draft-ietf-tn3270e-tn3270-mib-00.txt   draft-ietf-tn3270e-tn3270-mib-01.txt 
TN3270E Working Group TN3270E Working Group
INTERNET DRAFT: <draft-ietf-tn3270e-tn3270-mib-00.txt) Kenneth White INTERNET DRAFT: <draft-ietf-tn3270e-tn3270-mib-01.txt) Kenneth White
Expiration Date: November, 1997 Expiration Date: December, 1997
IBM Corp. IBM Corp.
Definitions of Managed Objects for Base Definitions of Managed Objects for
TN3270 Using SMIv2 TN3270E Using SMIv2
<draft-ietf-tn3270e-tn3270-mib-00.txt> <draft-ietf-tn3270e-tn3270-mib-01.txt>
Status of this Memo Status of this Memo
This document is an Internet Draft. Internet Drafts are working This document is an Internet Draft. Internet Drafts are working
documents of the Internet Engineering Task Force (IETF), its Areas, documents of the Internet Engineering Task Force (IETF), its Areas,
and its Working Groups. Note that other groups may also distribute and its Working Groups. Note that other groups may also distribute
working documents as Internet Drafts. working documents as Internet Drafts.
Internet Drafts are draft documents valid for a maximum of six Internet Drafts are draft documents valid for a maximum of six
months. Internet Drafts may be updated, replaced, or obsoleted by months. Internet Drafts may be updated, replaced, or obsoleted by
other documents at any time. It is not appropriate to use Internet other documents at any time. It is not appropriate to use Internet
Drafts as reference material or to cite them other than as a "working Drafts as reference material or to cite them other than as a "working
draft" or "work in progress." draft" or "work in progress."
Please check the I-D abstract listing contained in each Internet Please check the I-D abstract listing contained in each Internet
Draft directory to learn the current status of this or any Internet Draft directory to learn the current status of this or any Internet
Draft. Distribution of this document is unlimited. Draft. Distribution of this document is unlimited.
Abstract Abstract
The purpose of this memo is to define the Management Information Base The purpose of this memo is to define a
(MIB) for configuring and monitoring TN3270 and TN3270E sessions. Management Information Base
The monitoring portion of the MIB is limited to AUGMENTation of (MIB) for configuring and managing TN3270E Servers.
the TCP Connection Table (RFC 2012) with a set of objects collected The MIB defined by this memo is intended to provide generic
from the TCP Layer. It is the intent of this MIB to support for both Host and Gateway TN3270E Server implementations.
It is the intent that the MIB defined herein be extended
by subsequent memos to provide non-generic configuration support
and to enable TN3270E Response Time Monitoring.
It is the intent of this MIB to
fully adhere to all prerequisite MIBs unless explicitly stated. fully adhere to all prerequisite MIBs unless explicitly stated.
Deviations will be documented in corresponding conformance statements. Deviations will be documented in corresponding conformance statements.
The specification of this MIB will utilize the The specification of this MIB will utilize the
Structure of Management Information (SMI) for Version 2 of the Structure of Management Information (SMI) for Version 2 of the
Simple Network Management Protocol Version (refer to RFC1902, Simple Network Management Protocol Version (refer to RFC1902,
reference [1]). reference [1]).
Table of Contents Table of Contents
Expires November 1997 [Page 1]~
1.0 Introduction............................................. 2 1.0 Introduction............................................. 2
2.0 The SNMPv2 Network Management Framework.................. 2 2.0 The SNMPv2 Network Management Framework.................. 2
2.1 Object Definitions....................................... 3 2.1 Object Definitions....................................... 3
3.0 Structure of the MIB..................................... 3 3.0 Structure of the MIB..................................... 3
3.1 Base TN3270 MIB Definitions.............................. 3 3.1 TN3270E Server Control................................... 3
3.2 MIB Definitions for AUGMENTing the TCP Connection Table.. 3 3.1.1 tn3270eSrvrConfTable................................... 3
4.0 Definitions.............................................. 4 3.1.2 tn3270eSrvrPortTable................................... 4
5.0 Security Considerations.................................. 30 3.1.3 tn3270eSrvrStatsTable.................................. 4
6.0 Acknowledgments.......................................... 31 3.2 TN3270E Server Resource Configuration.................... 5
7.0 References............................................... 31 3.2.1 tn3270eIpGroupTable and tn3270eResPoolTable............ 5
8.0 Authors' Addresses....................................... 33 3.2.2 tn3270eResMapTable and tn3270eIpMapTable............... 5
3.3 TCP Connection Table Additions........................... 5
4.0 Definitions.............................................. 6
5.0 Security Considerations..................................29
6.0 Acknowledgments..........................................30
7.0 References...............................................30
8.0 Authors' Address.........................................31
1. Introduction 1. Introduction
This document is a product of the TN3270E Working Group. Its purpose This document is a product of the TN3270E Working Group. Its purpose
is to define a MIB module for extending the traditional MIBs supported is to define a MIB module for extending the traditional MIBs supported
by a TCP/IP implementation for configuring and monitoring of TN3270 by a TCP/IP implementation for configuration and management of TN3270E
and TN3270E sessions. Servers.
2. The SNMPv2 Network Management Framework 2. The SNMPv2 Network Management Framework
The SNMP Network Management Framework presently consists of three The SNMP Network Management Framework presently consists of three
major components. They are: major components. They are:
o the SMI, described in RFC 1902 [1], - the mechanisms used for o the SMI, described in RFC 1902 [1], - the mechanisms used for
describing and naming objects for the purpose of management. describing and naming objects for the purpose of management.
o the MIB-II, STD 17, RFC 1213 [5], - the core set of managed o the MIB-II, STD 17, RFC 1213 [5], - the core set of managed
skipping to change at line 89 skipping to change at page 3, line 9
Textual conventions are defined in RFC 1903 [6], and conformance Textual conventions are defined in RFC 1903 [6], and conformance
statements are defined in RFC 1904 [8]. statements are defined in RFC 1904 [8].
The Framework permits new objects to be defined for the purpose of The Framework permits new objects to be defined for the purpose of
experimentation and evaluation. experimentation and evaluation.
This memo specifies a MIB module that is compliant to the SNMPv2 SMI. This memo specifies a MIB module that is compliant to the SNMPv2 SMI.
A semantically identical MIB conforming to the SNMPv1 SMI can be A semantically identical MIB conforming to the SNMPv1 SMI can be
produced through the appropriate translation. produced through the appropriate translation.
Expires November 1997 [Page 2]~
2.1. Object Definitions 2.1. Object Definitions
Managed objects are accessed via a virtual information store, termed Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. Objects in the MIB are the Management Information Base or MIB. Objects in the MIB are
defined using the subset of Abstract Syntax Notation One (ASN.1) defined using the subset of Abstract Syntax Notation One (ASN.1)
defined in the SMI. In particular, each object object type is named defined in the SMI. In particular, each object object type is named
by an OBJECT IDENTIFIER, an administratively assigned name. The by an OBJECT IDENTIFIER, an administratively assigned name. The
object type together with an object instance serves to uniquely object type together with an object instance serves to uniquely
identify a specific instantiation of the object. For human identify a specific instantiation of the object. For human
convenience, we often use a textual string, termed the descriptor, to convenience, we often use a textual string, termed the descriptor, to
refer to the object type. refer to the object type.
3. Structure of the MIB 3. Structure of the MIB
The TN3270-MIB is split into the following components: The TN3270E-MIB is split into the following components:
o Base TN3270 MIB Definitions o TN3270E Server Control
o MIB Definitions for AUGMENTing the TCP Connection Table o TN3270E Server Resource Configuration
o TCP Connection Table Additions
3.1. Base TN3270 MIB Definitions The TN3270E-MIB is defined for support primarily by TN3270E Servers.
Use of this MIB by TN3270 Servers that do not support the TN3270E
protocol is not explicitly addressed by this memo. A significant
portion of the objects do apply in the TN3270 only case. Addressing
the TN3270 only case was not done since it is unlikely that this MIB
would be implemented by TN3270 only servers.
The collection of MIB Objects defined by the tn3270BasicGroup. This 3.1. TN3270E Server Control
group of objects provides for TN3270 and TN3270E configuration.
3.2. MIB Definitions for AUGMENTing the TCP Connection Table This group of objects provides for TN3270 and TN3270E configuration
and consists of:
o tn3270eSrvrConfTable
o tn3270eSrvrPortTable
o tn3270eSrvrStatsTable
3.1.1. tn3270eSrvrConfTable
The tn3270eSrvrConfTable contains a set of objects primarily for
configuring and managing a TN3270E Server. This table, as well most of
the tables in the TN3270E-MIB, are structured to be indexed by the
local IP Address (tn3270eSrvrConfIpAddr) and a unsigned integer
(tn3270eSrvrConfIndex). The primary index, tn3270eSrvrConfIpAddr, was
added to the tables in order for the tables to be used at both a
TN3270E Server host implementation as well as by a management
application that supports multiple TN3270E capable hosts. The second
index element, tn3270eSrvrConfigIndex, was added in order to support
multiple TN3270E Servers on the same host.
tn3270eSrvrConfInactivityTimer defines the inactivity period for
TN3270 and TN3270E Sessions. tn3270eSrvrConfSessionTermState defines
how a session should be terminated. The three objects:
o tn3270eSrvrConfActivityCheck
o tn3270eSrvrConfActivityTimeout
o tn3270eSrvrConfActivityInterval
defines the parameters for performing the "Telnet Timing Mark Option"
as defined by RFC 860 [3]. The object tn3270eSrvrConfActivityOption
was defined to enable sending of a NOP command as oppose to a TIMEMARK
command. Sending a NOP command results in less overhead then a
TIMEMARK command since a client doesn't send a reply.
The objects tn3270eSrvrConfAdminStatus and tn3270eSrvrConfOperStatus
exists in order to enable remote starting and stopping of a TN3270E
Server. tn3270eSrvrConfProtoSupported indicates which of the TN3270
and TN3270E options that a server supports. The object
tn3270eSrvrConfSrvrType indicates the implementation type of TN3270E
Server that the tn3270eSrvrConfEntry represents. The object
tn3270eSrvrConfRowStatus provides the capability to perform remote
creation and deletion operations on this table.
3.1.2. tn3270eSrvrPortTable
The tn3270eSrvrPortTable exists in order to assign and retrieve the
local ports associated with a TN3270E Server. Some implementations
support multiple local port usage.
3.1.3. tn3270eSrvrStatsTable
The tn3270eSrvrStatsTable defines a series of objects used to provide
general statistics on the use of a TN3270E Server.
