draft-ietf-tn3270e-tn3270-mib-04.txt   draft-ietf-tn3270e-tn3270-mib-05.txt 
TN3270E Working Group TN3270E Working Group Kenneth White
INTERNET DRAFT: <draft-ietf-tn3270e-tn3270-mib-04.txt> Kenneth White INTERNET DRAFT: <draft-ietf-tn3270e-tn3270-mib-05.txt> IBM Corp.
Expiration Date: May, 1998 Expiration Date: July, 1998 Robert Moore
IBM Corp. IBM Corp.
January 1998
November 1997
Base Definitions of Managed Objects for Base Definitions of Managed Objects for
TN3270E Using SMIv2 TN3270E Using SMIv2
<draft-ietf-tn3270e-tn3270-mib-05.txt>
<draft-ietf-tn3270e-tn3270-mib-04.txt>
Status of this Memo Status of this Memo
This document is an Internet Draft. Internet Drafts are working This document is an Internet Draft. Internet Drafts are working
documents of the Internet Engineering Task Force (IETF), its Areas, documents of the Internet Engineering Task Force (IETF), its Areas, and
and its Working Groups. Note that other groups may also distribute its Working Groups. Note that other groups may also distribute working
working documents as Internet Drafts. documents as Internet Drafts.
Internet Drafts are draft documents valid for a maximum of six Internet Drafts are draft documents valid for a maximum of six months.
months. Internet Drafts may be updated, replaced, or obsoleted by Internet Drafts may be updated, replaced, or obsoleted by other
other documents at any time. It is not appropriate to use Internet documents at any time. It is not appropriate to use Internet Drafts as
Drafts as reference material or to cite them other than as a "working reference material or to cite them other than as a "working draft" or
draft" or "work in progress." "work in progress."
Please check the I-D abstract listing contained in each Internet Please check the I-D abstract listing contained in each Internet Draft
Draft directory to learn the current status of this or any Internet directory to learn the current status of this or any Internet Draft.
Draft. Distribution of this document is unlimited. Distribution of this document is unlimited.
Copyright Notice
Copyright (C) The Internet Society (1998). All Rights Reserved.
Abstract Abstract
The purpose of this memo is to define a Management Information Base This memo defines a Management Information Base (MIB) for configuring
(MIB) for configuring and managing TN3270E Servers. and managing TN3270E servers. TN3270E, defined by RFC 1647 (reference
The MIB defined by this memo is intended to provide generic [14]), refers to the enhancements made to the Telnet 3270 (TN3270)
support for both Host and Gateway TN3270E server implementations. terminal emulation practices. Refer to: RFC 1041, reference [4]; RFC
It is the intent that the MIB defined herein be extended 854, reference [2]; and RFC 860, reference [3] for a sample of what is
by subsequent memos to provide non-generic configuration support meant by TN3270 practices.
and to enable TN3270E Response Time Collection.
It is the intent of this MIB to fully adhere to all prerequisite MIBs The MIB defined by this memo provides generic support for both host and
unless explicitly stated. Deviations will be documented in gateway TN3270E server implementations. A host TN3270E server refers to
corresponding conformance statements. The specification of this MIB an implementation where the TN3270E server is collocated with the
will utilize the Structure of Management Information (SMI) for Systems Network Architecture (SNA) System Services Control Point (SSCP)
Version 2 of the Simple Network Management Protocol Version (refer to for the dependent Secondary Logical Units (SLUs) that the server makes
RFC1902, reference [1]). available to its clients for connecting into a SNA network.
A gateway TN3270E server resides on an SNA node other than an SSCP,
either an SNA type 2.0 node or an APPN node acting in the role of a
Dependent LU Requester (DLUR). Host and gateway TN3270E server
implementations typically differ greatly as to their internal
implementation and system definition (SYSDEF) requirements.
It is the intent that the MIB defined herein be extended by subsequent
memos, to provide non-generic configuration support and to enable
TN3270E response time collection. The specification of this MIB uses
the Structure of Management Information (SMI) for Version 2 of the
Simple Network Management Protocol Version (refer to RFC 1902, reference
[1]).
Table of Contents Table of Contents
Expires May 1998 [Page 1]~ 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 2
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997 2.0 The SNMPv2 Network Management Framework . . . . . . . . . . . 3
1.0 Introduction............................................. 2 3.0 Structure of the MIB . . . . . . . . . . . . . . . . . . . . . 3
2.0 The SNMPv2 Network Management Framework.................. 2 3.1 TN3270E Server Control . . . . . . . . . . . . . . . . . . . . 4
2.1 Object Definitions....................................... 3 3.1.1 tn3270eSrvrConfTable . . . . . . . . . . . . . . . . . . . 5
3.0 Structure of the MIB..................................... 3 3.1.2 tn3270eSrvrPortTable . . . . . . . . . . . . . . . . . . . 5
3.1 TN3270E Server Control................................... 4 3.1.3 tn3270eSrvrStatsTable . . . . . . . . . . . . . . . . . . 6
3.1.1 tn3270eSrvrConfTable................................... 4 3.2 TN3270E Server Resource Configuration . . . . . . . . . . . . 6
3.1.2 tn3270eSrvrPortTable................................... 5 3.3 Resource Name / Client Address Mappings . . . . . . . . . . . 6
3.1.3 tn3270eSrvrStatsTable.................................. 5 3.3.1 tn3270eSnaMapTable . . . . . . . . . . . . . . . . . . . . 6
3.2 TN3270E Server Resource Configuration.................... 6 3.3.2 tn3270eResMapTable . . . . . . . . . . . . . . . . . . . . 7
3.3 Resource/Client Address Mappings......................... 6 3.3.3 tn3270eTcpConnTable . . . . . . . . . . . . . . . . . . . 7
3.3.1 tn3270eSnaMapTable..................................... 6 3.4 Advisory Spin Lock Usage . . . . . . . . . . . . . . . . . . . 8
3.3.2 tn3270eResMapTable..................................... 6 3.5 IANA Considerations . . . . . . . . . . . . . . . . . . . . . 8
3.3.3 TCP Connection Table Additions......................... 7
4.0 Definitions.............................................. 7
5.0 Security Considerations..................................40
6.0 Acknowledgments..........................................40
7.0 References...............................................41
8.0 Authors' Address.........................................42
1. Introduction 4.0 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 8
This document is a product of the TN3270E Working Group. Its purpose 5.0 Security Considerations . . . . . . . . . . . . . . . . . . . 41
is to define a MIB module for extending the traditional MIBs supported
by a TCP/IP implementation for configuration and management of TN3270E
servers.
2. The SNMPv2 Network Management Framework 6.0 Intellectual Property . . . . . . . . . . . . . . . . . . . . 42
The SNMP Network Management Framework presently consists of three 7.0 Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 42
major components. They are:
o the SMI, described in RFC 1902 [1], - the mechanisms used for 8.0 References . . . . . . . . . . . . . . . . . . . . . . . . . . 42
describing and naming objects for the purpose of management.
o the MIB-II, STD 17, RFC 1213 [5], - the core set of managed 9.0 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . 43
objects for the Internet suite of protocols.
o the protocol, RFC 1157 [9] and/or RFC 1905 [7] - the protocol 10.0 Full Copyright Statement . . . . . . . . . . . . . . . . . . 44
for accessing managed information.
Textual conventions are defined in RFC 1903 [6], and conformance 1.0 Introduction
statements are defined in RFC 1904 [8].
The Framework permits new objects to be defined for the purpose of This document is a product of the TN3270E Working Group. Its purpose is
experimentation and evaluation. to define a MIB module for support by a TCP/IP implementation for
configuration and management of TN3270E servers.
Expires May 1998 [Page 2]~ The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119, reference [13].
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997 2.0 The SNMPv2 Network Management Framework
This memo specifies a MIB module that is compliant to the SNMPv2 SMI. The SNMPv2 Network Management Framework consists of seven major
A semantically identical MIB conforming to the SNMPv1 SMI can be components. They are:
produced through the appropriate translation.
2.1. Object Definitions o RFC 1902 [1] which defines the SMI, the mechanisms used for
describing and naming objects for the purpose of management.
Managed objects are accessed via a virtual information store, termed o RFC 1903 [6] defines textual conventions for SNMPv2.
the Management Information Base or MIB. Objects in the MIB are
defined using the subset of Abstract Syntax Notation One (ASN.1)
defined in the SMI. In particular, each object object type is named
by an OBJECT IDENTIFIER, an administratively assigned name. The
object type together with an object instance serves to uniquely
identify a specific instantiation of the object. For human
convenience, we often use a textual string, termed the descriptor, to
refer to the object type.
3. Structure of the MIB o RFC 1904 [8] defines conformance statements for SNMPv2.
o RFC 1905 [7] defines transport mappings for SNMPv2.
o RFC 1906 [5] defines the protocol operations used for network access
to managed objects.
o RFC 1907 [9] defines the Management Information Base for SNMPv2.
o RFC 1908 [16] specifies coexistence between SNMP and SNMPv2.
The Framework permits new objects to be defined for the purpose of
experimentation and evaluation.
This memo specifies a MIB module that is compliant to the SNMPv2 SMI. A
semantically identical MIB conforming to the SNMPv1 SMI can be produced
through the appropriate translation.
3.0 Structure of the MIB
The TN3270E-MIB is split into the following components: The TN3270E-MIB is split into the following components:
o TN3270E Server Control o TN3270E Server Control
o TN3270E Server Resource Configuration o TN3270E Server Resource Configuration
o Resource/Client Address Mappings o Resource/Client Address Mappings
There are two additional sections to address:
o Advisory Spin Lock Usage
o IANA Considerations
The TN3270E-MIB is defined primarily for TN3270E servers. This memo The TN3270E-MIB is defined primarily for TN3270E servers. This memo
does not explicitly address use of the MIB by TN3270 servers that do does not explicitly address use of the MIB by TN3270 servers that do not
not support the TN3270E protocol. Although a significant number of support the TN3270E protocol. Even though a significant number of the
the objects do apply in the TN3270-only case, the case was not objects in the MIB do apply in the TN3270-only case, the case was not
addressed since it is unlikely that a TN3270-only server would addressed, since it is unlikely that a TN3270-only server would
implement this MIB. implement this MIB.
The SYSAPPL-MIB, reference [12], is a prerequisite for the TN3270E- The SYSAPPL-MIB, reference [12], contains the Utf8String textual
MIB, so that the Utf8String Textual Convention (TC) can be imported. convention (TC) that the TN3270E-MIB imports. This TC, which is used
This TC, which is used for some MIB objects containing textual for some MIB objects containing textual information, enables
information, enables internationalization of text strings, whereas the internationalization of text strings, whereas the DisplayString TC does
DisplayString TC does not. not.
The MIB defined by this memo handles both IPv4 and IPv6 addressing.
Two Textual Conventions, Tn3270eAddrType and Tn3270eTAddress, are
defined for this purpose. Tn3270eTAddress is essentially equivalent
to TAddress, defined by RFC 1903. The difference is that
Tn3270eTAddress allows a null-length octet string, while TAddress
doesn't. Allowing a null IP Address is important, since in places
Tn3270eTAddress object values are used as a component of an object
instance, and need not actually contain an IP Address. In general, use
Expires May 1998 [Page 3]~ It is important to note that implementation of the SYSAPPL-MIB is not
actually a prerequisite for implementing the TN3270E-MIB. On the other
hand, implementation of the TN3270E-MIB does not preclude implementing
the SYSAPPL-MIB as well. When both MIBs are implemented, the primary
index into most of the TN3270E-MIB tables, tn3270eSrvrConfIndex, SHOULD
equal one of the SYSAPPL-MIB's sysApplElmtRunIndex values. In this case
the entry in the sysApplElmtRunTable provides additional information on
a TN3270E server.
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997 The SNMP-FRAMEWORK-MIB, reference [15], contains the SnmpAdminString TC
that the TN3270E-MIB imports. Like the Utf8String TC, this TC also
enables internationalization of text strings; in addition, it provides
some guidelines on the length and content of the strings.
of Tn3270eTAddress replaces the prior use of IpAddress to represent IP The MIB defined by this memo handles both IPv4 and IPv6 addressing. Two
Addresses. textual conventions, Tn3270eAddrType and Tn3270eTAddress, are defined
for this purpose. Tn3270eTAddress is essentially equivalent to the
TAddress TC, defined by RFC 1903. The difference between the two is
that Tn3270eTAddress allows a zero-length octet string, while TAddress
doesn't. It is important that Tn3270eTAddress allow for the absence of
an address, because some objects with this syntax are used as table
indexes, and have special meanings when they contain zero-length
strings.
Tn3270eAddrType is functionally equivalent to the TDomain TC, also The Tn3270eAddrType textual convention is used rather than the TDomain
defined by RFC 1903. TDomain uses an OID to identify the contents of TC (defined by RFC 1903) for identifying the contents of a
a TAddress object. Tn3270eAddrType was chosen over TDomain because, tn3270eTAddress object. TDomain uses an OID to characterize the
with a SYNTAX of Unsigned32 (enumeration type), it is much simpler contents of an associated TAddress object. Tn3270eAddrType was chosen
than an OID to specify in an instance identifier. over TDomain because, with a SYNTAX of Unsigned32 (enumeration type), it
is much simpler to use as a component in an instance identifier.
