.  The list of current Internet-
    Drafts is at http://datatracker.ietf.org/drafts/current/.
 
    Internet-Drafts are draft documents valid for a maximum of six months
    and may be updated, replaced, or obsoleted by other documents at any
    time.  It is inappropriate to use Internet-Drafts as reference
    material or to cite them other than as "work in progress."
 
-   This Internet-Draft will expire on June 15, 2013.
+   This Internet-Draft will expire on July 21, 2013.
 
 Copyright Notice
 
-   Copyright (c) 2012 IETF Trust and the persons identified as the
+   Copyright (c) 2013 IETF Trust and the persons identified as the
    document authors.  All rights reserved.
 
    This document is subject to BCP 78 and the IETF Trust's Legal
    Provisions Relating to IETF Documents
    (http://trustee.ietf.org/license-info) in effect on the date of
    publication of this document.  Please review these documents
    carefully, as they describe your rights and restrictions with respect
    to this document.  Code Components extracted from this document must
    include Simplified BSD License text as described in Section 4.e of
    the Trust Legal Provisions and are provided without warranty as
    described in the Simplified BSD License.
 
 Table of Contents
 
    1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . 3
    2.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . 3
    3.  IANA Considerations . . . . . . . . . . . . . . . . . . . . . . 6
-   4.  Security Considerations . . . . . . . . . . . . . . . . . . . . 6
+   4.  Security Considerations . . . . . . . . . . . . . . . . . . . . 7
    5.  Acknowledgements  . . . . . . . . . . . . . . . . . . . . . . . 7
    6.  References  . . . . . . . . . . . . . . . . . . . . . . . . . . 7
      6.1.  Normative References  . . . . . . . . . . . . . . . . . . . 7
      6.2.  Informative References  . . . . . . . . . . . . . . . . . . 7
-   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . . . 7
+   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . . . 8
 
 1.  Introduction
 
    This document defines a terminology for discussing routing
    requirements and solutions for networks referred to as Low power and
    Lossy Networks (LLN).
 
    Low power and Lossy networks (LLNs) are typically composed of many
    embedded devices with limited power, memory, and processing resources
    interconnected by a variety of links, such as IEEE 802.15.4, Low
@@ -221,20 +222,25 @@
    towards other nodes contained in the DAG.
 
    RAM: Random Access Memory.  The RAM is a volatile memory.
 
    RFID: Radio Frequency IDentification.
 
    ROM: Read Only Memory.
 
    ROLL: Routing Over Low power and Lossy networks.
 
+   RPL Domain: A RPL routing domain is a collection of RPL routers under
+   the control of a single administration.  The boundaries of routing
+   domains are defined by network management by setting some links to be
+   exterior, or inter-domain, links.
+
    Schedule: An agreed execution, wake-up, transmission, reception,
    etc., time-table between two or more field devices.
 
    Sensor: A sensor is a device that measures a physical quantity and
    converts it to a analog or digital signal that can be read by a
    program or a user.  Sensed data can be of many types: electromagnetic
    (e.g. current, voltage, power, resistance, ...) , mechanical (e.g.
    pressure, flow, liquid density, humidity, ...), chemical (e.g.
    oxygen, carbon monoxide, ...), acoustic (e.g. noise, ultrasound), ...
 
@@ -255,22 +261,22 @@
    This document includes no request for IANA action.
 
 4.  Security Considerations
 
    Since this document specifies terminology and does not specify new
    procedure or protocols, it raises no new security issue.
 
 5.  Acknowledgements
 
    The authors would like to thank Christian Jacquenet, Tim Winter,
-   Pieter De Mil, David Meyer and Abdussalam Baryun for their valuable
-   feed-back.
+   Pieter De Mil, David Meyer, Mukul Goyal and Abdussalam Baryun for
+   their valuable feed-back.
 
 6.  References
 
 6.1.  Normative References
 
    [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
               Requirement Levels", BCP 14, RFC 2119, March 1997.
 
 6.2.  Informative References