3.2. TN3270E Server Resource Configuration
The TN3270E Server Resource Configuration collection of objects consists
of four tables:
o tn3270eIpGroupTable
o tn3270eResPoolTable
o tn3270eResMapTable
o tn3270eIpMapTable
3.2.1. tn3270eIpGroupTable and tn3270eResPoolTable enable
implementations to define groupings of both IP Addresses and Resource
Pools for mapping IP Addresses to resources. The mapping of a IP Group
to a Resource Pool is enabled via tn3270eResPoolIpGroupName. Creating
an entry in the tn3270eResPoolTable results in creation of an entry or
entries in both the tn3270eResMapTable and tn3270eIpMapTable. Both the
tn3270eIpGroupTable and the tn3270eResPoolTable are optional since not
every TN3270E Server has the ability to define their IP to Resource
mappings in this manner. tn3270eResPoolClientPort exists to enable
implementations to restrict a collection of resources to a particular
local port. This object is optional since not every implementation
provides this type of support.
3.2.2. tn3270eResMapTable and tn3270eIpMapTable
The tables: tn3270eResMapTable and tn3270eIpMapTable provide mappings
of IP Address(es) to Resource(s) and Resource(s) to IP Address(es).
The index objects, tn3270eResMapClientPort and tn3270eIpMapClientPort,
as allowed to be zero when these tables are implemented by TN3270E
Servers that do provide local port to resource mapping.
3.3. TCP Connection Table Additions
The TCP Connection Table is defined by RFC 2012 (Refer to reference The TCP Connection Table is defined by RFC 2012 (Refer to reference
10, TCP-MIB Definitions). Traditionally, the contents of the TCP 10, TCP-MIB Definitions). Traditionally, the contents of the TCP
Connection Table has been implementation dependent. Its formal Connection Table has been implementation dependent. Its formal
definition consists of the following objects: definition consists of the following objects:
o tcpConnState (INTEGER) o tcpConnState (INTEGER)
o tcpConnLocalAddress (IpAddress) o tcpConnLocalAddress (IpAddress)
o tcpConnLocalPort (INTEGER) o tcpConnLocalPort (INTEGER)
o tcpConnRemAddress (IpAddress) o tcpConnRemAddress (IpAddress)
skipping to change at line 127 skipping to change at page 6, line 4
The TCP Connection Table is defined by RFC 2012 (Refer to reference The TCP Connection Table is defined by RFC 2012 (Refer to reference
10, TCP-MIB Definitions). Traditionally, the contents of the TCP 10, TCP-MIB Definitions). Traditionally, the contents of the TCP
Connection Table has been implementation dependent. Its formal Connection Table has been implementation dependent. Its formal
definition consists of the following objects: definition consists of the following objects:
o tcpConnState (INTEGER) o tcpConnState (INTEGER)
o tcpConnLocalAddress (IpAddress) o tcpConnLocalAddress (IpAddress)
o tcpConnLocalPort (INTEGER) o tcpConnLocalPort (INTEGER)
o tcpConnRemAddress (IpAddress) o tcpConnRemAddress (IpAddress)
o tcpConnRemPort (INTEGER) o tcpConnRemPort (INTEGER)
and is indexed by: tcpConnLocalAddress, tcpConnLocalPort, and is indexed by: tcpConnLocalAddress, tcpConnLocalPort,
tcpConnRemAddress and tcpConnRemPort. The tn3270TcpConnTableGroup tcpConnRemAddress and tcpConnRemPort. The tn3270eTcpConnTableGroup
contains the objects defined by the tn3270TcpConnTable for AUGMENTing contains the objects defined by the tn3270eTcpConnTable for keeping a
the tcpConnTable. The objects contained within the list of the current set of TN3270 and TN3270E sessions at a TN3270E
tn3270TcpConnTableGroup can be set by either a TN3270 or TN3270E Server. The tn3270eTcpConnTable has the same index elements as the
Server or if TCP specific by the TCP Stack. tcpConnTable but doesn't AUGMENT it since the relationship is not
one-to-one.
Expires November 1997 [Page 3]~
4. Definitions 4. Definitions
TN3270-MIB DEFINITIONS ::= BEGIN TN3270E-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, MODULE-IDENTITY, OBJECT-TYPE, BITS, Unsigned32,
experimental, Integer32, IpAddress, TimeTicks experimental, Integer32, IpAddress, TimeTicks,
Counter32
FROM SNMPv2-SMI FROM SNMPv2-SMI
TEXTUAL-CONVENTION, RowStatus, TruthValue, TEXTUAL-CONVENTION, RowStatus, DisplayString
DisplayString
FROM SNMPv2-TC FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF FROM SNMPv2-CONF
InterfaceIndex, InterfaceIndexOrZero tcpConnLocalAddress, tcpConnLocalPort,
FROM IF-MIB tcpConnRemAddress, tcpConnRemPort
tcpConnEntry
FROM TCP-MIB FROM TCP-MIB
; ;
tn3270MIB MODULE-IDENTITY tn3270eMIB MODULE-IDENTITY
LAST-UPDATED "9705300000Z" -- May 30, 1997 LAST-UPDATED "9706200000Z" -- June 20, 1997
ORGANIZATION "TN3270E Working Group" ORGANIZATION "TN3270E Working Group"
CONTACT-INFO CONTACT-INFO
"Kenneth White (kennethw@vnet.ibm.com) "Kenneth White (kennethw@vnet.ibm.com)
IBM Corp." IBM Corp."
DESCRIPTION DESCRIPTION
"This module defines a portion of the management "This module defines a portion of the management
information base (MIB) for configuring and monitoring information base (MIB) for managing TN3270E Servers"
TN3270 and TN3270E sessions."
-- Need an experimental OID from IANA -- Need an experimental OID from IANA
::= { experimental 2001 } ::= { experimental 2001 }
-- Textual Conventions -- Textual Conventions
VariableName ::= TEXTUAL-CONVENTION ResourceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A up to 8 octet string name, were a percent sign, '%',
can be used to represent one arbitrary character or an
asterisk , '*', to represent an arbitrary string of
characters. If an asterisk is specified it must appear
as the last character in the octet string."
SYNTAX DisplayString (SIZE(1..8))
-- Top-level structure of the MIB
tn3270Objects OBJECT IDENTIFIER ::= { tn3270MIB 1 }
Expires November 1997 [Page 4]~
tn3270Notifications OBJECT IDENTIFIER ::= { tn3270MIB 2 }
tn3270Conformance OBJECT IDENTIFIER ::= { tn3270MIB 3 }
-- MIB Objects
tn3270Control OBJECT IDENTIFIER ::= { tn3270Objects 1 }
tn3270Port OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the port for use by the TN3270/TN3270E Server.
Port 23 is the well known Telnet port and if the default."
DEFVAL { 23 }
::= { tn3270Control 1 }
tn3270InactivityTimer OBJECT-TYPE
SYNTAX Integer32 (0..99999999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The inactivity time-out specified in seconds. When a
connection has been inactive for the number of seconds
specified by this object it is closed. The default of
0 means no inactivity time-out."
DEFVAL { 0 }
::= { tn3270Control 2 }
tn3270Timemark OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TIMEMARK processing time-out specified in seconds.
A value of 0 disables this function."
DEFVAL { 600 } -- 10 minutes
::= { tn3270Control 3 }
tn3270ScanInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The scan interval to be used by the Telnet Server.
TIMEMARK processing scans the Telnet sessions every
tn3270ScanInterval period (specified in seconds) for
sessions that have been idle for more than the value
Expires November 1997 [Page 5]~
if tn3270Timemark. Sessions that are idle more than
the value of tn3270Timemark are checked by sending a
Telnet IAC Timemark command.
A value of 0 implies that TIMEMARK processing is
not in effect."
DEFVAL { 120 } -- 2 minutes
::= { tn3270Control 4 }
tn3270BinaryLineMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value of true(1) for this object allows incoming
Telnet line-mode sessions to operate in binary mode."
DEFVAL { false }
::= { tn3270Control 5 }
tn3270DisableSga OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A value of true(1) for this object suppresses the "The type of resource defined by a Resource Pool. Refer
transmission of GO AHEADs by Telnet. This must be to tn3270eResPoolTable."
negotiated by both client and server. Selection of this
option reduces the overhead for a full duplex terminal
and a full duplex connection."
DEFVAL { false }
::= { tn3270Control 6 }
tn3270AdminStatus OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
up(1), other(0),
down(2) lu(1),
printer(2)
} }
MAX-ACCESS read-write
Tn3270Functions ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The desired state of the Telnet Server." "This textual convention is intended to reflect the
::= { tn3270Control 7 } current set of TN3270 and TN3270E functions that can
be negiotiated between a server and its client:
tn3270OperStatus OBJECT-TYPE RFC856
SYNTAX INTEGER { transmitBinary The sender of this command REQUESTS
up(1), permission to begin transmitting, or
down(2) confirms that it will now begin transmitting
characters which are to be interpreted
as 8 bits of binary data by
the receiver of the data.
RFC820
timeMark The sender of this command REQUESTS that
the receiver of this command return a WILL
TIMING-MARK in the data stream at the
'appropriate place' ...
RFC885
endOfRecord The sender of this command requests
permission to begin transmission of the
Telnet END-OF-RECORD (EOR) code when
transmitting data characters, or
the sender of this command confirms it will
now begin transmission of EORs with
transmitted data characters.
RFC1091
terminalType Sender is willing to send terminal type
information in a subsequent sub-negotiation.
RFC1041
tn3270Regime Sender is willing to send list of supported
3270 Regimes in a subsequent sub-negotiation.
RFC1647
scsCtlCodes (Printer sessions only). Allows the use
of the SNA Character Stream (SCS) and SCS
control codes on the session. SCS is
used with LU type 1 SNA sessions.
dataStreamCtl (Printer sessions only). Allows the use
of the standard 3270 data stream. This
corresponds to LU type 3 SNA sessions.
responses Provides support for positive and
negative response handling. Allows the
server to reflect to the client any and
all definite, exception, and no response
requests sent by the host application.
bindImage Allows the server to send the SNA Bind
image and Unbind notification to the
client.
sysreq Allows the client and server to emulate
some (or all, depending on the server) of
the functions of the SYSREQ key in an SNA
environment."
SYNTAX BITS {
transmitBinary(0),-- rfc856
timemark(1), -- rfc860
endOfRecord(2), -- rfc885
terminalType(3), -- rfc1091
tn3270Regime(4), -- rfc1041
scsCtlCodes(5), -- rfc1647
dataStreamCtl(6), -- rfc1647
responses(7), -- rfc1647
bindImage(8), -- rfc1647
sysreq(9) -- rfc1647
} }
Expires November 1997 [Page 6]~ DeviceTypes ::= TEXTUAL-CONVENTION
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the Telnet Server."