3.1. TN3270E Server Control 3.1 TN3270E Server Control
This group of objects provides for TN3270E server configuration, and This group of objects provides for TN3270E server configuration and
consists of: control. It consists of three tables:
o tn3270eSrvrConfTable o tn3270eSrvrConfTable
o tn3270eSrvrPortTable o tn3270eSrvrPortTable
o tn3270eSrvrStatsTable o tn3270eSrvrStatsTable
3.1.1. tn3270eSrvrConfTable The tn3270eSrvrConfTable is the primary table within the entire
TN3270E-MIB. As section 3.1.1 indicates, each TN3270E server is
represented by an entry in this table, indexed by tn3270eSrvrConfIndex.
Most of the other tables defined by the TN3270E-MIB have
tn3270eSrvrConfIndex as their primary index. Entries in these tables
MUST NOT exist for a TN3270E server when it does not have a
tn3270eSrvrConfigEntry.
The tn3270eSrvrConfTable contains a set of objects primarily for 3.1.1 tn3270eSrvrConfTable
configuring and managing a TN3270E server. As with most of the other
tables in the TN3270E-MIB, this table is indexed by an unsigned
integer, tn3270eSrvrConfIndex. This primary index element enables
support of multiple TN3270E servers on the same host. Within a host,
tn3270eSrvrConfIndex values must be unique, and need not be
contiguous; otherwise these values are implementation-dependent.
An earlier version of this memo had used the local IP Address The tn3270eSrvrConfTable contains a set of objects primarily used for
associated with a TN3270E server along with tn3270eSrvrConfIndex as configuring and managing TN3270E servers. As with most of the other
the primary indexes into most of its tables. Use of a local IP tables in the TN3270E-MIB, this table is indexed by an unsigned integer,
Address was thought to enable use of these tables by management tn3270eSrvrConfIndex. This primary index element enables support of
applications. This approach was dropped, since it introduces a level multiple TN3270E servers by a single SNMP agent. Within the set of MIB
of complexity into MIB table indexing for little actual benefit. objects returned by one SNMP agent, tn3270eSrvrConfIndex values MUST be
unique, and need not be contiguous; otherwise these values are
implementation-dependent.
tn3270eSrvrConfInactivityTimer defines the inactivity period for An earlier version of this memo had used the local IP address associated
TN3270 and TN3270E Sessions. tn3270eSrvrConfSessionTermState defines with a TN3270E server, along with tn3270eSrvrConfIndex, as the primary
how a session should be terminated. The three objects: indexes into most of its tables. Use of a local IP address was thought
to enable use of these tables by management applications. This approach
was dropped, since it introduced another level of complexity into MIB
table indexing for little actual benefit.
The tn3270eSrvrConfInactivityTimer object defines the inactivity period
for TN3270 and TN3270E sessions. The tn3270eSrvrConfSessionTermState
object defines how a session SHOULD be terminated. The three objects:
o tn3270eSrvrConfActivityCheck o tn3270eSrvrConfActivityCheck
o tn3270eSrvrConfActivityTimeout o tn3270eSrvrConfActivityTimeout
o tn3270eSrvrConfActivityInterval o tn3270eSrvrConfActivityInterval
define the parameters for performing the "Telnet Timing Mark Option" define the parameters for performing the "Telnet Timing Mark Option" as
as defined by RFC 860 [3]. The object tn3270eSrvrConfActivityCheck is defined by RFC 860 [3]. The object tn3270eSrvrConfActivityCheck allows
defined to enable selection of either a NOP command or a TIMEMARK a Management Station to select either a NOP command or a TIMEMARK
command. Sending a NOP command results in less overhead then a TIMEMARK
Expires May 1998 [Page 4]~ command, since a client doesn't send a reply.
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
command. Sending a NOP command results in less overhead then a
TIMEMARK command, since a client doesn't send a reply.
The objects tn3270eSrvrConfAdminStatus and tn3270eSrvrConfOperStatus The objects tn3270eSrvrConfAdminStatus and tn3270eSrvrConfOperStatus
enable remote starting and stopping of a TN3270E server. enable remote starting and stopping of a TN3270E server.
tn3270eSrvrConfFunctionsSupported indicates which of the TN3270 and tn3270eSrvrConfFunctionsSupported indicates which of the TN3270 and
TN3270E options a server supports. The object TN3270E options a server supports. The object
tn3270eSrvrConfSessionTermState defines as a global option the tn3270eSrvrConfSessionTermState defines as a TN3270E server-wide option
processing steps that a TN3270E server should perform when a TN3270E what SHOULD occur when the SNA portion of a TN3270 or TN3270E session
session terminates with respect to the associated TCP connection. The terminates with respect to the associated TCP connection. The object
object tn3270eSrvrConfSrvrType indicates whether the TN3270E server tn3270eSrvrConfSrvrType indicates whether the TN3270E server represented
represented by the tn3270eSrvrConfEntry is a host or a gateway server. by a tn3270eSrvrConfEntry is a host or a gateway server. The object
The object tn3270eSrvrConfContact provides a scratch pad area for a tn3270eSrvrConfContact provides a scratch pad area for a TN3270E server
TN3270E server administrator to store information for later retrieval. administrator to store information for later retrieval. The object
The object tn3270eSrvrConfRowStatus provides the capability to perform tn3270eSrvrConfRowStatus provides the capability to perform row creation
remote creation and deletion operations on this table. and deletion operations on this table.
3.1.2. tn3270eSrvrPortTable 3.1.2 tn3270eSrvrPortTable
The tn3270eSrvrPortTable exists in order to assign and retrieve the The tn3270eSrvrPortTable represents the local TCP ports associated with
local TCP ports associated with a TN3270E server, since some TN3270E a TN3270E server. This information is important because some TN3270E
server implementations support multiple local ports. A server implementations support multiple local ports. A
tn3270eSrvrPortEntry is indexed by: tn3270eSrvrPortEntry is indexed by:
o tn3270eSrvrConfIndex o tn3270eSrvrConfIndex
o tn3270eSrvrConfPort o tn3270eSrvrConfPort
o tn3270eSrvrConfPortAddrType o tn3270eSrvrConfPortAddrType
o tn3270eSrvrConfPortAddress o tn3270eSrvrConfPortAddress
Certain TN3270E server implementations retrict a local TCP port to a Certain TN3270E server implementations restrict a local TCP port to a
particular local IP Address, instead of allowing connections for any particular local IP address, instead of allowing connections for any
local IP Address to occur via the port. tn3270eSrvrConfPortAddrType local IP address to occur via the port. tn3270eSrvrConfPortAddrType and
and tn3270eSrvrConfPortAddress allow this restriction to be tn3270eSrvrConfPortAddress allow this restriction to be represented in
represented in the MIB. A TN3270E server that doesn't restrict the MIB. A TN3270E server that doesn't restrict connections over a port
connections over a port to a local IP Address should use the value to a local IP Address SHOULD use the value unknown(0) for
'unknown(0)' for tn3270eSrvrConfPortAddrType, and a null octet string tn3270eSrvrConfPortAddrType, and a zero-length octet string for
for tn3270eSrvrConfPortAddress. tn3270eSrvrConfPortAddress.
3.1.3. tn3270eSrvrStatsTable
The tn3270eSrvrStatsTable defines a series of objects used to provide
general statistics on the use of a TN3270E server.
Expires May 1998 [Page 5]~ 3.1.3 tn3270eSrvrStatsTable
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997 The tn3270eSrvrStatsTable defines a series of objects that provide
general usage statistics for a TN3270E server.
3.2. TN3270E Server Resource Configuration 3.2 TN3270E Server Resource Configuration
The TN3270E Server Resource Configuration collection of objects consists The following three tables provide for configuration of resources at a
of three tables: TN3270E server:
o tn3270eClientGroupTable o tn3270eClientGroupTable
o tn3270eResPoolTable o tn3270eResPoolTable
o tn3270eClientResMapTable o tn3270eClientResMapTable
tn3270eClientGroupTable and tn3270eResPoolTable enable implementations tn3270eClientGroupTable and tn3270eResPoolTable enable implementations
to define groupings of both client addresses and resource pools for to define groupings of both client addresses and resource pools for
mapping client addresses to resources. The mapping of a client group to mapping client addresses to resources. The tn3270eClientResMapTable
a resource pool is enabled via the tn3270eClientResMapTable. provides a mapping from a client group to a resource pool.
3.3. Resource/Client Address Mappings 3.3 Resource Name / Client Address Mappings
Three tables are defined by this memo to enable mapping of resource The TN3270E-MIB contains three tables for mapping resource names to
names to client addresses, and client addresses to resource names: client addresses, and client addresses to resource names:
o tn3270eSnaMapTable o tn3270eSnaMapTable
o tn3270eResMapTable o tn3270eResMapTable
o TCP Connection Table Additions o tn3270eTcpConnTable
3.3.1. tn3270eSnaMapTable 3.3.1 tn3270eSnaMapTable
The tn3270eSnaMapTable is a read-only table that maps a secondary LU's The tn3270eSnaMapTable is a read-only table that maps a secondary LU's
SNA network name to the name by which it is known locally at the TN3270e SNA network name to the name by which it is known locally at the TN3270E
server. For correlation with data from a SNA network provision is made server. For correlation with data from the SNA network, the name of the
for representation of the associating primary LU name in a associated primary LU also appears in a tn3270eSnaMapEntry. An entry in
tn3270eSnaMapEntry. An entry in this table is created when the Activate this table is created when the Activate LU (ACTLU) request carrying the
LU (ACTLU) request carrying the SNA network name of the SLU is received SNA network name of the SLU is received from the SSCP. The entry is
from the SSCP. The entry is deleted when the SLU is deactivated. deleted when the SLU is deactivated.
3.3.2. tn3270eResMapTable A TN3270E server provides a client with access to an SNA application by
associating a TCP connection from the client with an SNA secondary LU
(SLU) at the server. This SLU in turn has an SNA session with a primary
LU (PLU) running on an SNA host. This PLU represents the application
with which the client is communicating. The TN3270E-MIB includes two
The tn3270eResMapTable is a read-only table that maps a resource name to tables for mapping back and forth among the SNA name identifying the
a client's address. An entry in this table is created when a TCP PLU, the SNA name identifying the SLU, and the TCP connection with the
connection is received by a TN3270E server and mapped to a resource. The client.
entry is deleted when the resource-to-address association is no longer
valid.
Expires May 1998 [Page 6]~ In order to understand how these name mappings work, it is necessary to
understand a subtlety involving the names of the SLUs at the TN3270E
server: these names are often different from the names by which the
SLUs are known in the rest of the SNA network. In the TN3270E-MIB,
these two types of SLU names are termed "local names" and "SSCP-supplied
names"; the latter term indicates that the name by which the SLU is
known in the SNA network comes to the TN3270E server from the SNA System
Services Control Point.
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997 SSCPs don't always send SLU names down to the secondary LUs; in some
cases this capability must be turned on. In the case of SLUs served by
a Dependent LU Requester (DLUR), the capability is always turned on.
For those associated with an SNA type 2.0 node (or with a boundary
function-attached type 2.1 node), however, inclusion of SLU names on
ACTLU must be enabled explicitly at the SSCP via local configuration.
3.3.3. TCP Connection Table Additions 3.3.2 tn3270eResMapTable
The TCP Connection Table is defined by RFC 2012 (Refer to reference 10, The tn3270eResMapTable is a read-only table that maps a resource name to
TCP-MIB Definitions). Traditionally, the contents of the TCP Connection a client's address. An entry in this table is created when a TCP
Table have been implementation-dependent. Its formal definition connection is received by a TN3270E server and mapped to a resource.
consists of the following objects: The entry is deleted when the resource-to-address association is no
longer valid.
3.3.3 tn3270eTcpConnTable
The TCP Connection Table is defined by RFC 2012 (Refer to reference
[10], TCP-MIB Definitions). It contains the following objects:
o tcpConnState (INTEGER) o tcpConnState (INTEGER)
o tcpConnLocalAddress (IpAddress) o tcpConnLocalAddress (IpAddress)
o tcpConnLocalPort (INTEGER) o tcpConnLocalPort (INTEGER)
o tcpConnRemAddress (IpAddress) o tcpConnRemAddress (IpAddress)
o tcpConnRemPort (INTEGER) o tcpConnRemPort (INTEGER)
It is indexed by: tcpConnLocalAddress, tcpConnLocalPort, It is indexed by: tcpConnLocalAddress, tcpConnLocalPort,
tcpConnRemAddress, and tcpConnRemPort. tcpConnRemAddress, and tcpConnRemPort.
skipping to change at line 327 skipping to change at page 8, line 5
pertaining only to TN3270(E) sessions. pertaining only to TN3270(E) sessions.
The tn3270eTcpConnTable has a different indexing structure from that of The tn3270eTcpConnTable has a different indexing structure from that of
the tcpConnTable. Instead of using IpAddress objects, Tn3270eTAddress the tcpConnTable. Instead of using IpAddress objects, Tn3270eTAddress
and Tn3270eAddrType object pairs are used to specify client addresses and Tn3270eAddrType object pairs are used to specify client addresses
(both local and remote). This enables support of IPv6 addresses. In (both local and remote). This enables support of IPv6 addresses. In
addition, the remote address pair precedes the local address pair in the addition, the remote address pair precedes the local address pair in the
index clause, in order to enable a GET-NEXT operation using only the index clause, in order to enable a GET-NEXT operation using only the
remote address pair. remote address pair.
4. Definitions 3.4 Advisory Spin Lock Usage
Within the TN3270E-MIB, the tn3270eConfSpinLock object provides an
advisory lock that an implementation MAY use to let cooperating
TN3270E-MIB applications coordinate their use of the
tn3270eSrvrConfTable, the tn3270eSrvrPortTable, the
tn3270eClientGroupTable, the tn3270eResPoolTable, and the
tn3270eClientResMapTable. When an application seeks to create a new
entry or alter an existing entry in any of the above mentioned tables,
an implementation MAY require the application to use the
tn3270eConfSpinLock to serialize its changes or additions relative to
those initiated by other applications. Since this is an advisory lock,
an implementation is not required to support it.
3.5 IANA Considerations
The tn3270eSrvrFunctionsSupported, tn3270eTcpConnFunctions,
tn3270eTcpConnClientIdFormat, and tn3270eTcpConnLogInfo objects use
textual conventions imported from the IANATn3270eTC-MIB. The purpose of
defining these textual conventions in a separate MIB module is to allow
additional values to be defined without having to issue a new version of
this document. The Internet Assigned Number Authority (IANA) is
responsible for the assignment of all Internet numbers, including
various SNMP-related numbers; it will administer the values associated
with these textual conventions.
The rules for additions or changes to the IANATn3270eTC-MIB are outlined
in the DESCRIPTION clause associated with its MODULE-IDENTITY statement.
The current version of the IANATn3270eTC-MIB can be accessed from the
IANA homepage at: "http://www.iana.org/iana/".
4.0 Definitions
TN3270E-MIB DEFINITIONS ::= BEGIN TN3270E-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
-- Some MIB Compilers require BITS to be imported from
-- the SNMPv2-SMI
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32,
TimeTicks, IpAddress, TimeTicks, IpAddress,
Counter32, Gauge32, Counter64 Counter32, Gauge32, Counter64
FROM SNMPv2-SMI FROM SNMPv2-SMI
TEXTUAL-CONVENTION, RowStatus TEXTUAL-CONVENTION, RowStatus, TestAndIncr
FROM SNMPv2-TC FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF FROM SNMPv2-CONF
snanauMIB snanauMIB
FROM SNA-NAU-MIB FROM SNA-NAU-MIB
Expires May 1998 [Page 7]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
Utf8String Utf8String
FROM SYSAPPL-MIB; FROM SYSAPPL-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
IANATn3270eClientType, IANATn3270eLogData,
IANATn3270Functions
FROM IANATn3270eTC-MIB;
tn3270eMIB MODULE-IDENTITY tn3270eMIB MODULE-IDENTITY
LAST-UPDATED "9711200000Z" -- November 20, 1997 LAST-UPDATED "9802020000Z" -- February 2, 1998
ORGANIZATION "TN3270E Working Group" ORGANIZATION "TN3270E Working Group"
CONTACT-INFO CONTACT-INFO
"Kenneth White (kennethw@vnet.ibm.com) "Kenneth White (kennethw@vnet.ibm.com)
IBM Corp." IBM Corp. - Dept. BRQA/Bldg. 501/G114
P.O. Box 12195
3039 Cornwallis
RTP, NC 27709-2195
(919) 254-0102
Robert Moore (remoore@us.ibm.com)
IBM Corp. - Dept. BRQA/Bldg. 501/G114
P.O. Box 12195
3039 Cornwallis
RTP, NC 27709-2195
(919) 254-4436"
DESCRIPTION DESCRIPTION
"This module defines a portion of the management "This module defines a portion of the management
information base (MIB) for managing TN3270E servers" information base (MIB) for managing TN3270E servers"
::= { snanauMIB 8 } ::= { snanauMIB 8 }
-- Textual Conventions -- Textual Conventions
SnaResourceName ::= TEXTUAL-CONVENTION SnaResourceName ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The textual convention for defining an SNA resource "The textual convention for defining an SNA resource
name. A fully qualified SNA resource name, consisting of name. A fully qualified SNA resource name, consisting
a 1 to 8 character network identifier (NetId), a of a 1 to 8 character network identifier (NetId), a
period ('.'), and a 1 to 8 character resource name period ('.'), and a 1 to 8 character resource name
(ResName). (ResName).
The NetId and ResName are constructed from the uppercase The NetId and ResName are constructed from the
letter 'A' - 'Z' and the numerics '0' - '9', all encoded uppercase letter 'A' - 'Z' and the numerics '0' - '9',
in ASCII, with the restriction that the first character all encoded in ASCII, with the restriction that the
of each must be a letter. Trailing blanks are not allowed. first character of each must be a letter. Trailing
blanks are not allowed.
Earlier versions of SNA permitted three additional Earlier versions of SNA permitted three additional
characters in NetIds and ResNames: '#', '@', and '$'. characters in NetIds and ResNames: '#', '@', and '$'.
While this use of these characters has been retired, While this use of these characters has been retired,
a Management Station should still accept them for a Management Station should still accept them for
backward compatibility. backward compatibility.
Note: This Textual Convention is not subject to Note: This Textual Convention is not subject to
internationalization, and does not use the character internationalization, and does not use the character
encodings used by the Utf8String Textual Convention." encodings used by the Utf8String Textual Convention."
SYNTAX OCTET STRING (SIZE(0..17)) SYNTAX OCTET STRING (SIZE(0..17))
Tn3270eAddrType ::= TEXTUAL-CONVENTION Tn3270eAddrType ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The textual convention for defining the type of an Client "The textual convention for defining the type of a
Address." client address. The enumeration value unknown(0) is
usually used to indicate that no actual address is
present."
SYNTAX INTEGER { SYNTAX INTEGER {
unknown(0), unknown(0),
Expires May 1998 [Page 8]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
ipv4(1), ipv4(1),
ipv6(2) ipv6(2)
} }
Tn3270ResourceType ::= TEXTUAL-CONVENTION Tn3270ResourceType ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The type of resource defined by a resource pool. Refer "The type of resource defined by a resource pool. Refer
to tn3270eResPoolTable." to tn3270eResPoolTable."
SYNTAX INTEGER { SYNTAX INTEGER {
other(0), other(0),
lu(1), lu(1),
printer(2) printer(2)
} }
Tn3270eTAddress ::= TEXTUAL-CONVENTION Tn3270eTAddress ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Denotes an Client Address. The type of Client Address is "Denotes a client address. The type of client
determined by use of the Tn3270eAddrType Textual address is determined by use of the Tn3270eAddrType
Convention. textual convention. The length in octets of a
The length in octets of a Tn3270eTAddress object is: Tn3270eTAddress object is:
Tn3270eAddrType ENUM Tn3270eAddrType Address Length
unknown(0) not known, must look at the unknown(0) not specified or unknown;
actual length of the the actual length of the
Tn3270eTAddress OCTET STRING. Tn3270eTAddress octet string
indicates if an address
is present
ipv4(1) 4 OCTETS ipv4(1) 4 OCTETS
ipv6(2) 16 OCTETS ipv6(2) 16 OCTETS
This textual convention is similar to the TAddress TC This textual convention is similar to the TAddress
defined by RFC1903 except that it allows a zero length TC defined by RFC1903 except that it allows a
OCTET STRING and is not a full transport layer address." zero-length octet string and is not a full transport
layer address."
SYNTAX OCTET STRING (SIZE (0..255)) SYNTAX OCTET STRING (SIZE (0..255))
Tn3270Functions ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention is intended to reflect the
current set of TN3270 and TN3270E functions that can
be negotiated between a server and its client:
RFC856
transmitBinary The sender of this command REQUESTS
permission to begin transmitting, or
confirms that it will now begin transmitting
characters which are to be interpreted
Expires May 1998 [Page 9]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
as 8 bits of binary data by
the receiver of the data.
RFC820
timeMark The sender of this command REQUESTS that
the receiver of this command return a WILL
TIMING-MARK in the data stream at the
'appropriate place' ...
RFC885
endOfRecord The sender of this command requests
permission to begin transmission of the
Telnet END-OF-RECORD (EOR) code when
transmitting data characters, or
the sender of this command confirms it will
now begin transmission of EORs with
transmitted data characters.
RFC1091
terminalType Sender is willing to send terminal type
information in a subsequent sub-negotiation.
RFC1041
tn3270Regime Sender is willing to send list of supported
3270 Regimes in a subsequent sub-negotiation.
RFC1647
scsCtlCodes (Printer sessions only). Allows the use
of the SNA Character Stream (SCS) and SCS
control codes on the session. SCS is
used with LU type 1 SNA sessions.
dataStreamCtl (Printer sessions only). Allows the use
of the standard 3270 data stream. This
corresponds to LU type 3 SNA sessions.
responses Provides support for positive and
negative response handling. Allows the
server to reflect to the client any and
all definite, exception, and no response
requests sent by the host application.
bindImage Allows the server to send the SNA Bind
image and Unbind notification to the
client.
sysreq Allows the client and server to emulate
some (or all, depending on the server) of
the functions of the SYSREQ key in an SNA
environment."
SYNTAX BITS {
transmitBinary(0),-- rfc856
timemark(1), -- rfc860
endOfRecord(2), -- rfc885
terminalType(3), -- rfc1091
tn3270Regime(4), -- rfc1041
scsCtlCodes(5), -- rfc1647
Expires May 1998 [Page 10]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
dataStreamCtl(6), -- rfc1647
responses(7), -- rfc1647
bindImage(8), -- rfc1647
sysreq(9) -- rfc1647
}
Tn3270DeviceTypes ::= TEXTUAL-CONVENTION Tn3270DeviceTypes ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This textual convention defines the list of device types "This textual convention defines the list of device
that can be set as defined by RFC 1647." types that can be set, as defined by RFC 1647."
SYNTAX INTEGER { -- terminals SYNTAX INTEGER { -- terminals
unknown(0), unknown(0),
ibm3278d2(1), -- (24 row x 80 col display) ibm3278d2(1), -- (24 row x 80 col display)
ibm3278d2E(2), -- (24 row x 80 col display) ibm3278d2E(2), -- (24 row x 80 col display)
ibm3278d3(3), -- (32 row x 80 col display) ibm3278d3(3), -- (32 row x 80 col display)
ibm3278d3E(4), -- (32 row x 80 col display) ibm3278d3E(4), -- (32 row x 80 col display)
ibm3278d4(5), -- (43 row x 80 col display) ibm3278d4(5), -- (43 row x 80 col display)
ibm3278d4E(6), -- (43 row x 80 col display) ibm3278d4E(6), -- (43 row x 80 col display)
ibm3278d5(7), -- (27 row x 132 col display) ibm3278d5(7), -- (27 row x 132 col display)
ibm3278d5E(8), -- (27 row x 132 col display) ibm3278d5E(8), -- (27 row x 132 col display)
ibmDynamic(9), -- (no pre-defined display size) ibmDynamic(9), -- (no pre-defined display size)
ibm3287d1(10) -- printers ibm3287d1(10) -- printers
} }
Tn3270eTraceData ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An octet string representing trace data from the
Telnet half of a TN3270E session, from the SNA half,
or from both. The octet string contains a sequence
of trace elements, with order in the octet string
representing order in time of the trace elements,
from earliest to latest.
Each trace element has the following form:
+------+----+----------------------+
!length!type!data !
+------+----+----------------------+
where:
length = one-octet length of the data portion of the
trace element, not including the length and
type octets
type = one-octet code point characterizing the data;
defined values are:
X'01' outbound telnet PDU to the client
X'02' inbound telnet PDU from the client
X'03' outbound SNA data to the host
X'04' inbound SNA data from the host
data = initial part of a PDU.
It is left to implementations to determine how
much of each PDU to return in a trace element.
The zero-length string indicates that no trace
data is available."
SYNTAX OCTET STRING (SIZE (0..256))
-- Top-level structure of the MIB -- Top-level structure of the MIB
tn3270eNotifications OBJECT IDENTIFIER ::= { tn3270eMIB 0 } tn3270eNotifications OBJECT IDENTIFIER ::= { tn3270eMIB 0 }
tn3270eObjects OBJECT IDENTIFIER ::= { tn3270eMIB 1 } tn3270eObjects OBJECT IDENTIFIER ::= { tn3270eMIB 1 }
tn3270eConformance OBJECT IDENTIFIER ::= { tn3270eMIB 3 } tn3270eConformance OBJECT IDENTIFIER ::= { tn3270eMIB 3 }
-- MIB Objects -- MIB Objects
tn3270eSrvrConfTable OBJECT-TYPE tn3270eSrvrConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Tn3270eSrvrConfEntry SYNTAX SEQUENCE OF Tn3270eSrvrConfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table defines the configuration elements for "This table defines the configuration elements for
TN3270E Servers. The number of entries in this table TN3270E servers. The number of entries in this table
is expected to vary depending on the location of the is expected to vary depending on the location of the
table. A particular TN3270E server is expected to table. A particular TN3270E server is expected to
have a single entry. Modeling of the configuration have a single entry. Modeling of the configuration
elements as a table allows multiple elements as a table allows multiple
TN3270E Servers to exist at the same host." TN3270E servers to be serviced by the same SNMP agent."
::= { tn3270eObjects 1 } ::= { tn3270eObjects 1 }
tn3270eSrvrConfEntry OBJECT-TYPE tn3270eSrvrConfEntry OBJECT-TYPE
Expires May 1998 [Page 11]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
SYNTAX Tn3270eSrvrConfEntry SYNTAX Tn3270eSrvrConfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Definition of the configuration elements for a single "Definition of the configuration elements for a single
TN3270E server." TN3270E server."