::= { tn3270Control 8 }
tn3270DefaultApplName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The default Application to use. Typically this is an "This textual convention defines the list of device types
initial application which is either a network solictor or that can be set as defined by RFC 1647."
front-end menu system. SYNTAX INTEGER { -- terminals
unknown(0),
ibm3278d2(1), -- (24 row x 80 col display)
ibm3278d2E(2), -- (24 row x 80 col display)
ibm3278d3(3), -- (32 row x 80 col display)
ibm3278d3E(4), -- (32 row x 80 col display)
ibm3278d4(5), -- (43 row x 80 col display)
ibm3278d4E(6), -- (43 row x 80 col display)
ibm3278d5(7), -- (27 row x 132 col display)
ibm3278d5E(8), -- (27 row x 132 col display)
ibmDynamic(9), -- (no pre-defined display size)
ibm3287d1(10) -- printers
}
A null length octet string implies no default is in effect." -- Top-level structure of the MIB
DEFVAL { ''H }
::= { tn3270Control 9 }
tn3270DefaultApplIpAddress OBJECT-TYPE tn3270eNotifications OBJECT IDENTIFIER ::= { tn3270eMIB 0 }
SYNTAX IpAddress tn3270eObjects OBJECT IDENTIFIER ::= { tn3270eMIB 1 }
MAX-ACCESS read-write tn3270eConformance OBJECT IDENTIFIER ::= { tn3270eMIB 3 }
STATUS current
DESCRIPTION
"The default Application's IP Address. A value of 0 implies
no IP Address has been set."
DEFVAL { 0 }
::= { tn3270Control 10 }
tn3270DefaultApplIpGroupName OBJECT-TYPE -- MIB Objects
SYNTAX DisplayString (SIZE(0..8)) tn3270eSrvrConfTable OBJECT-TYPE
MAX-ACCESS read-write SYNTAX SEQUENCE OF Tn3270eSrvrConfEntry
MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The IP Group name to be used with the default Application. "This table defines the configuration elements for
A null octet string implies that IP Group name has not TN3270 Servers. The number of entries in this table
been specified." is expected to vary depending on the location of the
DEFVAL { ''H } table. A particular TN3270 Server is expected to
::= { tn3270Control 11 } have a single entry. Modeling of the configuration
elements as a table enable use of the table by
management applications as well as allowing multiple
TN3270 Servers to exist at the same host."
::= { tn3270eObjects 1 }
tn3270DefaultApplIfIndex OBJECT-TYPE tn3270eSrvrConfEntry OBJECT-TYPE
SYNTAX InterfaceIndexOrZero SYNTAX Tn3270eSrvrConfEntry
MAX-ACCESS read-write MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The ifEntry to be used by the default Application. "Definition of the configuration elements for a single
A value of 0 implies that this object has not been set." TN3270 Server."
DEFVAL { 0 } INDEX { tn3270eSrvrConfIpAddr, tn3270eSrvrConfIndex }
::= { tn3270eSrvrConfTable 1 }
Expires November 1997 [Page 7]~ Tn3270eSrvrConfEntry ::= SEQUENCE {
::= { tn3270Control 12 } tn3270eSrvrConfIpAddr IpAddress,
tn3270eSrvrConfIndex Unsigned32,
tn3270eSrvrConfInactivityTimer Unsigned32,
tn3270eSrvrConfActivityCheck INTEGER,
tn3270eSrvrConfActivityTimeout Unsigned32,
tn3270eSrvrConfActivityInterval Unsigned32,
tn3270eSrvrConfProtoSupported Tn3270Functions,
tn3270eSrvrConfAdminStatus INTEGER,
tn3270eSrvrConfOperStatus INTEGER,
tn3270eSrvrConfSessionTermState INTEGER,
tn3270eSrvrConfSrvrType INTEGER,
tn3270eSrvrConfRowStatus RowStatus
}
tn3270TelnetAppl OBJECT-TYPE tn3270eSrvrConfIpAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8)) SYNTAX IpAddress
MAX-ACCESS read-write MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The application to which to connect when a Telnet Client "Indicates the local IP Address associated with a TN3270
establishes a 3270 connection." Server. A value of 0 is allowed when the entry exists
DEFVAL { ''H } at a single TN3270 Server instance host."
::= { tn3270Control 13 } ::= { tn3270eSrvrConfEntry 1 }
tn3270LmApplName OBJECT-TYPE tn3270eSrvrConfIndex OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8)) SYNTAX Unsigned32
MAX-ACCESS read-write MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Application to use when a Telnet Client establishes "Indicates the instance of a TN3270/TN3270E Server that
a line-mode connection. exists at the IP Host pointed to by tn3270eSrvrConfIpAddr."
::= { tn3270eSrvrConfEntry 2 }
A null length octet string implies not set."
DEFVAL { ''H }
::= { tn3270Control 14 }
tn3270LmApplIpAddress OBJECT-TYPE tn3270eSrvrConfInactivityTimer OBJECT-TYPE
SYNTAX IpAddress SYNTAX Unsigned32 (0..99999999)
MAX-ACCESS read-write UNITS "seconds"
MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The line-mode Application's IP Address. A value of 0 implies "The inactivity time-out specified in seconds. When a
no IP Address has been set." connection has been inactive for the number of seconds
specified by this object it is closed. The default of
0 means no inactivity time-out."
DEFVAL { 0 } DEFVAL { 0 }
::= { tn3270Control 15 } ::= { tn3270eSrvrConfEntry 3 }
tn3270LmApplIpGroupName OBJECT-TYPE tn3270eSrvrConfActivityCheck OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8)) SYNTAX INTEGER {
MAX-ACCESS read-write noCheck(0),
timeMark(1),
nop(2)
}
MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The IP Group name to be used with the line-mode Application. "This object is intended to enable either timemark or
A null octet string implies that IP Group name has not nop processing."
been specified." DEFVAL { noCheck }
DEFVAL { ''H } ::= { tn3270eSrvrConfEntry 4 }
::= { tn3270Control 16 }
tn3270LmApplIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
Expires November 1997 [Page 8]~ tn3270eSrvrConfActivityTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The ifEntry to be used by the line-mode Application. "The TIMEMARK or NOP processing time-out specified in seconds."
A value of 0 implies that this object has not been set." DEFVAL { 600 } -- 10 minutes
DEFVAL { 0 } ::= { tn3270eSrvrConfEntry 5 }
::= { tn3270Control 17 } tn3270eSrvrConfActivityInterval OBJECT-TYPE
SYNTAX Unsigned32
tn3270UsstcpTableName OBJECT-TYPE UNITS "seconds"
SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-create
MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The name of USS definition table for message 10. This "The scan interval to be used by the Telnet Server.
applies to 3270 devices only. It allows the mapping of TIMEMARK or NOP processing scans the Telnet sessions
a customized USS message 1- screen to either a remote IP on the interval provided by this object looking for
address or a network interface using transparent-mode sessions that have been idle for more than the value
operation to use as a Telnet logon screen. provided by tn3270eSrvrConfActivityTimeout."
DEFVAL { 120 } -- 2 minutes
A null length octet string implies not set." ::= { tn3270eSrvrConfEntry 6 }
DEFVAL { ''H }
::= { tn3270Control 18 }
tn3270UsstcpIpAddress OBJECT-TYPE tn3270eSrvrConfProtoSupported OBJECT-TYPE
SYNTAX IpAddress SYNTAX Tn3270Functions
MAX-ACCESS read-write MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The USSTCP function's IP Address. A value of 0 implies "This object indicates the TN3270 functions supported by a
no IP Address has been set." TN3270 Server."
DEFVAL { 0 } DEFVAL { { scsCtlCodes, dataStreamCtl,
::= { tn3270Control 19 } responses, bindImage, sysreq } }
::= { tn3270eSrvrConfEntry 7 }
tn3270UsstcpIpGroupName OBJECT-TYPE tn3270eSrvrConfAdminStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8)) SYNTAX INTEGER {
MAX-ACCESS read-write up(1),
down(2),
stopImmediate(3)
}
MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The IP Group name to be used with USSTCP processing. "The desired state of the Telnet Server. The stopImmediate
A null octet string implies that IP Group name has not state is intended to enable Servers to gracefully terminate
been specified." via down or to terminate immediate without ending its
DEFVAL { ''H } client connections. There is no requirement for support
::= { tn3270Control 20 } of stopImmediate."
::= { tn3270eSrvrConfEntry 8 }
tn3270UsstcpIfIndex OBJECT-TYPE tn3270eSrvrConfOperStatus OBJECT-TYPE
SYNTAX InterfaceIndexOrZero SYNTAX INTEGER {
MAX-ACCESS read-write up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The current operational state of the Telnet Server."
::= { tn3270eSrvrConfEntry 9 }
Expires November 1997 [Page 9]~ tn3270eSrvrConfSessionTermState OBJECT-TYPE
"The ifEntry to be used by USSTCP processing.
A value of 0 implies that this object has not been set."
DEFVAL { 0 }
::= { tn3270Control 21 }
tn3270SessionTermState OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
terminate(1), terminate(1),
luSessionPend(2), luSessionPend(2),
queueSession(3) queueSession(3)
} }
MAX-ACCESS read-write MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The current state for determining what happens when "The current state for determining what happens when
Telnet connection terminates: Telnet connection terminates:
terminate(1) => Terminate connection. terminate(1) => Terminate connection.
luSessionPend(2) => Allows the client's session to revert luSessionPend(2) => Allows the client's session to revert
to their Default Application upon to their Default Application upon
termination of their Telnet connection. termination of their Telnet connection.
queueSession(3) => ????" queueSession(3) => ????"
DEFVAL { terminate } DEFVAL { terminate }
::= { tn3270Control 22 } ::= { tn3270eSrvrConfEntry 10 }
tn3270Msg07Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object determines what happens when a
Telnet connection is trying to establish the connection
but goes down due to an error. Setting this object to
true(1) causes a USSMSG 7 (or other error type USSMSG) to
be displayed. The default is, false(2), to break the connection
without any indication of what the error was."
DEFVAL { false }
::= { tn3270Control 23 }
tn3270OldSolicitorEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object determines where the cursor is placed
on the Telnet solicitor screen. Setting this object to true(1)
causes the cursor to be placed on the userid entry of the
solicitor screen for the first display only. The default
Expires November 1997 [Page 10]~
(false(2) is to put the cursor on the application entry of the
solicitor screen."
DEFVAL { false }
::= { tn3270Control 24 }
-- The ALLOWAPPL Table definitions
tn3270AllowApplTable OBJECT-TYPE
SYNTAX SEQUENCE OF Tn3270AllowApplEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Applications that the Telnet Server can access."
::= { tn3270Objects 2 }
tn3270AllowApplEntry OBJECT-TYPE
SYNTAX Tn3270AllowApplEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single Application that the Telnet
Server can access.