INDEX { tn3270eSrvrConfIndex } INDEX { tn3270eSrvrConfIndex }
::= { tn3270eSrvrConfTable 1 } ::= { tn3270eSrvrConfTable 1 }
Tn3270eSrvrConfEntry ::= SEQUENCE { Tn3270eSrvrConfEntry ::= SEQUENCE {
tn3270eSrvrConfIndex Unsigned32, tn3270eSrvrConfIndex Unsigned32,
tn3270eSrvrConfInactivityTimeout Unsigned32, tn3270eSrvrConfInactivityTimeout Unsigned32,
tn3270eSrvrConfActivityCheck INTEGER, tn3270eSrvrConfActivityCheck INTEGER,
tn3270eSrvrConfActivityTimeout Unsigned32, tn3270eSrvrConfActivityTimeout Unsigned32,
tn3270eSrvrConfActivityInterval Unsigned32, tn3270eSrvrConfActivityInterval Unsigned32,
tn3270eSrvrFunctionsSupported Tn3270Functions, tn3270eSrvrFunctionsSupported IANATn3270Functions,
tn3270eSrvrConfAdminStatus INTEGER, tn3270eSrvrConfAdminStatus INTEGER,
tn3270eSrvrConfOperStatus INTEGER, tn3270eSrvrConfOperStatus INTEGER,
tn3270eSrvrConfSessionTermState INTEGER, tn3270eSrvrConfSessionTermState INTEGER,
tn3270eSrvrConfSrvrType INTEGER, tn3270eSrvrConfSrvrType INTEGER,
tn3270eSrvrConfContact Utf8String, tn3270eSrvrConfContact SnmpAdminString,
tn3270eSrvrConfRowStatus RowStatus tn3270eSrvrConfRowStatus RowStatus
} }
tn3270eSrvrConfIndex OBJECT-TYPE tn3270eSrvrConfIndex OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the instance of a TN3270E server that "Identifier for a single TN3270E server.
exists at an IP Host. Assignments of tn3270eSrvrConfIndex
values need not be continuous and is implementation Assignment of tn3270eSrvrConfIndex values is left
dependent. Within a host, assignment of entirely up to an implementation. The values
tn3270eSrvrConfIndex values must be unique." need not be contiguous."
::= { tn3270eSrvrConfEntry 1 } ::= { tn3270eSrvrConfEntry 1 }
tn3270eSrvrConfInactivityTimeout OBJECT-TYPE tn3270eSrvrConfInactivityTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..99999999) SYNTAX Unsigned32 (0..99999999)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The inactivity time-out specified in seconds. When a "The inactivity time-out specified in seconds. When a
connection has been inactive for the number of seconds connection has been inactive for the number of seconds
specified by this object it is closed. The default of specified by this object it is closed. The default of
0 means no inactivity time-out." 0 means no inactivity time-out is in effect."
DEFVAL { 0 } DEFVAL { 0 }
::= { tn3270eSrvrConfEntry 2 } ::= { tn3270eSrvrConfEntry 2 }
Expires May 1998 [Page 12]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
tn3270eSrvrConfActivityCheck OBJECT-TYPE tn3270eSrvrConfActivityCheck OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
noCheck(0), noCheck(0),
timeMark(1), timeMark(1),
nop(2) nop(2)
} }
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is intended to enable either timemark or "This object is intended to enable either timemark or
nop processing." nop processing."
DEFVAL { noCheck } DEFVAL { noCheck }
::= { tn3270eSrvrConfEntry 3 } ::= { tn3270eSrvrConfEntry 3 }
tn3270eSrvrConfActivityTimeout OBJECT-TYPE tn3270eSrvrConfActivityTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..99999999) SYNTAX Unsigned32 (1..99999999)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The TIMEMARK or NOP processing time-out specified in seconds. "The TIMEMARK or NOP processing time-out specified in
Note that a value of 0 is not allowed for this object since seconds. Note that a value of 0 is not allowed for
the function that uses this object relies on this object since the function that uses this object
tn3270eSrvrConfActivityCheck for function enablement." relies on tn3270eSrvrConfActivityCheck for function
enablement."
DEFVAL { 600 } -- 10 minutes DEFVAL { 600 } -- 10 minutes
::= { tn3270eSrvrConfEntry 4 } ::= { tn3270eSrvrConfEntry 4 }
tn3270eSrvrConfActivityInterval OBJECT-TYPE tn3270eSrvrConfActivityInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..99999999) SYNTAX Unsigned32 (1..99999999)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The scan interval to be used by a TN3270E server. "The scan interval to be used by a TN3270E server.
TIMEMARK or NOP processing scans the Telnet sessions TIMEMARK or NOP processing scans the Telnet sessions
on the interval provided by this object looking for on the interval provided by this object looking for
sessions that have been idle for more than the value sessions that have been idle for more than the value
provided by tn3270eSrvrConfActivityTimeout. provided by tn3270eSrvrConfActivityTimeout.
Note that a value of 0 is not allowed for this object since Note that a value of 0 is not allowed for this object
the function that uses this object relies on since the function that uses this object relies on
tn3270eSrvrConfActivityCheck for function enablement." tn3270eSrvrConfActivityCheck for function enablement."
DEFVAL { 120 } -- 2 minutes DEFVAL { 120 } -- 2 minutes
::= { tn3270eSrvrConfEntry 5 } ::= { tn3270eSrvrConfEntry 5 }
tn3270eSrvrFunctionsSupported OBJECT-TYPE tn3270eSrvrFunctionsSupported OBJECT-TYPE
SYNTAX Tn3270Functions SYNTAX IANATn3270Functions
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
Expires May 1998 [Page 13]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
DESCRIPTION DESCRIPTION
"This object indicates the functions supported by a "This object indicates the functions supported by a
TN3270E server." TN3270E server."
DEFVAL { { scsCtlCodes, dataStreamCtl, DEFVAL { { scsCtlCodes, dataStreamCtl,
responses, bindImage, sysreq } } responses, bindImage, sysreq } }
::= { tn3270eSrvrConfEntry 6 } ::= { tn3270eSrvrConfEntry 6 }
tn3270eSrvrConfAdminStatus OBJECT-TYPE tn3270eSrvrConfAdminStatus OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
up(1), up(1),
down(2), down(2),
stopImmediate(3) stopImmediate(3)
} }
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The desired state of the TN3270E server: "The desired state of the TN3270E server represented
by this entry in the table:
up(1) - Activate a TN3270E server. up(1) - Activate this TN3270E server.
down(2) - Informs the associating TN3270E server down(2) - Informs the associated TN3270E
to gracefully terminate its processing. server to gracefully terminate
stopImmediate(3) - Informs the associating TN3270E server its processing.
to terminate immediately. stopImmediate(3) - Informs the associated TN3270E
server to terminate itself
immediately.
Implementation as to the exact semantics of either down(2) When a managed system creates an entry in this table,
or stopImmediate(3) processing is left as implementation tn3270eSrvrConfAdminStatus and tn3270eSrvrConfOperStatus
dependent. A TN3270E server that does not distinguish are initialized as up(1) by default.
between down or stopImmediate transitions should not
support stopImmediate." The exact behavior of a server in response to a down(2)
or stopImmediate(3) command is left implementation-
dependent. As an example, a TN3270E server that closes
all of its TN3270 and TN3270E sessions during termination
is typically considered a to have terminated gracefully.
Often a stopImmediate(3) command is used as a last
resort by a system administrator, to attempt to either
bring down a hung TN3270E server or free up its
resources immediately to aid in general system
availability, or to shut down a TN3270E server that is
not recognizing a down(2) request.
A TN3270E server that does not distinguish between
down(2) or stopImmediate(3) transitions should not
support stopImmediate(3)."
DEFVAL { up }
::= { tn3270eSrvrConfEntry 7 } ::= { tn3270eSrvrConfEntry 7 }
tn3270eSrvrConfOperStatus OBJECT-TYPE tn3270eSrvrConfOperStatus OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
up(1), up(1), -- TN3270E server is active
down(2) down(2) -- TN3270E server is not active
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The current operational state of a TN3270E server: "The current operational state of a TN3270E server:
up(1) - The corresponding TN3270E server is active. up(1) - The corresponding TN3270E server is active.
down(2) - The corresponding TN3270E server is inactive." down(2) - The corresponding TN3270E server is not active.
A TN3270E server is considered to be active when it can
accept new client connections. Thus a server in the
process of performing a graceful shutdown returns the
value down(2) in this object. "
DEFVAL { up }
::= { tn3270eSrvrConfEntry 8 } ::= { tn3270eSrvrConfEntry 8 }
tn3270eSrvrConfSessionTermState OBJECT-TYPE tn3270eSrvrConfSessionTermState OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
terminate(1), terminate(1),
Expires May 1998 [Page 14]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
luSessionPend(2), luSessionPend(2),
queueSession(3) queueSession(3)
} }
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The current state for determining what a TN3270E server "The current state for determining what a TN3270E server
should do when a TN3270 Session terminates: should do when a TN3270 Session terminates:
terminate(1) => Terminate TCP connection. terminate(1) => Terminate TCP connection.
luSessionPend(2) => Do not drop the TCP Connection luSessionPend(2) => Do not drop the TCP Connection
associated with a client when their associated with a client when their
TN3270 Session ends. Processing should TN3270 Session ends. Processing
redrive session initialization as if the should redrive session initialization
client was first connecting. as if the client was first connecting.
queueSession(3) => QUEUESESSION deals with CLSDST-Pass. queueSession(3) => QUEUESESSION deals with CLSDST-Pass.
An example is the easiest explanation. An example is the easiest explanation.
Assume APPL1 does a CLSDST-Pass Assume APPL1 does a CLSDST-Pass
to APPL2. Then the client logs off APPL to APPL2. Then the client logs off
Without QUEUESESSION the connection APPL without QUEUESESSION the
would now be broken. With QUEUESESSION connection would now be broken. With
the TN3270E server keeps the LU around QUEUESESSION the TN3270E server keeps
after getting the APPL2 unbind waiting the LU around after getting the APPL2
for a bind from APPL1." unbind waiting for a bind from APPL1."
DEFVAL { terminate } DEFVAL { terminate }
::= { tn3270eSrvrConfEntry 9 } ::= { tn3270eSrvrConfEntry 9 }
tn3270eSrvrConfSrvrType OBJECT-TYPE tn3270eSrvrConfSrvrType OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
unknown(0),
host(1), host(1),
gateway(2) gateway(2)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the type of TN3270E server. "This object indicates the type of TN3270E server.
The existence of MIB tables and objects that will be The existence of MIB tables and objects that will be
defined by follow-on MIBs may be predicated on whether the defined by follow-on MIBs may be predicated on whether
TN3270E server can be local to the same host as a the TN3270E server can be local to the same host as a
Target Application (host(1)) or will always be remote target application (host(1)) or will always be remote
(gateway(2))." (gateway(2)).
A host TN3270E server refers to an implementation where
the TN3270E server is collocated with the Systems
Network Architecture (SNA) System Services Control Point
(SSCP) for the dependent Secondary Logical Units (SLUs)
that the server makes available to its clients for
connecting into an SNA network.
A gateway TN3270E server resides on an SNA node other
than an SSCP, either an SNA type 2.0 node or an APPN node
acting in the role of a Dependent LU Requester (DLUR).
Host and gateway TN3270E server implementations typically
differ greatly as to their internal implementation and
system definition (SYSDEF) requirements."
::= { tn3270eSrvrConfEntry 10 } ::= { tn3270eSrvrConfEntry 10 }
tn3270eSrvrConfContact OBJECT-TYPE tn3270eSrvrConfContact OBJECT-TYPE
SYNTAX Utf8String (SIZE(0..255)) SYNTAX SnmpAdminString
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
Expires May 1998 [Page 15]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
DESCRIPTION DESCRIPTION
"This object provides a scratch pad for a TN3270E server "This object provides a scratch pad for a TN3270E
administrator for storing information for later retrieval." server administrator for storing information for
later retrieval."
::= { tn3270eSrvrConfEntry 11 } ::= { tn3270eSrvrConfEntry 11 }
tn3270eSrvrConfRowStatus OBJECT-TYPE tn3270eSrvrConfRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object allows entries to be created and deleted in the "This object allows entries to be created and deleted
tn3270eSrvrConfTable. in the tn3270eSrvrConfTable.
An entry in this table is deleted by setting this object When a tn3270eSrvrConfEntry is deleted (by setting
to destroy(6)." this object to destroy(6)), this has the side-effect
of removing all the associated entries (i.e., those
having the same tn3270eSrvrConfIndex) from the
tn3270eSrvrPortTable, the tn3270eSrvrStatsTable, the
tn3270eClientGroupTable, the tn3270eResPoolTable,
the tn3270eSnaMapTable, the tn3270eClientResMapTable,
and the tn3270eResMapTable. All entries in the
tn3270eTcpConnTable that belong to a TN3270E server
that has been deleted MUST also be removed.
In other words, a tn3270eSrvrConfEntry must exist for
a TN3270E server in order for it to have entries in
any of the other tables defined by this MIB."
REFERENCE REFERENCE
"RFC 1903, 'Textual Conventions for version 2 of the Simple "RFC 1903, 'Textual Conventions for version 2 of the
Network Management Protocol (SNMPv2).'" Simple Network Management Protocol (SNMPv2).'"
::= { tn3270eSrvrConfEntry 12 } ::= { tn3270eSrvrConfEntry 12 }
tn3270eSrvrPortTable OBJECT-TYPE tn3270eSrvrPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Tn3270eSrvrPortEntry SYNTAX SEQUENCE OF Tn3270eSrvrPortEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table defines the TCP ports associated with TN3270E "This table defines the TCP ports associated with
Servers." TN3270E servers. No entry in this table SHALL exist
without a corresponding (same tn3270eSrvrConfIndex)
entry in the tn3270eSrvrConfTable existing."
::= { tn3270eObjects 2 } ::= { tn3270eObjects 2 }
tn3270eSrvrPortEntry OBJECT-TYPE tn3270eSrvrPortEntry OBJECT-TYPE
SYNTAX Tn3270eSrvrPortEntry SYNTAX Tn3270eSrvrPortEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Definition of a single TCP port assignment to a "Definition of a single TCP port assignment to a
TN3270E server." TN3270E server. Assignment of a port on a local
address basis is enabled though use of
tn3270eSrvrPortAddrType and tn3270eSrvrPortAddress.
A TCP port assignment that is not restricted to
a local address SHALL specify a tn3270eSrvrPortAddrType
of unknown(0), and SHALL use a zero-length octet string
for the tn3270eSrvrPortAddress."
INDEX { INDEX {
tn3270eSrvrConfIndex, tn3270eSrvrConfIndex,
tn3270eSrvrPort, tn3270eSrvrPort,
tn3270eSrvrPortAddrType, tn3270eSrvrPortAddrType,
tn3270eSrvrPortAddress tn3270eSrvrPortAddress
} }
::= { tn3270eSrvrPortTable 1 } ::= { tn3270eSrvrPortTable 1 }
Tn3270eSrvrPortEntry ::= SEQUENCE { Tn3270eSrvrPortEntry ::= SEQUENCE {
tn3270eSrvrPort Unsigned32, tn3270eSrvrPort Unsigned32,
tn3270eSrvrPortAddrType Tn3270eAddrType, tn3270eSrvrPortAddrType Tn3270eAddrType,
tn3270eSrvrPortAddress Tn3270eTAddress, tn3270eSrvrPortAddress Tn3270eTAddress,
Expires May 1998 [Page 16]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
tn3270eSrvrPortRowStatus RowStatus tn3270eSrvrPortRowStatus RowStatus
} }
tn3270eSrvrPort OBJECT-TYPE tn3270eSrvrPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535) SYNTAX Unsigned32 (0..65535)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates a port assigned to a server." "Indicates a port assigned to a server."
::= { tn3270eSrvrPortEntry 1 } ::= { tn3270eSrvrPortEntry 1 }
tn3270eSrvrPortAddrType OBJECT-TYPE tn3270eSrvrPortAddrType OBJECT-TYPE
SYNTAX Tn3270eAddrType SYNTAX Tn3270eAddrType
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the type of the Client Address represented in "Indicates the type of an address local to the host on
tn3270eSrvrPortAddress." which the TN3270E server resides that is represented
in tn3270eSrvrPortAddress. A value of unknown(0)
SHALL be used for this object when the port is not
to be restricted to a local address."
::= { tn3270eSrvrPortEntry 2 } ::= { tn3270eSrvrPortEntry 2 }
tn3270eSrvrPortAddress OBJECT-TYPE tn3270eSrvrPortAddress OBJECT-TYPE
SYNTAX Tn3270eTAddress SYNTAX Tn3270eTAddress
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Client Address associated with a TN3270E server port. "A local address on the host that a TN3270E server
tn3270eClientGroupAddrType indicates the address type resides on that is associated with a TCP port that
(ipv4 or ipv6 for example)." is to be used or is in use by a TN3270E server.
tn3270eClientGroupAddrType indicates the
address type (ipv4 or ipv6 for example).
A zero-length octet string SHALL be used as the
value of this object when a local address isn't
being specified."
::= { tn3270eSrvrPortEntry 3 } ::= { tn3270eSrvrPortEntry 3 }
tn3270eSrvrPortRowStatus OBJECT-TYPE tn3270eSrvrPortRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object allows entries to be created and deleted in the "This object allows entries to be created and deleted
tn3270eSrvrPortTable. in the tn3270eSrvrPortTable.
An entry in this table is deleted by setting this object An entry in this table is deleted by setting this object
to destroy(6)." to destroy(6). Deletion of a tn3270eSrvrPortEntry has
no effect on any other table entry defined by this MIB."
REFERENCE REFERENCE
"RFC 1903, 'Textual Conventions for version 2 of the Simple "RFC 1903, 'Textual Conventions for version 2 of the
Network Management Protocol (SNMPv2).'" Simple Network Management Protocol (SNMPv2).'"
::= { tn3270eSrvrPortEntry 4 } ::= { tn3270eSrvrPortEntry 4 }
tn3270eSrvrStatsTable OBJECT-TYPE tn3270eSrvrStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Tn3270eSrvrStatsEntry SYNTAX SEQUENCE OF Tn3270eSrvrStatsEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
Expires May 1998 [Page 17]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table defines a set of statistics concerning "This table defines a set of statistics concerning
global TN3270E server performance." TN3270E server performance.
No entry in this table SHALL exist without
a corresponding (same tn3270eSrvrConfIndex) entry in
the tn3270eSrvrConfTable existing."
::= { tn3270eObjects 3 } ::= { tn3270eObjects 3 }
tn3270eSrvrStatsEntry OBJECT-TYPE tn3270eSrvrStatsEntry OBJECT-TYPE
SYNTAX Tn3270eSrvrStatsEntry SYNTAX Tn3270eSrvrStatsEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Collection of a set of statistic objects for a single "A collection of statistical objects for a single
TN3270 server. An entry can be global with respect to TN3270 server. An entry can represent the total
a single TN3270E server or be specified at a port level. activity of the server, or it can represent
Refer to the text description for tn3270eSrvrStatsPort. the activity occurring at the server on either
a port or port-and-local-address basis.
Refer to the text description for tn3270eSrvrPortEntry.
It is possible that a TN3270E server implementation may Collection of the statistics represented by the objects
not be structured to support resource usage on a port basis in this table is not mandatory. An implementation may
but provide statistics via an entry in this table for limit itself to keeping global statistics for a TN3270E
each port. The recommended approach for this is to server. The indexing for the row containing these
provide a global entry (a value of 0 for global server statistics is as follows:
tn3270eSrvrStatsPort) with:
tn3270eSrvrConfIndex value identifying the server
tn3270eSrvrPort 0
tn3270eSrvrPortAddrType unknown(0)
tn3270eSrvrPortAddress zero-length octet string.
The values of the following objects are implementation-
dependent for statistics that are being kept on either
a port or port-and-local-address basis:
tn3270eSrvrStatsMaxLus tn3270eSrvrStatsMaxLus
tn3270eSrvrStatsMaxLus tn3270eSrvrStatsMaxLus
tn3270eSrvrStatsLusInUse tn3270eSrvrStatsInUseLus
tn3270eSrvrStatsSpareLus tn3270eSrvrStatsSpareLus
tn3270eSrvrStatsMaxPtrs tn3270eSrvrStatsMaxPtrs
tn3270eSrvrStatsPtrsInUse tn3270eSrvrStatsInUsePtrs
tn3270eSrvrStatsSparePtrs tn3270eSrvrStatsSparePtrs
set at this layer but set to zero at the port layer." A TN3270E server that doesn't allow assignment of the
INDEX { tn3270eSrvrConfIndex, tn3270eSrvrStatsPort } resources being reported on by these objects on either
a port or port-and-local-address basis should use the
values that would be associated with an entire TN3270E
server."
INDEX {
tn3270eSrvrConfIndex,
tn3270eSrvrPort,
tn3270eSrvrPortAddrType,
tn3270eSrvrPortAddress
}
::= { tn3270eSrvrStatsTable 1 } ::= { tn3270eSrvrStatsTable 1 }
Tn3270eSrvrStatsEntry ::= SEQUENCE { Tn3270eSrvrStatsEntry ::= SEQUENCE {
tn3270eSrvrStatsPort Unsigned32,
tn3270eSrvrStatsUpTime TimeTicks, tn3270eSrvrStatsUpTime TimeTicks,
tn3270eSrvrStatsMaxLus Unsigned32, tn3270eSrvrStatsMaxLus Unsigned32,
tn3270eSrvrStatsLusInUse Gauge32, tn3270eSrvrStatsInUseLus Gauge32,
tn3270eSrvrStatsSpareLus Gauge32, tn3270eSrvrStatsSpareLus Gauge32,
tn3270eSrvrStatsMaxPtrs Unsigned32, tn3270eSrvrStatsMaxPtrs Unsigned32,
tn3270eSrvrStatsPtrsInUse Gauge32, tn3270eSrvrStatsInUsePtrs Gauge32,
tn3270eSrvrStatsSparePtrs Gauge32, tn3270eSrvrStatsSparePtrs Gauge32,
tn3270eSrvrStatsConnectsIn Counter32, tn3270eSrvrStatsInConnects Counter32,
tn3270eSrvrStatsConnRejects Counter32, tn3270eSrvrStatsConnRejects Counter32,
tn3270eSrvrStatsDisconnects Counter32, tn3270eSrvrStatsDisconnects Counter32,
tn3270eSrvrStatsOctetsIn Counter64, tn3270eSrvrStatsHCInOctets Counter64,
tn3270eSrvrStatsInOctets Counter32,
Expires May 1998 [Page 18]~ tn3270eSrvrStatsHCOutOctets Counter64,
tn3270eSrvrStatsOutOctets Counter32
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
tn3270eSrvrStatsOctetsInLow Counter32,
tn3270eSrvrStatsOctetsOut Counter64,
tn3270eSrvrStatsOctetsOutLow Counter32
} }
tn3270eSrvrStatsPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the port that the corresponding statistics are
for. Implementation of collection of these statistics
on a port basis is not mandatory. An implementation may
limit itself to keeping this data on a global basis by
using a value of 0."
::= { tn3270eSrvrStatsEntry 1 }
tn3270eSrvrStatsUpTime OBJECT-TYPE tn3270eSrvrStatsUpTime OBJECT-TYPE
SYNTAX TimeTicks SYNTAX TimeTicks
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates when either usage of a associating port becomes "Indicates when activity begins for a TN3270E server
active (tn3270eSrvrStatsPort non-zero) or if the entry as represented by an entry in this table. The value
is being kept on a global basis the time that the TN3270E of this object does not get reset based on port usage
server becomes active. The value of this object does not status changes or changes to tn3270eSrvrConfOperStatus."
get reset based on port usage status changes or changes
to tn3270eSrvrConfOperStatus."
::= { tn3270eSrvrStatsEntry 2 } ::= { tn3270eSrvrStatsEntry 2 }
tn3270eSrvrStatsMaxLus OBJECT-TYPE tn3270eSrvrStatsMaxLus OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "LUs"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the maximum number of LUs for use by a "Indicates the maximum number of LUs for use by a
TN3270E server. The granularity of this data can be TN3270E server."
either global (corresponding tn3270eSrvrStatsPort index
equal to 0) or on a port basis."
::= { tn3270eSrvrStatsEntry 3 } ::= { tn3270eSrvrStatsEntry 3 }
tn3270eSrvrStatsLusInUse OBJECT-TYPE tn3270eSrvrStatsInUseLus OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
UNITS "LUs"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the current number of LUs in use by a "Indicates the current number of LUs in use by a
TN3270E server. The granularity of this data can be TN3270E server."
Expires May 1998 [Page 19]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
either global (corresponding tn3270eSrvrStatsPort index
equal to 0) or on a port basis."
::= { tn3270eSrvrStatsEntry 4 } ::= { tn3270eSrvrStatsEntry 4 }
tn3270eSrvrStatsSpareLus OBJECT-TYPE tn3270eSrvrStatsSpareLus OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
UNITS "LUs"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the number of free LUs for a particular TN3270E "Indicates the number of free LUs for a particular
server. It is possible that the difference between TN3270E server. It is possible that the difference
tn3270eSrvrStatsMaxLus and tn3270eSrvrStatsLusInUse does between tn3270eSrvrStatsMaxLus and
not equal tn3270eSrvrStatsSpareLus. An LU may exist tn3270eSrvrStatsInUseLus does not equal
but not be useable by an client connection. tn3270eSrvrStatsSpareLus. An LU may exist
The granularity of this data can be but not be usable by an client connection."
either global (corresponding tn3270eSrvrStatsPort index
equal to 0) or on a port basis."
::= { tn3270eSrvrStatsEntry 5 } ::= { tn3270eSrvrStatsEntry 5 }
tn3270eSrvrStatsMaxPtrs OBJECT-TYPE tn3270eSrvrStatsMaxPtrs OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "Printer Resources"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the maximum number of Printer Resources for "Indicates the maximum number of Printer Resources for
use by a TN3270E server. The granularity of this data use by a TN3270E server."
can be either global (corresponding tn3270eSrvrStatsPort
index equal to 0) or on a port basis."
::= { tn3270eSrvrStatsEntry 6 } ::= { tn3270eSrvrStatsEntry 6 }
tn3270eSrvrStatsPtrsInUse OBJECT-TYPE tn3270eSrvrStatsInUsePtrs OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
UNITS "Printer Resources"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the current number of Printer Resources in "Indicates the current number of Printer Resources in
use by a TN3270E server. The granularity of this data use by a TN3270E server."
can be either global (corresponding tn3270eSrvrStatsPort
index equal to 0) or on a port basis."
::= { tn3270eSrvrStatsEntry 7 } ::= { tn3270eSrvrStatsEntry 7 }
tn3270eSrvrStatsSparePtrs OBJECT-TYPE tn3270eSrvrStatsSparePtrs OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
UNITS "Spare Printer Resources"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the number of free Printer Resources for a "Indicates the number of free Printer Resources for a
particular TN3270E server. It is possible that the particular TN3270E server. It is possible that the
Expires May 1998 [Page 20]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
difference between tn3270eSrvrStatsMaxPtrs and difference between tn3270eSrvrStatsMaxPtrs and
tn3270eSrvrStatsPtrsInUse does not equal tn3270eSrvrStatsInUsePtrs does not equal
tn3270eSrvrStatsSparePtrs. A Printer resource may tn3270eSrvrStatsSparePtrs. A Printer resource may
exist but not be useable by an client connection. exist but not be usable by an client connection."