An Application can be qualified with a list of LUs by
adding entries to the tn3270AllowApplLuTable. The
tn3270AllowApplLuTable is indexed by tn3270AllowApplName
and tn3270AllowApplLuName."
INDEX { tn3270AllowApplName }
::= { tn3270AllowApplTable 1 }
Tn3270AllowApplEntry ::= SEQUENCE {
tn3270AllowApplName VariableName,
tn3270AllowApplDisconnect TruthValue,
tn3270AllowApplRowStatus RowStatus }
tn3270AllowApplName OBJECT-TYPE
SYNTAX VariableName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the application that can be accessed."
::= { tn3270AllowApplEntry 1 }
tn3270AllowApplDisconnect OBJECT-TYPE tn3270eSrvrConfSrvrType OBJECT-TYPE
SYNTAX TruthValue SYNTAX INTEGER {
MAX-ACCESS read-create unknown(0),
host(1),
gateway(2)
}
MAX-ACCESS read-only
STATUS current STATUS current
Expires November 1997 [Page 11]~
DESCRIPTION DESCRIPTION
"When set to true this allows the application to be "This object indicates the type of TN3270/TN3270E Server.
notified to disconnect rather than log off a user when The existence of MIB tables and objects that will be
the session is dropped." defined by follow-on MIBs may be predicated on whether the
DEFVAL { false } TN3270/TN3270E Server is local to the same host as the
::= { tn3270AllowApplEntry 2 } secondary LU used to attach the IP client into a SNA
network."
::= { tn3270eSrvrConfEntry 11 }
tn3270AllowApplRowStatus OBJECT-TYPE tn3270eSrvrConfRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object allows entries to be created and deleted in the "This object allows entries to be created and deleted in the
tn3270AllowApplTable. tn3270eSrvrConfTable. Creating an entry in this table
at a management application informs enable that application
to manage the associating TN3270 Server. Deleting an entry
removes it from that application's management domain.
When an entry in the tn3270AllowApplTable is deleted A server based implementation of this table may chose to
deleted (by setting this object to destroy(6)), this has not support creation or deletion of its (probably only)
the side-effect of removing all entries from the entry in this table via this object.
tn3270AllowApplLuTable that are associated with the
entry being deleted." An entry in this table is deleted by setting this object
to destroy(6)."
REFERENCE REFERENCE
"RFC 1903, 'Textual Conventions for version 2 of the Simple "RFC 1903, 'Textual Conventions for version 2 of the Simple
Network Management Protocol (SNMPv2).'" Network Management Protocol (SNMPv2).'"
::= { tn3270AllowApplEntry 3 } ::= { tn3270eSrvrConfEntry 12 }
tn3270AllowApplLuTable OBJECT-TYPE tn3270eSrvrPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Tn3270AllowApplLuEntry SYNTAX SEQUENCE OF Tn3270eSrvrPortEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The LUs associated with a tn3270AllowApplEntry. "This table defines the ports associated with TN3270/
Use of this table is optional. The preferred method of TN3270E Servers."
associating LUs to Applications is via the ::= { tn3270eObjects 2 }
tn3270LuMapTable."
::= { tn3270Objects 3 }
tn3270AllowApplLuEntry OBJECT-TYPE tn3270eSrvrPortEntry OBJECT-TYPE
SYNTAX Tn3270AllowApplLuEntry SYNTAX Tn3270eSrvrPortEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Definition of a single LU associated with a "Definition of a single server port assignment."
tn3270AllowApplEntry." INDEX { tn3270eSrvrConfIpAddr, tn3270eSrvrConfIndex,
INDEX { tn3270AllowApplName, tn3270AllowApplLuName } tn3270eSrvrPort }
::= { tn3270AllowApplLuTable 1 } ::= { tn3270eSrvrPortTable 1 }
Tn3270AllowApplLuEntry ::= SEQUENCE {
tn3270AllowApplLuName DisplayString,
Expires November 1997 [Page 12]~ Tn3270eSrvrPortEntry ::= SEQUENCE {
tn3270AllowApplLuRowStatus RowStatus } tn3270eSrvrPort Unsigned32,
tn3270eSrvrPortRowStatus RowStatus
}
tn3270AllowApplLuName OBJECT-TYPE tn3270eSrvrPort OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..8)) SYNTAX Unsigned32 (0..65535)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The name of a LU associated with an Application." "Indicates a port assigned to a server."
::= { tn3270AllowApplLuEntry 1 } ::= { tn3270eSrvrPortEntry 1 }
tn3270AllowApplLuRowStatus OBJECT-TYPE tn3270eSrvrPortRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object allows entries to be created and deleted in the "This object allows entries to be created and deleted in the
tn3270AllowApplLuTable. tn3270eSrvrPortTable.
When an entry in the tn3270AllowApplTable is deleted An entry in this table is deleted by setting this object
deleted (by setting this object to destroy(6)) it has no to destroy(6)."
effect on the associating tn3270AllowApplEntry."
REFERENCE REFERENCE
"RFC 1903, 'Textual Conventions for version 2 of the Simple "RFC 1903, 'Textual Conventions for version 2 of the Simple
Network Management Protocol (SNMPv2).'" Network Management Protocol (SNMPv2).'"
::= { tn3270AllowApplLuEntry 2 } ::= { tn3270eSrvrPortEntry 2 }
-- The RESTRICTAPPL Table definitions
tn3270RestrictApplTable OBJECT-TYPE tn3270eSrvrStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Tn3270RestrictApplEntry SYNTAX SEQUENCE OF Tn3270eSrvrStatsEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Applications that the Telnet Server provides "This table defines a set of statistics concerning
restricted access." global TN3270 Server performance."
::= { tn3270Objects 4 } ::= { tn3270eObjects 3 }
tn3270RestrictApplEntry OBJECT-TYPE tn3270eSrvrStatsEntry OBJECT-TYPE
SYNTAX Tn3270RestrictApplEntry SYNTAX Tn3270eSrvrStatsEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Definition of a single restricted Application that the Telnet "Collection of a set of statistic objects for a single
Server can access. TN3270 Server."
INDEX { tn3270eSrvrConfIpAddr, tn3270eSrvrConfIndex }
An Application is qualified with a list of users that are ::= { tn3270eSrvrStatsTable 1 }
allowed access to the application via the
tn3270RestrictApplUserTable."
Expires November 1997 [Page 13]~
INDEX { tn3270RestrictApplName }
::= { tn3270RestrictApplTable 1 }
Tn3270RestrictApplEntry ::= SEQUENCE {
tn3270RestrictApplName VariableName,
tn3270RestrictApplDisconnect TruthValue,
tn3270RestrictApplRowStatus RowStatus }
tn3270RestrictApplName OBJECT-TYPE Tn3270eSrvrStatsEntry ::= SEQUENCE {
SYNTAX VariableName tn3270eSrvrStatsUpTime TimeTicks,
MAX-ACCESS not-accessible tn3270eSrvrStatsMaxLus Integer32,
STATUS current tn3270eSrvrStatsLusInUse Integer32,
DESCRIPTION tn3270eSrvrStatsSpareLus Integer32,
"The name of the application that can be accessed." tn3270eSrvrStatsMaxPtrs Integer32,
::= { tn3270RestrictApplEntry 1 } tn3270eSrvrStatsPtrsInUse Integer32,
tn3270eSrvrStatsSparePtrs Integer32,
tn3270eSrvrStatsConnectsIn Counter32,
tn3270eSrvrStatsConnRejects Counter32,
tn3270eSrvrStatsDisconnects Counter32
}
tn3270RestrictApplDisconnect OBJECT-TYPE tn3270eSrvrStatsUpTime OBJECT-TYPE
SYNTAX TruthValue SYNTAX TimeTicks
MAX-ACCESS read-create MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"When set to true this allows the application to be "Indicates the amount of time that a particular TN3270
notified to disconnect rather than log off a user when has be active. This is total time since the server was
the session is dropped." started and is not reset on tn3270eSrvrConfOperStatus."
DEFVAL { false } ::= { tn3270eSrvrStatsEntry 1 }
::= { tn3270RestrictApplEntry 2 }
tn3270RestrictApplRowStatus OBJECT-TYPE tn3270eSrvrStatsMaxLus OBJECT-TYPE
SYNTAX RowStatus SYNTAX Integer32
MAX-ACCESS read-create MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object allows entries to be created and deleted in the "Indicates the maximum number of LUs for use by a
tn3270RestrictApplTable. TN3270 Server."
::= { tn3270eSrvrStatsEntry 2 }
When an entry in the tn3270RestrictApplTable is deleted
deleted (by setting this object to destroy(6)), this has
the side-effect of removing all entries from the
tn3270RestrictApplUserTable that are associated with the
entry being deleted."
REFERENCE
"RFC 1903, 'Textual Conventions for version 2 of the Simple
Network Management Protocol (SNMPv2).'"
::= { tn3270RestrictApplEntry 3 }
tn3270RestrictApplUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF Tn3270RestrictApplUserEntry
MAX-ACCESS not-accessible
Expires November 1997 [Page 14]~ tn3270eSrvrStatsLusInUse OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Users associated with a tn3270RestrictApplEntry." "Indicates the current number of LUs in use by a
::= { tn3270Objects 5 } TN3270 Server."
::= { tn3270eSrvrStatsEntry 3 }
tn3270RestrictApplUserEntry OBJECT-TYPE tn3270eSrvrStatsSpareLus OBJECT-TYPE
SYNTAX Tn3270RestrictApplUserEntry SYNTAX Integer32
MAX-ACCESS not-accessible MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Definition of a single User associated with a "Indicates the number of free LUs for a particular TN3270
tn3270RestrictApplEntry." Server."
INDEX { tn3270RestrictApplName, tn3270RestrictApplUserName } ::= { tn3270eSrvrStatsEntry 4 }
::= { tn3270RestrictApplUserTable 1 }
Tn3270RestrictApplUserEntry ::= SEQUENCE {
tn3270RestrictApplUserName DisplayString,
tn3270RestrictApplUserRowStatus RowStatus }
tn3270RestrictApplUserName OBJECT-TYPE tn3270eSrvrStatsMaxPtrs OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..8)) SYNTAX Integer32
MAX-ACCESS not-accessible MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The name of a User allowed access with the corresponding "Indicates the maximum number of Printer Resources for use by a
Application." TN3270 Server."
::= { tn3270RestrictApplUserEntry 1 } ::= { tn3270eSrvrStatsEntry 5 }
tn3270RestrictApplUserRowStatus OBJECT-TYPE tn3270eSrvrStatsPtrsInUse OBJECT-TYPE
SYNTAX RowStatus SYNTAX Integer32
MAX-ACCESS read-create MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object allows entries to be created and deleted in the "Indicates the current number of Printer Resources in use by a
tn3270RestrictApplUserTable. TN3270 Server."