The granularity of this data
can be either global (corresponding tn3270eSrvrStatsPort
index equal to 0) or on a port basis."
::= { tn3270eSrvrStatsEntry 8 } ::= { tn3270eSrvrStatsEntry 8 }
tn3270eSrvrStatsConnectsIn OBJECT-TYPE tn3270eSrvrStatsInConnects OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "connections"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the number of client connections received by a "Indicates the number of client (TCP) connections that
TN3270E server. The granularity of this data succeeded at a TN3270E server. tn3270eSrvrStatsConnRejects
can be either global (corresponding tn3270eSrvrStatsPort represents failed connection attempts."
index equal to 0) or on a port basis."
::= { tn3270eSrvrStatsEntry 9 } ::= { tn3270eSrvrStatsEntry 9 }
tn3270eSrvrStatsConnRejects OBJECT-TYPE tn3270eSrvrStatsConnRejects OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "connection attempts"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the number of client connections rejected during "Indicates the number of (TCP) connections rejected
connection setup. An example of this is when no LU or during connection setup at a TN3270E server. An example
Printer resource is available to associate with the of this is when no LU or printer resource is available
TCP Connection of an client. The granularity of this data to associate with the the client's TCP connection."
can be either global (corresponding tn3270eSrvrStatsPort
index equal to 0) or on a port basis."
::= { tn3270eSrvrStatsEntry 10 } ::= { tn3270eSrvrStatsEntry 10 }
tn3270eSrvrStatsDisconnects OBJECT-TYPE tn3270eSrvrStatsDisconnects OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "disconnections"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the number of client connections disconnected by a "Indicates all of the (TCP) connections that were
TN3270E server. The granularity of this data disconnected at a TN3270E server."
can be either global (corresponding tn3270eSrvrStatsPort
index equal to 0) or on a port basis."
::= { tn3270eSrvrStatsEntry 11 } ::= { tn3270eSrvrStatsEntry 11 }
tn3270eSrvrStatsOctetsIn OBJECT-TYPE tn3270eSrvrStatsHCInOctets OBJECT-TYPE
SYNTAX Counter64 SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
Expires May 1998 [Page 21]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
DESCRIPTION DESCRIPTION
"Indicates the number of octets received from TN3270 "Indicates the number of octets received from TN3270
and TN3270E Clients. The granularity and TN3270E clients."
of this data can be either global (corresponding
tn3270eSrvrStatsPort index equal to 0) or on a port basis."
::= { tn3270eSrvrStatsEntry 12 } ::= { tn3270eSrvrStatsEntry 12 }
tn3270eSrvrStatsOctetsInLow OBJECT-TYPE tn3270eSrvrStatsInOctets OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Low order 32 bits of tn3270eSrvrStatsOctetsIn." "Low order 32 bits of tn3270eSrvrStatsHCInOctets."
::= { tn3270eSrvrStatsEntry 13 } ::= { tn3270eSrvrStatsEntry 13 }
tn3270eSrvrStatsOctetsOut OBJECT-TYPE tn3270eSrvrStatsHCOutOctets OBJECT-TYPE
SYNTAX Counter64 SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the number of octets sent to TN3270 "Indicates the number of octets sent to TN3270
and TN3270E Clients. The granularity and TN3270E clients."
of this data can be either global (corresponding
tn3270eSrvrStatsPort index equal to 0) or on a port basis."
::= { tn3270eSrvrStatsEntry 14 } ::= { tn3270eSrvrStatsEntry 14 }
tn3270eSrvrStatsOctetsOutLow OBJECT-TYPE tn3270eSrvrStatsOutOctets OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Low order 32 bits of tn3270eSrvrStatsOctetsOut." "Low order 32 bits of tn3270eSrvrStatsHCOutOctets."
::= { tn3270eSrvrStatsEntry 15 } ::= { tn3270eSrvrStatsEntry 15 }
tn3270eClientGroupTable OBJECT-TYPE tn3270eClientGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF Tn3270eClientGroupEntry SYNTAX SEQUENCE OF Tn3270eClientGroupEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table defines client address groupings for use by a "This table defines client address groupings for use
TN3270E server." by a TN3270E server.
No entry in this table SHALL exist without
a corresponding (same tn3270eSrvrConfIndex) entry in
the tn3270eSrvrConfTable existing."
::= { tn3270eObjects 4 } ::= { tn3270eObjects 4 }
tn3270eClientGroupEntry OBJECT-TYPE tn3270eClientGroupEntry OBJECT-TYPE
SYNTAX Tn3270eClientGroupEntry SYNTAX Tn3270eClientGroupEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Definition of a single client address entry. All
Expires May 1998 [Page 22]~ entries with the same first two indexes,
tn3270eSrvrConfIndex and tn3270eClientGroupName, are
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997 considered to be in the same client group."
"Definition of a single client address entry. All entries with
the same first two indexes, tn3270eSrvrConfIndex and
tn3270eClientGroupName, are considered to be in the same
client group."
INDEX { tn3270eSrvrConfIndex, INDEX { tn3270eSrvrConfIndex,
tn3270eClientGroupName, tn3270eClientGroupName,
tn3270eClientGroupAddrType, tn3270eClientGroupAddrType,
tn3270eClientGroupAddress } tn3270eClientGroupAddress }
::= { tn3270eClientGroupTable 1 } ::= { tn3270eClientGroupTable 1 }
Tn3270eClientGroupEntry ::= SEQUENCE { Tn3270eClientGroupEntry ::= SEQUENCE {
tn3270eClientGroupName Utf8String, tn3270eClientGroupName Utf8String,
tn3270eClientGroupAddrType Tn3270eAddrType, tn3270eClientGroupAddrType Tn3270eAddrType,
tn3270eClientGroupAddress Tn3270eTAddress, tn3270eClientGroupAddress Tn3270eTAddress,
tn3270eClientGroupSubnetMask IpAddress, tn3270eClientGroupSubnetMask IpAddress,
tn3270eClientGroupPfxLength Unsigned32, tn3270eClientGroupPfxLength Unsigned32,
tn3270eClientGroupRowStatus RowStatus } tn3270eClientGroupRowStatus RowStatus }
tn3270eClientGroupName OBJECT-TYPE tn3270eClientGroupName OBJECT-TYPE
SYNTAX Utf8String (SIZE(1..24)) SYNTAX Utf8String (SIZE(1..24))
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The name of a client group." "The name of a client group. Note: client group
names are required to be unique only with respect
to a single TN3270E server."
::= { tn3270eClientGroupEntry 1 } ::= { tn3270eClientGroupEntry 1 }
tn3270eClientGroupAddrType OBJECT-TYPE tn3270eClientGroupAddrType OBJECT-TYPE
SYNTAX Tn3270eAddrType SYNTAX Tn3270eAddrType
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the type of the address represented in "Indicates the type of the address represented in
tn3270eClientGroupAddress." tn3270eClientGroupAddress."
::= { tn3270eClientGroupEntry 2 } ::= { tn3270eClientGroupEntry 2 }
tn3270eClientGroupAddress OBJECT-TYPE tn3270eClientGroupAddress OBJECT-TYPE
SYNTAX Tn3270eTAddress SYNTAX Tn3270eTAddress
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The client address of a member of a client group. The value "The client address of a member of a client group.
of tn3270eClientGroupAddrType indicates the address The value of tn3270eClientGroupAddrType indicates
type (ipv4 or ipv6 for example)." the address type (ipv4 or ipv6 for example)."
::= { tn3270eClientGroupEntry 3 } ::= { tn3270eClientGroupEntry 3 }
tn3270eClientGroupSubnetMask OBJECT-TYPE tn3270eClientGroupSubnetMask OBJECT-TYPE
SYNTAX IpAddress SYNTAX IpAddress
MAX-ACCESS read-create MAX-ACCESS read-create
Expires May 1998 [Page 23]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The corresponding subnet mask associated with "The corresponding subnet mask associated with
tn3270eClientGroupAddress. A single IP Address is tn3270eClientGroupAddress. A single IP address is
represented by having this object contain the value represented by having this object contain the value
of 255.255.255.255. This object is valid only if of 255.255.255.255. This object's value is
tn3270eClientGroupAddrType has a value of ipv4(1)." meaningful only if tn3270eClientGroupAddrType has a
value of ipv4(1)."
DEFVAL { 'FFFFFFFF'H } DEFVAL { 'FFFFFFFF'H }
::= { tn3270eClientGroupEntry 4 } ::= { tn3270eClientGroupEntry 4 }
tn3270eClientGroupPfxLength OBJECT-TYPE tn3270eClientGroupPfxLength OBJECT-TYPE
SYNTAX Unsigned32 (0..128) SYNTAX Unsigned32 (0..128)
UNITS "bits"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The corresponding IPv6 network prefix length. This "The corresponding IPv6 network prefix length. This
object is valid only if tn3270eClientGroupAddrType object is valid only if tn3270eClientGroupAddrType
has a value of ipv6(2)." has a value of ipv6(2)."
DEFVAL { 0 } DEFVAL { 0 }
::= { tn3270eClientGroupEntry 5 } ::= { tn3270eClientGroupEntry 5 }
tn3270eClientGroupRowStatus OBJECT-TYPE tn3270eClientGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object allows entries to be created and deleted in the "This object allows entries to be created and deleted
tn3270eClientGroupTable. in the tn3270eClientGroupTable.
An entry in this table is deleted by setting this object An entry in this table is deleted by setting this object
to destroy(6)." to destroy(6). This has the side-effect of removing
any entries in the tn3270eClientResMapTable for the client
group being removed (tn3270eSrvrConfIndex values should be
the same and tn3270eClientGroupName should match
tn3270eClientResMapClientGroupName.)"
REFERENCE REFERENCE
"RFC 1903, 'Textual Conventions for version 2 of the Simple "RFC 1903, 'Textual Conventions for version 2 of the
Network Management Protocol (SNMPv2).'" Simple Network Management Protocol (SNMPv2).'"
::= { tn3270eClientGroupEntry 6 } ::= { tn3270eClientGroupEntry 6 }
tn3270eResPoolTable OBJECT-TYPE tn3270eResPoolTable OBJECT-TYPE
SYNTAX SEQUENCE OF Tn3270eResPoolEntry SYNTAX SEQUENCE OF Tn3270eResPoolEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table defines resource groupings; the term "This table defines resource groupings; the term
'pool' is used as it is defined by RFC 1647." 'pool' is used as it is defined by RFC 1647.
No entry in this table SHALL exist without
a corresponding (same tn3270eSrvrConfIndex) entry in
the tn3270eSrvrConfTable existing."
::= { tn3270eObjects 5 } ::= { tn3270eObjects 5 }
tn3270eResPoolEntry OBJECT-TYPE tn3270eResPoolEntry OBJECT-TYPE
SYNTAX Tn3270eResPoolEntry SYNTAX Tn3270eResPoolEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
Expires May 1998 [Page 24]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Definition of a single resource pool member. All entries "Definition of a single resource pool member. All entries
with the same first two indexes, tn3270eSrvrConfIndex and with the same first two indexes, tn3270eSrvrConfIndex and
tn3270eResPoolName, are considered to be in the same pool." tn3270eResPoolName, are considered to be in the same pool."
INDEX { tn3270eSrvrConfIndex, INDEX { tn3270eSrvrConfIndex,
tn3270eResPoolName, tn3270eResPoolName,
tn3270eResPoolElementName } tn3270eResPoolElementName }
::= { tn3270eResPoolTable 1 } ::= { tn3270eResPoolTable 1 }
skipping to change at line 1270 skipping to change at page 25, line 37
tn3270eResPoolName Utf8String, tn3270eResPoolName Utf8String,
tn3270eResPoolElementName SnaResourceName, tn3270eResPoolElementName SnaResourceName,
tn3270eResPoolElementType Tn3270ResourceType, tn3270eResPoolElementType Tn3270ResourceType,
tn3270eResPoolRowStatus RowStatus } tn3270eResPoolRowStatus RowStatus }
tn3270eResPoolName OBJECT-TYPE tn3270eResPoolName OBJECT-TYPE
SYNTAX Utf8String (SIZE(1..24)) SYNTAX Utf8String (SIZE(1..24))
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The name of a resource pool.." "The name of a resource pool."
::= { tn3270eResPoolEntry 1 } ::= { tn3270eResPoolEntry 1 }
tn3270eResPoolElementName OBJECT-TYPE tn3270eResPoolElementName OBJECT-TYPE
SYNTAX SnaResourceName SYNTAX SnaResourceName
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The name of a member of a resource pool." "The name of a member of a resource pool."
::= { tn3270eResPoolEntry 2 } ::= { tn3270eResPoolEntry 2 }
skipping to change at line 1294 skipping to change at page 26, line 6
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The type of the entity in a resource pool." "The type of the entity in a resource pool."
::= { tn3270eResPoolEntry 3 } ::= { tn3270eResPoolEntry 3 }
tn3270eResPoolRowStatus OBJECT-TYPE tn3270eResPoolRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object allows entries to be created and deleted in the "This object allows entries to be created and deleted in
tn3270eResPoolTable. the tn3270eResPoolTable.
Expires May 1998 [Page 25]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
An entry in this table is deleted by setting this object An entry in this table is deleted by setting this object
to destroy(6)." to destroy(6). When all entries in this table associated
with the same tn3270eResPoolElementName have been removed,
then any associated (tn3270eResPoolElementName matching
tn3270eClientResMapPoolName with same tn3270eSrvrConfIndex
values) entries in the tn3270eClientResMapTable SHALL
also be removed."