::= { tn3270eSrvrStatsEntry 6 }
When an entry in the tn3270RestrictApplTable is deleted
deleted (by setting this object to destroy(6)) it has no
effect on the associating tn3270RestrictApplEntry.
However, corresponding tn3270RestrictApplULuTable entries
are deleted."
REFERENCE
"RFC 1903, 'Textual Conventions for version 2 of the Simple
Network Management Protocol (SNMPv2).'"
::= { tn3270RestrictApplUserEntry 2 }
tn3270RestrictApplULuTable OBJECT-TYPE
SYNTAX SEQUENCE OF Tn3270RestrictApplULuEntry
Expires November 1997 [Page 15]~ tn3270eSrvrStatsSparePtrs OBJECT-TYPE
MAX-ACCESS not-accessible SYNTAX Integer32
MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The LUs associated with a Restricted Application User. "Indicates the number of free Printer Resources for a
Use of this table is optional. The preferred method of particular TN3270 Server."
associating LUs with Applications is via the ::= { tn3270eSrvrStatsEntry 7 }
tn3270LuMapTable."
::= { tn3270Objects 6 }
tn3270RestrictApplULuEntry OBJECT-TYPE tn3270eSrvrStatsConnectsIn OBJECT-TYPE
SYNTAX Tn3270RestrictApplULuEntry SYNTAX Counter32
MAX-ACCESS not-accessible MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Definition of a single LU associated with a "Indicates the number of client connections received by a
tn3270RestrictApplLuEntry." TN3270 Server."
INDEX { tn3270RestrictApplName, tn3270RestrictApplUserName, ::= { tn3270eSrvrStatsEntry 8 }
tn3270RestrictApplULuName }
::= { tn3270RestrictApplULuTable 1 }
Tn3270RestrictApplULuEntry ::= SEQUENCE {
tn3270RestrictApplULuName DisplayString,
tn3270RestrictApplULuRowStatus RowStatus }
tn3270RestrictApplULuName OBJECT-TYPE tn3270eSrvrStatsConnRejects OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..8)) SYNTAX Counter32
MAX-ACCESS not-accessible MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The name of an LU." "Indicates the number of client connections rejected during
::= { tn3270RestrictApplULuEntry 1 } connection setup."
::= { tn3270eSrvrStatsEntry 9 }
tn3270RestrictApplULuRowStatus OBJECT-TYPE tn3270eSrvrStatsDisconnects OBJECT-TYPE
SYNTAX RowStatus SYNTAX Counter32
MAX-ACCESS read-create MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object allows entries to be created and deleted in the "Indicates the number of client connections disconnected by a
tn3270RestrictApplULuTable. TN3270 Server."
::= { tn3270eSrvrStatsEntry 10 }
When an entry in the tn3270RestrictApplULuTable is deleted
deleted (by setting this object to destroy(6)) it has no
effect on the associating tn3270RestrictApplUserEntry."
REFERENCE
"RFC 1903, 'Textual Conventions for version 2 of the Simple
Network Management Protocol (SNMPv2).'"
::= { tn3270RestrictApplULuEntry 2 }
Expires November 1997 [Page 16]~ tn3270eIpGroupTable OBJECT-TYPE
tn3270IpGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF Tn3270eIpGroupEntry
SYNTAX SEQUENCE OF Tn3270IpGroupEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table defines IP Address grouping for use by the "This table defines IP Address groupings for use by the
Telnet Server." Telnet Server."
::= { tn3270Objects 7 } ::= { tn3270eObjects 4 }
tn3270IpGroupEntry OBJECT-TYPE tn3270eIpGroupEntry OBJECT-TYPE
SYNTAX Tn3270IpGroupEntry SYNTAX Tn3270eIpGroupEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Definition of a single IP Address entry. All entries with "Definition of a single IP Address entry. All entries with
the same 1st index, tn3270IpGroupName are considered to the same 1st index, tn3270eIpGroupName are considered to
be in the same IP Group." be in the same IP Group."
INDEX { tn3270IpGroupName, tn3270IpGroupIpAddress } INDEX { tn3270eSrvrConfIpAddr, tn3270eSrvrConfIndex,
::= { tn3270IpGroupTable 1 } tn3270eIpGroupName, tn3270eIpGroupIpAddress }
::= { tn3270eIpGroupTable 1 }
Tn3270IpGroupEntry ::= SEQUENCE { Tn3270eIpGroupEntry ::= SEQUENCE {
tn3270IpGroupName DisplayString, tn3270eIpGroupName DisplayString,
tn3270IpGroupIpAddress IpAddress, tn3270eIpGroupIpAddress IpAddress,
tn3270IpGroupSubnetMask IpAddress, tn3270eIpGroupSubnetMask IpAddress,
tn3270IpGroupIpSubnet IpAddress, tn3270eIpGroupRowStatus RowStatus }
tn3270IpGroupRowStatus RowStatus }
tn3270IpGroupName OBJECT-TYPE tn3270eIpGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..8)) SYNTAX DisplayString (SIZE(1..8))
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The name of a IP Group." "The name of a IP Group."
::= { tn3270IpGroupEntry 1 } ::= { tn3270eIpGroupEntry 1 }
tn3270IpGroupIpAddress OBJECT-TYPE tn3270eIpGroupIpAddress OBJECT-TYPE
SYNTAX IpAddress SYNTAX IpAddress
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The IP Address of a member of a IP Group." "The IP Address of a member of a IP Group."
::= { tn3270IpGroupEntry 2 } ::= { tn3270eIpGroupEntry 2 }
tn3270IpGroupSubnetMask OBJECT-TYPE tn3270eIpGroupSubnetMask OBJECT-TYPE
SYNTAX IpAddress SYNTAX IpAddress
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Expires November 1997 [Page 17]~
"The corresponding subnet mask associated with "The corresponding subnet mask associated with
tn3270IpGroupIpSubnet." tn3270eIpGroupIpAddress. A single IP Address
::= { tn3270IpGroupEntry 3 } is represented by having this object contain
the value of 255.255.255.255."
tn3270IpGroupIpSubnet OBJECT-TYPE ::= { tn3270eIpGroupEntry 3 }
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP Subnet to be used with the objects
tn3270IpGroupIpAddress and tn3270IpGroupSubnetMask."
::= { tn3270IpGroupEntry 4 }
tn3270IpGroupRowStatus OBJECT-TYPE tn3270eIpGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object allows entries to be created and deleted in the "This object allows entries to be created and deleted in the
tn3270IpGroupTable. tn3270eIpGroupTable.
An entry in this table is deleted by setting this object An entry in this table is deleted by setting this object
to destroy(6)." to destroy(6)."
REFERENCE REFERENCE
"RFC 1903, 'Textual Conventions for version 2 of the Simple "RFC 1903, 'Textual Conventions for version 2 of the Simple
Network Management Protocol (SNMPv2).'" Network Management Protocol (SNMPv2).'"
::= { tn3270IpGroupEntry 5 } ::= { tn3270eIpGroupEntry 4 }
tn3270LuGroupTable OBJECT-TYPE tn3270eResPoolTable OBJECT-TYPE
SYNTAX SEQUENCE OF Tn3270LuGroupEntry SYNTAX SEQUENCE OF Tn3270eResPoolEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table defines LU groups for use by the "This table defines Resource groupings and using the term
Telnet Server." pool as defined by RFC 1647."
::= { tn3270Objects 8 } ::= { tn3270eObjects 5 }
tn3270LuGroupEntry OBJECT-TYPE tn3270eResPoolEntry OBJECT-TYPE
SYNTAX Tn3270LuGroupEntry SYNTAX Tn3270eResPoolEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Definition of a single LU Group member. All entries with "Definition of a single Resource Pool member. All entries with
the same 1st index, tn3270LuGroupName are considered to the same 1st index, tn3270eResPoolName are considered to
be in the same LU Group. be in the same Pool."
INDEX { tn3270eSrvrConfIpAddr, tn3270eSrvrConfIndex,
The first entry in this table is used for defining the tn3270eResPoolName, tn3270eResPoolElementName }
default LU Group. By convention tn3270LuGroupName should ::= { tn3270eResPoolTable 1 }
Expires November 1997 [Page 18]~
be set to 8 blanks to represent this entry."
INDEX { tn3270LuGroupName, tn3270LuGroupLuName }
::= { tn3270LuGroupTable 1 }
Tn3270LuGroupEntry ::= SEQUENCE { Tn3270eResPoolEntry ::= SEQUENCE {
tn3270LuGroupName DisplayString, tn3270eResPoolName DisplayString,
tn3270LuGroupLuName DisplayString, tn3270eResPoolElementName DisplayString,
tn3270LuGroupRowStatus RowStatus } tn3270eResPoolIpGroupName DisplayString,
tn3270eResPoolElementType ResourceType,
tn3270eResPoolClientPort Unsigned32,
tn3270eResPoolRowStatus RowStatus }
tn3270LuGroupName OBJECT-TYPE tn3270eResPoolName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..8)) SYNTAX DisplayString (SIZE(1..255))
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The name of a LU Group." "The name of a Resource Pool.."
::= { tn3270LuGroupEntry 1 } ::= { tn3270eResPoolEntry 1 }
tn3270LuGroupLuName OBJECT-TYPE tn3270eResPoolElementName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..8)) SYNTAX DisplayString (SIZE(1..8))
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The LU Name of a member of a Lu Group." "The Name of a member of a Resource Pool."
::= { tn3270LuGroupEntry 2 } ::= { tn3270eResPoolEntry 2 }
tn3270LuGroupRowStatus OBJECT-TYPE tn3270eResPoolIpGroupName OBJECT-TYPE
SYNTAX RowStatus SYNTAX DisplayString (SIZE(1..8))
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object allows entries to be created and deleted in the "The name of a IP Group to map a Resource Element to."
tn3270LuGroupTable. ::= { tn3270eResPoolEntry 3 }
An entry in this table is deleted by setting this object
to destroy(6)."
REFERENCE
"RFC 1903, 'Textual Conventions for version 2 of the Simple
Network Management Protocol (SNMPv2).'"
::= { tn3270LuGroupEntry 3 }
tn3270PrtGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF Tn3270PrtGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines Printer groups for use by the
Telnet Server."
::= { tn3270Objects 9 }
Expires November 1997 [Page 19]~
tn3270PrtGroupEntry OBJECT-TYPE
SYNTAX Tn3270PrtGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Definition of a single Printer Group member. All entries with
the same 1st index, tn3270PrtGroupName are considered to
be in the same Printer Group."
INDEX { tn3270PrtGroupName, tn3270PrtGroupPrtName }
::= { tn3270PrtGroupTable 1 }
Tn3270PrtGroupEntry ::= SEQUENCE {
tn3270PrtGroupName DisplayString,
tn3270PrtGroupPrtName DisplayString,
tn3270PrtGroupRowStatus RowStatus }
tn3270PrtGroupName OBJECT-TYPE tn3270eResPoolElementType OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..8)) SYNTAX ResourceType
MAX-ACCESS not-accessible MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The name of a Printer Group." "The type of the entity in a Resource Pool."
::= { tn3270PrtGroupEntry 1 } ::= { tn3270eResPoolEntry 4 }
tn3270PrtGroupPrtName OBJECT-TYPE tn3270eResPoolClientPort OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..8)) SYNTAX Unsigned32 (0..65535)
MAX-ACCESS not-accessible MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Printer Name of a member of a Printer Group." "If specified this a pool to a specific client
::= { tn3270PrtGroupEntry 2 } port."
::= { tn3270eResPoolEntry 5 }
tn3270PrtGroupRowStatus OBJECT-TYPE tn3270eResPoolRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object allows entries to be created and deleted in the "This object allows entries to be created and deleted in the
tn3270PrtGroupTable. tn3270eResPoolTable.
An entry in this table is deleted by setting this object An entry in this table is deleted by setting this object
to destroy(6)." to destroy(6)."
REFERENCE REFERENCE
"RFC 1903, 'Textual Conventions for version 2 of the Simple "RFC 1903, 'Textual Conventions for version 2 of the Simple
Network Management Protocol (SNMPv2).'" Network Management Protocol (SNMPv2).'"
::= { tn3270PrtGroupEntry 3 } ::= { tn3270eResPoolEntry 6 }
tn3270LuMapTable OBJECT-TYPE
Expires November 1997 [Page 20]~ tn3270eResMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF Tn3270LuMapEntry SYNTAX SEQUENCE OF Tn3270eResMapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table defines LU to IP mappings. An IP Address or "This table defines Resource Element to IP Address mappings."
IP Address group can only be assigned to a LU or LU ::= { tn3270eObjects 6 }
Group once."
::= { tn3270Objects 10 }
tn3270LuMapEntry OBJECT-TYPE tn3270eResMapEntry OBJECT-TYPE
SYNTAX Tn3270LuMapEntry SYNTAX Tn3270eResMapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Definition of the mapping of a single IP Address or IP "Definition of the mapping of a Resource Element to
Address Group to either a LU or LU Group." a IP Address."
INDEX { tn3270LuMapLuName } INDEX { tn3270eSrvrConfIpAddr, tn3270eSrvrConfIndex,
::= { tn3270LuMapTable 1 } tn3270eResMapClientPort, tn3270eResMapElementName }
::= { tn3270eResMapTable 1 }
Tn3270LuMapEntry ::= SEQUENCE { Tn3270eResMapEntry ::= SEQUENCE {
tn3270LuMapLuName DisplayString, tn3270eResMapClientPort Unsigned32,
tn3270LuMapIpAddr IpAddress, tn3270eResMapElementName DisplayString,
tn3270LuMapIpGroupName DisplayString, tn3270eResMapIpAddress IpAddress,
tn3270LuMapRowStatus RowStatus } tn3270eResMapSubnetMask IpAddress,
tn3270eResMapElementType ResourceType,
tn3270eResMapRowStatus RowStatus }
tn3270LuMapLuName OBJECT-TYPE tn3270eResMapClientPort OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..8)) SYNTAX Unsigned32 (0..65535)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The name of either a LU or LU Group Name." "The port that this assignment is restricted to. Note that
::= { tn3270LuMapEntry 1 } a value of 0 for this object implies that the assignment
is global to all client ports."
::= { tn3270eResMapEntry 1 }
tn3270LuMapIpAddr OBJECT-TYPE tn3270eResMapElementName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Name of a resource element."
::= { tn3270eResMapEntry 2 }
tn3270eResMapIpAddress OBJECT-TYPE
SYNTAX IpAddress SYNTAX IpAddress
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The IP address to map to a LU. If this object is non-zero "A client IP Address or subnet if tn3270eResMapSubnetMask
then tn3270LuMapLuName MUST be a single LU Name and is set to 255.255.255.255."
tn3270LuMapIpGroupName MUST be a null octet string." ::= { tn3270eResMapEntry 3 }
DEFVAL { 0 }
::= { tn3270LuMapEntry 2 }
tn3270LuMapIpGroupName OBJECT-TYPE tn3270eResMapSubnetMask OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8)) SYNTAX IpAddress
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION
"The corresponding subnet mask associated with
tn3270eResMapIpAddress. A single IP Address
is represented by having this object contain
the value of 255.255.255.255."
::= { tn3270eResMapEntry 4 }
Expires November 1997 [Page 21]~ tn3270eResMapElementType OBJECT-TYPE
SYNTAX ResourceType
MAX-ACCESS read-create
STATUS current
DESCRIPTION DESCRIPTION
"The IP addresses to map to a LU Group. If this object is "The type of the entity in a Resource Pool."
not a null octet string then tn3270LuMapLuName MUST be a ::= { tn3270eResMapEntry 5 }
LU Group name and tn3270LuMapIpAddr MUST be zero."
DEFVAL { ''H }
::= { tn3270LuMapEntry 3 }
tn3270LuMapRowStatus OBJECT-TYPE tn3270eResMapRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object allows entries to be created and deleted in the "This object allows entries to be created and deleted in the
tn3270LuMapTable. tn3270eResMapTable.
An entry in this table is deleted by setting this object Entries in this table should occur automatically when an
to destroy(6)." entry is created in the tn3270eResPoolTable. Deleting an
entry in the tn3270eResPoolTable should remove all
corresponding entries in this table.
The tn3270eResPoolTable is optional. This implies that entries
can be added directly to this table."
REFERENCE REFERENCE
"RFC 1903, 'Textual Conventions for version 2 of the Simple "RFC 1903, 'Textual Conventions for version 2 of the Simple
Network Management Protocol (SNMPv2).'" Network Management Protocol (SNMPv2).'"
::= { tn3270LuMapEntry 4 } ::= { tn3270eResMapEntry 6 }
tn3270eIpMapTable OBJECT-TYPE
tn3270PrtMapTable OBJECT-TYPE SYNTAX SEQUENCE OF Tn3270eIpMapEntry
SYNTAX SEQUENCE OF Tn3270PrtMapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table defines Printer to IP mappings. An IP Address or "This table defines IP Address to Resource Element mappings."
IP Address group can only be assigned to a single Printer or ::= { tn3270eObjects 7 }
Printer Group once."
::= { tn3270Objects 11 }
tn3270PrtMapEntry OBJECT-TYPE tn3270eIpMapEntry OBJECT-TYPE
SYNTAX Tn3270PrtMapEntry SYNTAX Tn3270eIpMapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Definition of the mapping of a single IP Address or IP "Definition of the mapping of a IP
Address Group to either a Printer or Printer Group." Address or Group to a Resource Element."
INDEX { tn3270PrtMapPrtName } INDEX { tn3270eSrvrConfIpAddr, tn3270eSrvrConfIndex,
::= { tn3270PrtMapTable 1 } tn3270eIpMapIpAddress, tn3270eIpMapSubnetMask,
tn3270eIpMapClientPort }
::= { tn3270eIpMapTable 1 }
Tn3270PrtMapEntry ::= SEQUENCE { Tn3270eIpMapEntry ::= SEQUENCE {
tn3270PrtMapPrtName DisplayString, tn3270eIpMapIpAddress IpAddress,
tn3270PrtMapIpAddr IpAddress, tn3270eIpMapSubnetMask IpAddress,
tn3270PrtMapIpGroupName DisplayString, tn3270eIpMapClientPort Unsigned32,
tn3270PrtMapRowStatus RowStatus } tn3270eIpMapResElementName DisplayString,
tn3270eIpMapElementType ResourceType,
tn3270eIpMapRowStatus RowStatus }
Expires November 1997 [Page 22]~ tn3270eIpMapIpAddress OBJECT-TYPE
tn3270PrtMapPrtName OBJECT-TYPE SYNTAX IpAddress
SYNTAX DisplayString (SIZE(1..8))
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The name of either a Printer or Printer Group Name." "The IP Address of a member of a IP Group."
::= { tn3270PrtMapEntry 1 } ::= { tn3270eIpMapEntry 1 }
tn3270PrtMapIpAddr OBJECT-TYPE tn3270eIpMapSubnetMask OBJECT-TYPE
SYNTAX IpAddress SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address to map to a Printer. If this object is non-
zero
then tn3270PrtMapPrtName MUST be a single Printer and
tn3270PrtMapIpGroupName MUST be a null octet string."
DEFVAL { 0 }
::= { tn3270PrtMapEntry 2 }
tn3270PrtMapIpGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP addresses to map to a Printer Group. If this object is
not a null octet string then tn3270PrtMapPrtName MUST be a
Printer Group name and tn3270PrtMapIpAddr MUST be zero."
DEFVAL { ''H }
::= { tn3270PrtMapEntry 3 }
tn3270PrtMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows entries to be created and deleted in the
tn3270PrtMapTable.
An entry in this table is deleted by setting this object
to destroy(6)."
REFERENCE
"RFC 1903, 'Textual Conventions for version 2 of the Simple
Network Management Protocol (SNMPv2).'"
::= { tn3270PrtMapEntry 4 }
tn3270LogmodeTable OBJECT-TYPE
SYNTAX SEQUENCE OF Tn3270LogmodeEntry
Expires November 1997 [Page 23]~
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table defines the logmode to be used for a particular "The corresponding subnet mask associated with
interface entry." tn3270eIpGroupIpAddress. A single IP Address
::= { tn3270Objects 12 } is represented by having this object contain
the value of 255.255.255.255."
::= { tn3270eIpMapEntry 2 }
tn3270LogmodeEntry OBJECT-TYPE tn3270eIpMapClientPort OBJECT-TYPE
SYNTAX Tn3270LogmodeEntry SYNTAX Unsigned32 (0..65535)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Definition of the logmode setting for a single interface "The port that this assignment is restricted to. Note that
entry." a value of 0 for this object implies that the assignment
INDEX { tn3270LogmodeIfIndex } is global to all client ports."
::= { tn3270LogmodeTable 1 } ::= { tn3270eIpMapEntry 3 }
Tn3270LogmodeEntry ::= SEQUENCE {
tn3270LogmodeIfIndex InterfaceIndex,
tn3270LogmodeName DisplayString,
tn3270LogmodeRowStatus RowStatus }
tn3270LogmodeIfIndex OBJECT-TYPE tn3270eIpMapResElementName OBJECT-TYPE
SYNTAX InterfaceIndex SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS not-accessible MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The ifIndex of a interface entry to associate a logmode "The Resource Element mapping to IP Address(es)."
with." ::= { tn3270eIpMapEntry 4 }
::= { tn3270LogmodeEntry 1 }
tn3270LogmodeName OBJECT-TYPE tn3270eIpMapElementType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8)) SYNTAX ResourceType
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Logmode name to use for this particular interface. A "The type resource element."
value of a null octet string implies that the default ::= { tn3270eIpMapEntry 5 }
logmode, which is dependent on the interface's type, should
be used."