REFERENCE REFERENCE
"RFC 1903, 'Textual Conventions for version 2 of the Simple "RFC 1903, 'Textual Conventions for version 2 of the
Network Management Protocol (SNMPv2).'" Simple Network Management Protocol (SNMPv2).'"
::= { tn3270eResPoolEntry 4 } ::= { tn3270eResPoolEntry 4 }
tn3270eSnaMapTable OBJECT-TYPE tn3270eSnaMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF Tn3270eSnaMapEntry SYNTAX SEQUENCE OF Tn3270eSnaMapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table provide a mapping from the name by which "This table provide a mapping from the name by which
a secondary LU is known in the SNA network to the a secondary LU is known in the SNA network to the
name by which it is known locally at the TN3270e name by which it is known locally at the TN3270e
server. This latter name serves as an index into server. This latter name serves as an index into
the tn3270eResPoolTable and the tn3270eResMapTable." the tn3270eResPoolTable and the tn3270eResMapTable.
No entry in this table SHALL exist without
a corresponding (same tn3270eSrvrConfIndex) entry in
the tn3270eSrvrConfTable existing."
::= { tn3270eObjects 6 } ::= { tn3270eObjects 6 }
tn3270eSnaMapEntry OBJECT-TYPE tn3270eSnaMapEntry OBJECT-TYPE
SYNTAX Tn3270eSnaMapEntry SYNTAX Tn3270eSnaMapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Definition of a single mapping from an SSCP-supplied "Definition of a single mapping from an SSCP-supplied
SLU name to a local SLU name." SLU name to a local SLU name."
INDEX { tn3270eSrvrConfIndex, INDEX { tn3270eSrvrConfIndex,
skipping to change at line 1341 skipping to change at page 26, line 58
Tn3270eSnaMapEntry ::= SEQUENCE { Tn3270eSnaMapEntry ::= SEQUENCE {
tn3270eSnaMapSscpSuppliedName SnaResourceName, tn3270eSnaMapSscpSuppliedName SnaResourceName,
tn3270eSnaMapLocalName SnaResourceName, tn3270eSnaMapLocalName SnaResourceName,
tn3270eSnaMapPrimaryLuName SnaResourceName } tn3270eSnaMapPrimaryLuName SnaResourceName }
tn3270eSnaMapSscpSuppliedName OBJECT-TYPE tn3270eSnaMapSscpSuppliedName OBJECT-TYPE
SYNTAX SnaResourceName SYNTAX SnaResourceName
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The name of the secondary LU (SLU) as it is known in the "The name of the secondary LU (SLU) as it is known in
SNA network. This name is sent by the SSCP on the the SNA network. This name is sent by the SSCP on
Activate Logical Unit (ACTLU) request." the Activate Logical Unit (ACTLU) request."
::= { tn3270eSnaMapEntry 1 } ::= { tn3270eSnaMapEntry 1 }
tn3270eSnaMapLocalName OBJECT-TYPE tn3270eSnaMapLocalName OBJECT-TYPE
SYNTAX SnaResourceName SYNTAX SnaResourceName
MAX-ACCESS read-only MAX-ACCESS read-only
Expires May 1998 [Page 26]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The local name of the secondary LU (SLU)." "The local name of the secondary LU (SLU)."
::= { tn3270eSnaMapEntry 2 } ::= { tn3270eSnaMapEntry 2 }
tn3270eSnaMapPrimaryLuName OBJECT-TYPE tn3270eSnaMapPrimaryLuName OBJECT-TYPE
SYNTAX SnaResourceName SYNTAX SnaResourceName
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"When there is a currently active LU-LU session for this "When there is a currently active LU-LU session for
connection, this object returns the primary LU (PLU) name this connection, this object returns the primary LU
from the BIND. When there is no active LU-LU session, or (PLU) name from the BIND. When there is no active
when the PLU name is unavailable for some other reason, LU-LU session, or when the PLU name is unavailable
this object returns the empty string." for some other reason, this object returns a
zero-length octet string."
::= { tn3270eSnaMapEntry 3 } ::= { tn3270eSnaMapEntry 3 }
tn3270eClientResMapTable OBJECT-TYPE tn3270eClientResMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF Tn3270eClientResMapEntry SYNTAX SEQUENCE OF Tn3270eClientResMapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table defines resource pool to client group mappings. "This table defines resource-pool to client-group
Since both the resource pool name and client group name mappings. Since both the resource pool name and client
are included in the index clause of this table, multiple group name are included in the index clause of this
resource pools can be assigned to the same client group. This table, multiple resource pools can be assigned to the
enables use of multiple resource pools for use in client to same client group. This enables use of multiple
resource mapping. Assigning multiple client Groups to the resource pools for use in client to resource mapping.
same resource pool is also allowed, but is not the primary Assigning multiple client Groups to the same resource
purpose for how the indexing is structured. pool is also allowed, but is not the primary purpose
for how the indexing is structured.
Assignment of a resource pool to client group can be Assignment of a resource pool to client group can be
restricted based on TCP port. An index value of 0 for restricted based on TCP port. An index value of 0 for
tn3270eClientResMapClientPort disables restriction of tn3270eClientResMapClientPort disables restriction of
resource assignment based on client target port selection." resource assignment based on client target port
selection.
No entry in this table SHALL exist without
a corresponding (same tn3270eSrvrConfIndex) entry in
the tn3270eSrvrConfTable existing."
::= { tn3270eObjects 7 } ::= { tn3270eObjects 7 }
tn3270eClientResMapEntry OBJECT-TYPE tn3270eClientResMapEntry OBJECT-TYPE
SYNTAX Tn3270eClientResMapEntry SYNTAX Tn3270eClientResMapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Definition of a single resource pool to client group "Definition of a single resource pool to client group
mapping." mapping."
INDEX { tn3270eSrvrConfIndex, INDEX { tn3270eSrvrConfIndex,
tn3270eClientResMapPoolName, tn3270eClientResMapPoolName,
tn3270eClientResMapClientGroupName, tn3270eClientResMapClientGroupName,
tn3270eClientResMapClientPort } tn3270eClientResMapClientPort }
Expires May 1998 [Page 27]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
::= { tn3270eClientResMapTable 1 } ::= { tn3270eClientResMapTable 1 }
Tn3270eClientResMapEntry ::= SEQUENCE { Tn3270eClientResMapEntry ::= SEQUENCE {
tn3270eClientResMapPoolName Utf8String, tn3270eClientResMapPoolName Utf8String,
tn3270eClientResMapClientGroupName Utf8String, tn3270eClientResMapClientGroupName Utf8String,
tn3270eClientResMapClientPort Unsigned32, tn3270eClientResMapClientPort Unsigned32,
tn3270eClientResMapRowStatus RowStatus } tn3270eClientResMapRowStatus RowStatus }
tn3270eClientResMapPoolName OBJECT-TYPE tn3270eClientResMapPoolName OBJECT-TYPE
SYNTAX Utf8String (SIZE(1..24)) SYNTAX Utf8String (SIZE(1..24))
skipping to change at line 1437 skipping to change at page 28, line 41
DESCRIPTION DESCRIPTION
"The name of the client group that is mapped to a "The name of the client group that is mapped to a
resource pool." resource pool."
::= { tn3270eClientResMapEntry 2 } ::= { tn3270eClientResMapEntry 2 }
tn3270eClientResMapClientPort OBJECT-TYPE tn3270eClientResMapClientPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535) SYNTAX Unsigned32 (0..65535)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The port to restrict a resource pool to a client group "The port to restrict a resource pool to a client
mapping. A value of 0 for this objects implies that group mapping. A value of 0 for this objects implies
the mapping is not restricted." that the mapping is not restricted."
::= { tn3270eClientResMapEntry 3 } ::= { tn3270eClientResMapEntry 3 }
tn3270eClientResMapRowStatus OBJECT-TYPE tn3270eClientResMapRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object allows entries to be created and deleted in the "This object allows entries to be created and deleted
tn3270eClientResMapTable. in the tn3270eClientResMapTable.
An entry in this table is deleted by setting this object An entry in this table is deleted by setting this object
to destroy(6)." to destroy(6). Removing an entry from this table doesn't
affect any other table entry defined by this MIB."
REFERENCE REFERENCE
"RFC 1903, 'Textual Conventions for version 2 of the Simple "RFC 1903, 'Textual Conventions for version 2 of the
Network Management Protocol (SNMPv2).'" Simple Network Management Protocol (SNMPv2).'"
Expires May 1998 [Page 28]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
::= { tn3270eClientResMapEntry 4 } ::= { tn3270eClientResMapEntry 4 }
tn3270eResMapTable OBJECT-TYPE tn3270eResMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF Tn3270eResMapEntry SYNTAX SEQUENCE OF Tn3270eResMapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table defines the actual mapping of a resource to "This table defines the actual mapping of a resource
a client Address." to a client address.
No entry in this table SHALL exist without
a corresponding (same tn3270eSrvrConfIndex) entry in
the tn3270eSrvrConfTable existing."
::= { tn3270eObjects 8 } ::= { tn3270eObjects 8 }
tn3270eResMapEntry OBJECT-TYPE tn3270eResMapEntry OBJECT-TYPE
SYNTAX Tn3270eResMapEntry SYNTAX Tn3270eResMapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Definition of the mapping of a Resource Element to "Definition of the mapping of a Resource Element to
a client Address." a client address."
INDEX { tn3270eSrvrConfIndex, INDEX { tn3270eSrvrConfIndex,
tn3270eResMapElementName } tn3270eResMapElementName }
::= { tn3270eResMapTable 1 } ::= { tn3270eResMapTable 1 }
Tn3270eResMapEntry ::= SEQUENCE { Tn3270eResMapEntry ::= SEQUENCE {
tn3270eResMapElementName SnaResourceName, tn3270eResMapElementName SnaResourceName,
tn3270eResMapAddrType Tn3270eAddrType, tn3270eResMapAddrType Tn3270eAddrType,
tn3270eResMapAddress Tn3270eTAddress, tn3270eResMapAddress Tn3270eTAddress,
tn3270eResMapPort Unsigned32, tn3270eResMapPort Unsigned32,
tn3270eResMapElementType Tn3270ResourceType, tn3270eResMapElementType Tn3270ResourceType,
skipping to change at line 1508 skipping to change at page 29, line 57
the resource is known in the SNA network. In this case the resource is known in the SNA network. In this case
the name by which the resource is known in the SNA the name by which the resource is known in the SNA
network is returned in the tn3270eResMapSscpSuppliedName network is returned in the tn3270eResMapSscpSuppliedName
object." object."
::= { tn3270eResMapEntry 1 } ::= { tn3270eResMapEntry 1 }
tn3270eResMapAddrType OBJECT-TYPE tn3270eResMapAddrType OBJECT-TYPE
SYNTAX Tn3270eAddrType SYNTAX Tn3270eAddrType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
Expires May 1998 [Page 29]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
DESCRIPTION DESCRIPTION
"Indicates the type of the client Address represented in "Indicates the type of the client address represented
tn3270eResMapAddress." in tn3270eResMapAddress."
::= { tn3270eResMapEntry 2 } ::= { tn3270eResMapEntry 2 }
tn3270eResMapAddress OBJECT-TYPE tn3270eResMapAddress OBJECT-TYPE
SYNTAX Tn3270eTAddress SYNTAX Tn3270eTAddress
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A client address." "A client address."
::= { tn3270eResMapEntry 3 } ::= { tn3270eResMapEntry 3 }
tn3270eResMapPort OBJECT-TYPE tn3270eResMapPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535) SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A client Port." "A client port."
::= { tn3270eResMapEntry 4 } ::= { tn3270eResMapEntry 4 }
tn3270eResMapElementType OBJECT-TYPE tn3270eResMapElementType OBJECT-TYPE
SYNTAX Tn3270ResourceType SYNTAX Tn3270ResourceType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The type of the associating resource element." "The type of the associated resource element."
::= { tn3270eResMapEntry 5 } ::= { tn3270eResMapEntry 5 }
tn3270eResMapSscpSuppliedName OBJECT-TYPE tn3270eResMapSscpSuppliedName OBJECT-TYPE
SYNTAX SnaResourceName SYNTAX SnaResourceName
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The name of the secondary LU (SLU) as it is known in the "The name of the secondary LU (SLU) as it is known in a
SNA network. This name is sent by the SSCP on the SNA network. This name is sent by the SSCP on the
Activate Logical Unit (ACTLU) request. The value of this Activate Logical Unit (ACTLU) request. The value of
object is the empty string if the tn3270eResMapElementName this object is a zero-length octet string if the
is the same as the SSCP-supplied name." tn3270eResMapElementName is the same as the
SSCP-supplied name."
::= { tn3270eResMapEntry 6 } ::= { tn3270eResMapEntry 6 }
-- Define the set of objects to add to the Tcp Connection Table -- Define the set of objects to supplement the TCP Connection Table
tn3270eTcpConnTable OBJECT-TYPE tn3270eTcpConnTable OBJECT-TYPE
SYNTAX SEQUENCE OF Tn3270eTcpConnEntry SYNTAX SEQUENCE OF Tn3270eTcpConnEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Expires May 1998 [Page 30]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
"Provides a table that has an entry for each TN3270(E) "Provides a table that has an entry for each TN3270(E)
client connection that is active at a TN3270E server. client connection that is active at a TN3270E server.