DEFVAL { ''H }
::= { tn3270LogmodeEntry 2 }
tn3270LogmodeRowStatus OBJECT-TYPE tn3270eIpMapRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Expires November 1997 [Page 24]~
"This object allows entries to be created and deleted in the "This object allows entries to be created and deleted in the
tn3270LogmodeTable. tn3270eIpMapMapTable.
An entry in this table is deleted by setting this object Entries in this table should occur automatically when an
to destroy(6)." entry is created in the tn3270eResPoolTable. Deleting an
entry in the tn3270eResPoolTable should remove all
corresponding entries in this table.
The tn3270eResPoolTable is optional. This implies that entries
can be added directly to this table."
REFERENCE REFERENCE
"RFC 1903, 'Textual Conventions for version 2 of the Simple "RFC 1903, 'Textual Conventions for version 2 of the Simple
Network Management Protocol (SNMPv2).'" Network Management Protocol (SNMPv2).'"
::= { tn3270LogmodeEntry 3 } ::= { tn3270eIpMapEntry 6 }
-- Define the set of objects to augment the Tcp Connection Table with. -- Define the set of objects to add to the Tcp Connection Table
tn3270TcpConnTable OBJECT-TYPE tn3270eTcpConnTable OBJECT-TYPE
SYNTAX SEQUENCE OF Tn3270TcpConnEntry SYNTAX SEQUENCE OF Tn3270eTcpConnEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Extends tcpConnTable to support TN3270 and TN3270E "Extends tcpConnTable to support TN3270 and TN3270E
performance monitoring." performance monitoring."
::= { tn3270Objects 13 } ::= { tn3270eObjects 8 }
tn3270TcpConnEntry OBJECT-TYPE tn3270eTcpConnEntry OBJECT-TYPE
SYNTAX Tn3270TcpConnEntry SYNTAX Tn3270eTcpConnEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Descibes a particular tcp connection entry." "Provides in formation about a single TN3270/TN3270E
AUGMENTS { tcpConnEntry } session."
::= { tn3270TcpConnTable 1 } INDEX { tcpConnLocalAddress, tcpConnLocalPort,
tcpConnRemAddress, tcpConnRemPort }
::= { tn3270eTcpConnTable 1 }
Tn3270TcpConnEntry ::= Tn3270eTcpConnEntry ::=
SEQUENCE SEQUENCE
{ {
tn3270TcpConnLastActivity TimeTicks, tn3270eTcpConnLastActivity TimeTicks,
tn3270TcpConnBytesIn Integer32, tn3270eTcpConnBytesIn Counter32,
tn3270TcpConnBytesOut Integer32, tn3270eTcpConnBytesOut Counter32,
tn3270TcpConnReXmt Integer32, tn3270eTcpConnTargetAppl DisplayString,
tn3270TcpConnReXmtCount Integer32, tn3270eTcpConnResourceName DisplayString,
tn3270TcpConnRoundTripTime Integer32, tn3270eTcpConnResourceType ResourceType,
tn3270TcpConnRoundTripVariance Integer32, tn3270eTcpConnClientUserId DisplayString,
tn3270TcpConnTargetAppl DisplayString, tn3270eTcpConnDeviceType DeviceTypes,
tn3270TcpConnLuName DisplayString, tn3270eTcpConnProto Tn3270Functions
tn3270TcpConnClientUserId DisplayString,
tn3270TcpConnLogMode DisplayString,
tn3270TcpConnProto OCTET STRING
} }
tn3270TcpConnLastActivity OBJECT-TYPE tn3270eTcpConnLastActivity OBJECT-TYPE
Expires November 1997 [Page 25]~
SYNTAX TimeTicks SYNTAX TimeTicks
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of 100ths of seconds since this entry "The number of 100ths of seconds since this entry
was last used." was last used."
DEFVAL { 0 } DEFVAL { 0 }
::= { tn3270TcpConnEntry 1 } ::= { tn3270eTcpConnEntry 1 }
tn3270TcpConnBytesIn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes received from IP for this
connection."
DEFVAL { 0 }
::= { tn3270TcpConnEntry 2 }
tn3270TcpConnBytesOut OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes sent to IP for this connection."
DEFVAL { 0 }
::= { tn3270TcpConnEntry 3 }
tn3270TcpConnReXmt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of retransmissions"
DEFVAL { 0 }
::= { tn3270TcpConnEntry 4 }
tn3270TcpConnReXmtCount OBJECT-TYPE tn3270eTcpConnBytesIn OBJECT-TYPE
SYNTAX Integer32 SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Current retransmission count" "The number of bytes received by the Server from TCP
DEFVAL { 0 } for this connection."
::= { tn3270TcpConnEntry 5 } ::= { tn3270eTcpConnEntry 2 }
tn3270TcpConnRoundTripTime OBJECT-TYPE
SYNTAX Integer32
Expires November 1997 [Page 26]~ tn3270eTcpConnBytesOut OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The amount of time that has elapsed, measured in "The number of bytes sent to TCP for this connection."
milliseconds, from when the last TCP segment was ::= { tn3270eTcpConnEntry 3 }
transmitted by the TCP Stack until the ACK was
received."
DEFVAL { 0 }
::= { tn3270TcpConnEntry 6 }
tn3270TcpConnRoundTripVariance OBJECT-TYPE tn3270eTcpConnTargetAppl OBJECT-TYPE
SYNTAX Integer32 SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Round trip time variance." "When the corresponding TCP connection is for a
DEFVAL { 0 } 3172 Telnet session then this object contains the
::= { tn3270TcpConnEntry 7 } Target VTAM Application name. For gateway server
implementations this object will not be known and
should be returned as a null OCTET STRING."
::= { tn3270eTcpConnEntry 4 }
tn3270TcpConnTargetAppl OBJECT-TYPE tn3270eTcpConnResourceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8)) SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"When the corresponding TCP connection is for a "LU/Print secondary name for connecting a IP Client
3172 Telnet session then this object contains the into a SNA network."
Target VTAM Application name." ::= { tn3270eTcpConnEntry 5 }
::= { tn3270TcpConnEntry 8 }
tn3270TcpConnLuName OBJECT-TYPE tn3270eTcpConnResourceType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8)) SYNTAX ResourceType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"When the corresponding TCP connection is for a "Indicates the type of resource identified by
3172 Telnet session then this object contains the tn3270eTcpConnResourceName."
VTAM LU name." ::= { tn3270eTcpConnEntry 6 }
::= { tn3270TcpConnEntry 9 }
tn3270TcpConnClientUserId OBJECT-TYPE tn3270eTcpConnClientUserId OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8)) SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"When the corresponding TCP connection is for a "When the corresponding TCP connection is for a
3172 Telnet session then this object contains the 3172 Telnet session then this object contains the
Client's userid." Client's userid."
::= { tn3270TcpConnEntry 10 } ::= { tn3270eTcpConnEntry 7 }
Expires November 1997 [Page 27]~ tn3270eTcpConnDeviceType OBJECT-TYPE
tn3270TcpConnLogMode OBJECT-TYPE SYNTAX DeviceTypes
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"When the corresponding TCP connection is for a "Indicates the device type if negiotiated with client."
3172 Telnet session then this object contains the ::= { tn3270eTcpConnEntry 8 }
LOG Mode."
::= { tn3270TcpConnEntry 11 }
tn3270TcpConnProto OBJECT-TYPE tn3270eTcpConnProto OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4)) SYNTAX Tn3270Functions
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This flag will indicates the following Telnet modes: "This flag will indicates which of the TN3270 and TN3270E
-bit(1 - 28) = <reserved> functions that are supported by the Server was negioted
-bit(29) = TN3270EE mode with a client. Refer to tn3270eSrvrConfProtoSupported."
-bit(30) = TN3270 mode ::= { tn3270eTcpConnEntry 9 }
-bit(31) = TN3270E mode
-bit(32) = line mode"
::= { tn3270TcpConnEntry 12 }
-- Conformance Definitions -- Conformance Definitions
tn3270Groups OBJECT IDENTIFIER ::= { tn3270Conformance 1 } tn3270eGroups OBJECT IDENTIFIER ::= { tn3270eConformance 1 }
tn3270Compliances OBJECT IDENTIFIER ::= { tn3270Conformance 2 } tn3270eCompliances OBJECT IDENTIFIER ::= { tn3270eConformance 2 }
-- compliance statements tn3270Compliance MODULE-COMPLIANCE -- compliance statements tn3270eCompliance MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The compliance statement for agents that support the TN3270 "The compliance statement for agents that support the TN3270
MIB." MIB."
MODULE -- this module MODULE -- this module
MANDATORY-GROUPS { tn3270BasicGroup, MANDATORY-GROUPS { tn3270eBasicGroup,
tn3270TcpConnTableGroup tn3270eSessionGroup
} }
::= { tn3270Compliances 1 } GROUP tn3270ePoolGroup
DESCRIPTION
"This group is optional."
OBJECT tn3270eSrvrConfActivityCheck
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a set to this
object if the associating TN3270 Server doesn't
support either TIMEMARK or NOP processing. In
this case an agent should return noCheck on
retrieval."
OBJECT tn3270eSrvrConfActivityTimeout
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a set to this
object if the functions enabled by
tn3270eSrvrConfActivityCheck are not supported.
An agent in this case should return a value of 0."
OBJECT tn3270eSrvrConfActivityInterval
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a set to this
object if the functions enabled by
tn3270eSrvrConfActivityCheck are not supported.
An agent in this case should return a value of 0."
OBJECT tn3270eTcpConnTargetAppl
DESCRIPTION
"A TN3270 Server is not required to support this
object if it doesn't provide for Target Application
mapping. In this case either a null OCTET STRING
can be returned or noSuchObject."
OBJECT tn3270eTcpConnClientUserId
DESCRIPTION
"A TN3270 Server is not required to support this
object if it doesn't provide for Target Application
mapping. In this case either a null OCTET STRING
can be returned or noSuchObject."
::= { tn3270eCompliances 1 }
-- units of conformance tn3270BasicGroup OBJECT-GROUP -- units of conformance
OBJECTS {
tn3270Port,
tn3270InactivityTimer,
tn3270Timemark,
tn3270ScanInterval,
tn3270BinaryLineMode,
tn3270DisableSga,
Expires November 1997 [Page 28]~ tn3270eBasicGroup OBJECT-GROUP
tn3270AdminStatus, OBJECTS {
tn3270OperStatus, tn3270eSrvrConfInactivityTimer,
tn3270DefaultApplName, tn3270eSrvrConfActivityCheck,
tn3270DefaultApplIpAddress, tn3270eSrvrConfActivityTimeout,
tn3270DefaultApplIpGroupName, tn3270eSrvrConfActivityInterval,
tn3270DefaultApplIfIndex, tn3270eSrvrConfProtoSupported,
tn3270TelnetAppl, tn3270eSrvrConfAdminStatus,
tn3270LmApplName, tn3270eSrvrConfOperStatus,
tn3270LmApplIpAddress, tn3270eSrvrConfSessionTermState,
tn3270LmApplIpGroupName, tn3270eSrvrConfSrvrType,
tn3270LmApplIfIndex, tn3270eSrvrConfRowStatus,
tn3270UsstcpTableName, tn3270eSrvrPortRowStatus,
tn3270UsstcpIpAddress, tn3270eSrvrStatsUpTime,
tn3270UsstcpIpGroupName, tn3270eSrvrStatsMaxLus,
tn3270UsstcpIfIndex, tn3270eSrvrStatsLusInUse,
tn3270SessionTermState, tn3270eSrvrStatsSpareLus,
tn3270Msg07Enabled, tn3270eSrvrStatsMaxPtrs,
tn3270OldSolicitorEnabled, tn3270eSrvrStatsPtrsInUse,
tn3270AllowApplDisconnect, tn3270eSrvrStatsSparePtrs,
tn3270AllowApplRowStatus, tn3270eSrvrStatsConnectsIn,
tn3270AllowApplLuRowStatus, tn3270eSrvrStatsConnRejects,
tn3270RestrictApplDisconnect, tn3270eSrvrStatsDisconnects,
tn3270RestrictApplRowStatus, tn3270eResMapIpAddress,
tn3270RestrictApplUserRowStatus, tn3270eResMapSubnetMask,
tn3270RestrictApplULuRowStatus, tn3270eResMapElementType,
tn3270IpGroupSubnetMask, tn3270eResMapRowStatus,
tn3270IpGroupIpSubnet, tn3270eIpMapResElementName,
tn3270IpGroupRowStatus, tn3270eIpMapElementType,
tn3270LuGroupRowStatus, tn3270eIpMapRowStatus
tn3270PrtGroupRowStatus,
tn3270LuMapIpAddr,
tn3270LuMapIpGroupName,
tn3270LuMapRowStatus,
tn3270PrtMapIpAddr,
tn3270PrtMapIpGroupName,
tn3270PrtMapRowStatus,
tn3270LogmodeName,
tn3270LogmodeRowStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group is mandatory for all hosts supporting the "This group is mandatory for all hosts supporting the
TN3270 connections." TN3270E-MIB."
::= { tn3270Groups 1 } ::= { tn3270eGroups 1 }
tn3270TcpConnTableGroup OBJECT-GROUP tn3270ePoolGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tn3270TcpConnLastActivity, tn3270eIpGroupSubnetMask,
tn3270eIpGroupRowStatus,
tn3270eResPoolElementType,
tn3270eResPoolIpGroupName,
tn3270eResPoolClientPort,
tn3270eResPoolRowStatus
}
STATUS current
DESCRIPTION
"This group is optional and allows a server to configure
a collection of IP Address and Resource Pools and their
mappings."
::= { tn3270eGroups 2 }
Expires November 1997 [Page 29]~ tn3270eSessionGroup OBJECT-GROUP
tn3270TcpConnBytesIn, OBJECTS {
tn3270TcpConnBytesOut, tn3270eTcpConnLastActivity,
tn3270TcpConnReXmt, tn3270eTcpConnBytesIn,
tn3270TcpConnReXmtCount, tn3270eTcpConnBytesOut,
tn3270TcpConnRoundTripTime, tn3270eTcpConnTargetAppl,
tn3270TcpConnRoundTripVariance, tn3270eTcpConnResourceName,
tn3270TcpConnTargetAppl, tn3270eTcpConnResourceType,
tn3270TcpConnLuName, tn3270eTcpConnClientUserId,
tn3270TcpConnClientUserId, tn3270eTcpConnDeviceType,
tn3270TcpConnLogMode, tn3270eTcpConnProto
tn3270TcpConnProto
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group is mandatory for all hosts supporting the "This group is mandatory for all hosts supporting the
TN3270 connections." TN3270E-MIB."
::= { tn3270Groups 2 } ::= { tn3270eGroups 3 }
END END
5. Security Considerations 5. Security Considerations
Certain management information defined in this MIB may be considered Certain management information defined in this MIB may be considered
sensitive in some network environments. Therefore, authentication of sensitive in some network environments. Therefore, authentication of
received SNMP requests and controlled access to management information received SNMP requests and controlled access to management information
should be employed in such environments. The method for this should be employed in such environments. The method for this
authentication is a function of the SNMP Administrative Framework, and authentication is a function of the SNMP Administrative Framework, and
has not been expanded by this MIB. has not been expanded by this MIB.
Several objects in this MIB allow write access or provide for remote Several objects in this MIB allow write access or provide for remote
creation. Allowing this support in a non-secure environment can have a creation. Allowing this support in a non-secure environment can have a
negative effect on network operations. It is recommended that negative effect on network operations. It is recommended that
implementers seriously consider whether set operations should be implementers seriously consider whether set operations should be
allowed without providing, at a minimum, authentication of request allowed without providing, at a minimum, authentication of request
origin. It it recommended that without such support that the following origin. It it recommended that without such support that the following
objects be implemented as read-only: objects be implemented as read-only:
o tn3270Port o tn3270eSrvrConfInactivityTimer
o tn3270InactivityTimer o tn3270eSrvrConfActivityCheck
o tn3270Timemark o tn3270eSrvrConfActivityTimeout
o tn3270ScanInterval o tn3270eSrvrConfActivityInterval
o tn3270BinaryLineMode o tn3270eSrvrConfAdminStatus
o tn3270DisableSga o tn3270eSrvrConfSessionTermState
o tn3270AdminStatus o tn3270eIpGroupSubnetMask
o tn3270DefaultApplName o tn3270eResPoolIpGroupName
o tn3270DefaultApplIpAddress o tn3270eResPoolElementType
o tn3270eResPoolClientPort
Expires November 1997 [Page 30]~ o tn3270eResMapIpAddress
o tn3270DefaultApplIpGroupName o tn3270eResMapSubnetMask
o tn3270DefaultApplIfIndex o tn3270eResMapElementType
o tn3270TelnetAppl o tn3270eIpMapResElementName
o tn3270LmApplName o tn3270eIpMapElementType
o tn3270LmApplIpAddress
o tn3270LmApplIpGroupName
o tn3270LmApplIfIndex
o tn3270UsstcpTableName
o tn3270UsstcpIpAddress
o tn3270UsstcpIpGroupName
o tn3270UsstcpIfIndex
o tn3270SessionTermState
o tn3270Msg07Enabled
o tn3270OldSolicitorEnabled
o tn3270AllowApplDisconnect
o tn3270AllowApplLuRowStatus
o tn3270RestrictApplDisconnect
o tn3270RestrictApplUserRowStatus
o tn3270RestrictApplULuRowStatus
o tn3270IpGroupSubnetMask
o tn3270IpGroupIpSubnet
o tn3270LuGroupRowStatus
o tn3270PrtGroupRowStatus
o tn3270LuMapIpAddr
o tn3270LuMapIpGroupName
o tn3270PrtMapIpAddr
o tn3270PrtMapIpGroupName
o tn3270LogmodeName
The following objects should either be implemented as read-only or not The following objects should either be implemented as read-only or not
implemented when security is an issue as previously discussed: implemented when security is an issue as previously discussed:
o tn3270AllowApplRowStatus o tn3270eSrvrConfRowStatus
o tn3270RestrictApplRowStatus o tn3270eSrvrPortRowStatus
o tn3270IpGroupRowStatus o tn3270eIpGroupRowStatus
o tn3270LuMapRowStatus o tn3270eResPoolRowStatus
o tn3270PrtMapRowStatus o tn3270eResMapRowStatus
o tn3270LogmodeRowStatus o tn3270eIpMapRowStatus
6. Acknowledgments 6. Acknowledgments
This document is a product of the TN3270E Working Group. This document is a product of the TN3270E Working Group.
7. References 7. References
Expires November 1997 [Page 31]~
[1] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and [1] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and
Waldbusser S., "Structure of Management Information for version 2 Waldbusser S., "Structure of Management Information for version 2
of the Simple Network Management Protocol (SNMPv2)", RFC 1902, of the Simple Network Management Protocol (SNMPv2)", RFC 1902,
January 1996. January 1996.
[2] Network Working Group, Postel, J., and Reynolds, J., "Telnet [2] Network Working Group, Postel, J., and Reynolds, J., "Telnet
Protocol Specification", RFC 854, May 1983. Protocol Specification", RFC 854, May 1983.
[3] Network Working Group, Postel, J., and Reynolds, J., "Telnet Timing [3] Network Working Group, Postel, J., and Reynolds, J., "Telnet Timing
Mark Option", RFC 860, May 1983. Mark Option", RFC 860, May 1983.
skipping to change at line 1565 skipping to change at page 31, line 16
Waldbusser, "Conformance Statements for version 2 of the Simple Waldbusser, "Conformance Statements for version 2 of the Simple
Network Management Protocol (SNMPv2)", RFC 1904, January 1996. Network Management Protocol (SNMPv2)", RFC 1904, January 1996.
[9] Case, J., M. Fedor, M. Schoffstall, J. Davin, "Simple Network [9] Case, J., M. Fedor, M. Schoffstall, J. Davin, "Simple Network
Management Protocol", RFC 1157, SNMP Research, Performance Systems Management Protocol", RFC 1157, SNMP Research, Performance Systems
International, MIT Laboratory for Computer Science, May 1990. International, MIT Laboratory for Computer Science, May 1990.
[10] IETF SNMPv2 Working Group and McCloghrie, K., "TCP-MIB [10] IETF SNMPv2 Working Group and McCloghrie, K., "TCP-MIB
Definitions", November 1994. Definitions", November 1994.
Expires November 1997 [Page 32]~ 8. Authors' Address
8. Authors' Addresses
Kenneth D. White Kenneth D. White
Dept. G80/Bldg 503 Dept. G80/Bldg 503
IBM Corporation IBM Corporation
Research Triangle Park, NC 27709, USA Research Triangle Park, NC 27709, USA
E-mail: kennethw@vnet.ibm.com E-mail: kennethw@vnet.ibm.com
Expires November 1997 [Page 33]~
 End of changes. 213 change blocks. 
1002 lines changed or deleted 854 lines changed or added

This html diff was produced by rfcdiff 1.34. The latest version is available from http://tools.ietf.org/tools/rfcdiff/