The table was originally modeled after the tcpConnTable The table was originally modeled after the tcpConnTable
but was changed to support different client Address types but was changed to support different client address types
and to be indexed first by the remote address and port and to be indexed first by the remote address and port
as oppose to local address and port. This is to enable as oppose to local address and port. This is to enable
use of a SNMP GET-NEXT operation using only the remote use of a SNMP GET-NEXT operation using only the remote
address and port." address and port."
::= { tn3270eObjects 9 } ::= { tn3270eObjects 9 }
tn3270eTcpConnEntry OBJECT-TYPE tn3270eTcpConnEntry OBJECT-TYPE
SYNTAX Tn3270eTcpConnEntry SYNTAX Tn3270eTcpConnEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Provides in formation about a single TN3270/TN3270E "Provides in formation about a single TN3270/TN3270E
session. Note: a tn3270eSrvrConfIndex is not needed session. Note: a tn3270eSrvrConfIndex is not needed
in this table since the combination of both remote in this table since the combination of both remote
local addresses and ports is sufficient to local addresses and ports is sufficient to
guarantee uniqueness between TN3270E Servers on the guarantee uniqueness between TN3270E servers that
same or actually different hosts." may or may not be serviced by the same SNMP agent."
INDEX { tn3270eTcpConnRemAddrType, INDEX { tn3270eTcpConnRemAddrType,
tn3270eTcpConnRemAddress, tn3270eTcpConnRemAddress,
tn3270eTcpConnRemPort, tn3270eTcpConnRemPort,
tn3270eTcpConnLocalAddrType, tn3270eTcpConnLocalAddrType,
tn3270eTcpConnLocalAddress, tn3270eTcpConnLocalAddress,
tn3270eTcpConnLocalPort tn3270eTcpConnLocalPort
} }
::= { tn3270eTcpConnTable 1 } ::= { tn3270eTcpConnTable 1 }
Tn3270eTcpConnEntry ::= Tn3270eTcpConnEntry ::=
skipping to change at line 1611 skipping to change at page 31, line 41
tn3270eTcpConnRemPort Unsigned32, tn3270eTcpConnRemPort Unsigned32,
tn3270eTcpConnLocalAddrType Tn3270eAddrType, tn3270eTcpConnLocalAddrType Tn3270eAddrType,
tn3270eTcpConnLocalAddress Tn3270eTAddress, tn3270eTcpConnLocalAddress Tn3270eTAddress,
tn3270eTcpConnLocalPort Unsigned32, tn3270eTcpConnLocalPort Unsigned32,
tn3270eTcpConnLastActivity TimeTicks, tn3270eTcpConnLastActivity TimeTicks,
tn3270eTcpConnBytesIn Counter32, tn3270eTcpConnBytesIn Counter32,
tn3270eTcpConnBytesOut Counter32, tn3270eTcpConnBytesOut Counter32,
tn3270eTcpConnResourceElement SnaResourceName, tn3270eTcpConnResourceElement SnaResourceName,
tn3270eTcpConnResourceType Tn3270ResourceType, tn3270eTcpConnResourceType Tn3270ResourceType,
tn3270eTcpConnDeviceType Tn3270DeviceTypes, tn3270eTcpConnDeviceType Tn3270DeviceTypes,
tn3270eTcpConnFunctions Tn3270Functions, tn3270eTcpConnFunctions IANATn3270Functions,
tn3270eTcpConnId Unsigned32, tn3270eTcpConnId Unsigned32,
tn3270eTcpConnClientIdFormat INTEGER, tn3270eTcpConnClientIdFormat IANATn3270eClientType,
Expires May 1998 [Page 31]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
tn3270eTcpConnClientId OCTET STRING, tn3270eTcpConnClientId OCTET STRING,
tn3270eTcpConnMiscInfoFormat BITS, tn3270eTcpConnTraceData Tn3270eTraceData,
tn3270eTcpConnMiscInfo OCTET STRING, tn3270eTcpConnLogInfo IANATn3270eLogData,
tn3270eTcpConnLuLuBindImage OCTET STRING, tn3270eTcpConnLuLuBindImage OCTET STRING,
tn3270eTcpConnSnaState INTEGER tn3270eTcpConnSnaState INTEGER,
tn3270eTcpConnStateLastDiscReason INTEGER,
tn3270eTcpConnSrvrConfIndex Unsigned32
} }
tn3270eTcpConnRemAddrType OBJECT-TYPE tn3270eTcpConnRemAddrType OBJECT-TYPE
SYNTAX Tn3270eAddrType SYNTAX Tn3270eAddrType
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the type of the value of the "Indicates the type of the value of the
tn3270eTcpConnRemAddress object. For example, tn3270eTcpConnRemAddress object. For example,
ipv4(1) or ipv6(2)." ipv4(1) or ipv6(2)."
skipping to change at line 1647 skipping to change at page 32, line 19
SYNTAX Tn3270eTAddress SYNTAX Tn3270eTAddress
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The remote address associated with a TN3270E client. "The remote address associated with a TN3270E client.
tn3270eTcpConnRemAddrType indicates the address type tn3270eTcpConnRemAddrType indicates the address type
(ipv4 or ipv6 for example). (ipv4 or ipv6 for example).
If a TN3270(E) client is connected to its If a TN3270(E) client is connected to its
server via a proxy client the address represented by server via a proxy client the address represented by
the value of this object should be the remote client's the value of this object shall be the remote client's
address, not the proxy client's address." address, not the proxy client's address."
::= { tn3270eTcpConnEntry 2 } ::= { tn3270eTcpConnEntry 2 }
tn3270eTcpConnRemPort OBJECT-TYPE tn3270eTcpConnRemPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535) SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The remote port associated with a TN3270E client. "The remote port associated with a TN3270E client.
If a TN3270(E) client is connected to its If a TN3270(E) client is connected to its
server via a proxy client the port represented by server via a proxy client the port represented by
the value of this object should be the remote client's the value of this object shall be the remote client's
port, not the proxy client's port." port, not the proxy client's port."
::= { tn3270eTcpConnEntry 3 } ::= { tn3270eTcpConnEntry 3 }
tn3270eTcpConnLocalAddrType OBJECT-TYPE tn3270eTcpConnLocalAddrType OBJECT-TYPE
SYNTAX Tn3270eAddrType SYNTAX Tn3270eAddrType
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
Expires May 1998 [Page 32]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the type of the value of the "Indicates the type of the value of the
tn3270eTcpConnLocalAddress object. For example, tn3270eTcpConnLocalAddress object. For example,
ipv4(1) or ipv6(2)." ipv4(1) or ipv6(2)."
::= { tn3270eTcpConnEntry 4 } ::= { tn3270eTcpConnEntry 4 }
tn3270eTcpConnLocalAddress OBJECT-TYPE tn3270eTcpConnLocalAddress OBJECT-TYPE
SYNTAX Tn3270eTAddress SYNTAX Tn3270eTAddress
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The local address associated with a TN3270E client. "The local address associated with a TN3270E client.
tn3270eTcpConnRemAddrType indicates the address type tn3270eTcpConnRemAddrType indicates the address type
(ipv4 or ipv6 for example)." (ipv4 or ipv6 for example)."
::= { tn3270eTcpConnEntry 5 } ::= { tn3270eTcpConnEntry 5 }
tn3270eTcpConnLocalPort OBJECT-TYPE tn3270eTcpConnLocalPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535) SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The remote port associated with a TN3270E client." "The remote port associated with a TN3270E client."
::= { tn3270eTcpConnEntry 6 } ::= { tn3270eTcpConnEntry 6 }
tn3270eTcpConnLastActivity OBJECT-TYPE tn3270eTcpConnLastActivity OBJECT-TYPE
SYNTAX TimeTicks SYNTAX TimeTicks
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of 100ths of seconds since any data was "The number of 100ths of seconds since any data was
transferred for the associating TCP Connection." transferred for the associated TCP Connection."
DEFVAL { 0 } DEFVAL { 0 }
::= { tn3270eTcpConnEntry 7 } ::= { tn3270eTcpConnEntry 7 }
tn3270eTcpConnBytesIn OBJECT-TYPE tn3270eTcpConnBytesIn OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "octets" UNITS "octets"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of bytes received by the server from TCP "The number of bytes received by the server from TCP
for this connection." for this connection."
::= { tn3270eTcpConnEntry 8 } ::= { tn3270eTcpConnEntry 8 }
tn3270eTcpConnBytesOut OBJECT-TYPE tn3270eTcpConnBytesOut OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "octets" UNITS "octets"
Expires May 1998 [Page 33]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of bytes sent to TCP for this connection." "The number of bytes sent to TCP for this connection."
::= { tn3270eTcpConnEntry 9 } ::= { tn3270eTcpConnEntry 9 }
tn3270eTcpConnResourceElement OBJECT-TYPE tn3270eTcpConnResourceElement OBJECT-TYPE
SYNTAX SnaResourceName SYNTAX SnaResourceName
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
skipping to change at line 1754 skipping to change at page 34, line 6
DESCRIPTION DESCRIPTION
"Indicates the type of resource identified by "Indicates the type of resource identified by
tn3270eTcpConnResourceElement." tn3270eTcpConnResourceElement."
::= { tn3270eTcpConnEntry 11 } ::= { tn3270eTcpConnEntry 11 }
tn3270eTcpConnDeviceType OBJECT-TYPE tn3270eTcpConnDeviceType OBJECT-TYPE
SYNTAX Tn3270DeviceTypes SYNTAX Tn3270DeviceTypes
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the device type if negotiated with client. "Indicates the device type if negotiated with the
This object is also known as logmode." client. A value of unknown(0) should be used as the
value of this object when a device type is not
negotiated. Refer to RFC 1647 for how device types
can be negotiated."
::= { tn3270eTcpConnEntry 12 } ::= { tn3270eTcpConnEntry 12 }
tn3270eTcpConnFunctions OBJECT-TYPE tn3270eTcpConnFunctions OBJECT-TYPE
SYNTAX Tn3270Functions SYNTAX IANATn3270Functions
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object will indicates which of the TN3270 and TN3270E "This object indicates which of the TN3270 and TN3270E
functions that are supported by the server was negioted functions were negotiated by the server and the client
with a client. Refer to tn3270eSrvrFunctionsSupported." for this TCP connection.
Refer to tn3270eSrvrFunctionsSupported for the list of
these functions supported by the server."
::= { tn3270eTcpConnEntry 13 } ::= { tn3270eTcpConnEntry 13 }
tn3270eTcpConnId OBJECT-TYPE tn3270eTcpConnId OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Expires May 1998 [Page 34]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
"The connection identifier associated with a TN3270 or "The connection identifier associated with a TN3270 or
a TN3270E session's TCP connection." a TN3270E session's TCP connection. TCP implementations
often assign a unique (with respect to itself) unsigned
integer as an identifier for a TCP connection.
Implementations that do not support assignment of
unsigned integer connection identifiers should not
support this object."
::= { tn3270eTcpConnEntry 14 } ::= { tn3270eTcpConnEntry 14 }
tn3270eTcpConnClientIdFormat OBJECT-TYPE tn3270eTcpConnClientIdFormat OBJECT-TYPE
SYNTAX INTEGER { SYNTAX IANATn3270eClientType
unknown(0)
}
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The format of the corresponding tn3270eTcpConnClientId "The format of a corresponding tn3270eTcpConnClientId
object: object as defined by the IANSTn3270eClientType
textual convention imported from the
ENUMERATION OCTETs DESCRIPTION IANATn3270eTC-MIB."
unknown(0) 0"
::= { tn3270eTcpConnEntry 15 } ::= { tn3270eTcpConnEntry 15 }
tn3270eTcpConnClientId OBJECT-TYPE tn3270eTcpConnClientId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512)) SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Additional client identification information whose "Additional client identification information. The
content is defined by the corresponding value of type of this information is indicated by the value of
tn3270eTcpConnClientIdFormat." the corresponding tn3270eTcpConnClientIdFormat object.
The purpose of this object is to provide an alternate
means of identifying a client, other than though the
remote address returned in tn3270eTcpConnRemAddress."
::= { tn3270eTcpConnEntry 16 } ::= { tn3270eTcpConnEntry 16 }
tn3270eTcpConnMiscInfoFormat OBJECT-TYPE tn3270eTcpConnTraceData OBJECT-TYPE
SYNTAX BITS { SYNTAX Tn3270eTraceData
none(0),
unknown(1),
proxyIpv4(2),
proxyIpv6(3)
}
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object defines the content of a corresponding "Trace data for this session."
tn3270eTcpConnMiscInfo object. This object is defined
using the BITS SYNTAX in order to enable the presents
of multiple elements. The order of occurance of the
selected elements in a tn3270eTcpConnMiscInfo must
follow the precedence of the associating BIT definition
with the exception of unknown(1) which must be last
if selected:
Expires May 1998 [Page 35]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
ENUMERATION OCTETs DESCRIPTION
none(0) 0
unknown(1) 0..512 A variable length generic field.
proxyIpv4(2) 4 The actual client is connected
via a proxy client whose address
is stored in tn3270eTcpConnClientId.
proxyIpv6(3) 16 The actual client is connected
via a proxy client whose address
is stored in tn3270eTcpConnClientId.
For example, selection of unknown(1), proxyIpv4(2) and
proxyIpv6(3) would result in the corresponding
tn3270eTcpConnMiscInfo containing a proxyIpv6 value
followed by a proxyIpv4 value and ended with a variable
length unknown value."
::= { tn3270eTcpConnEntry 17 } ::= { tn3270eTcpConnEntry 17 }
tn3270eTcpConnMiscInfo OBJECT-TYPE tn3270eTcpConnLogInfo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512)) SYNTAX IANATn3270eLogData
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Additional client information. The contents of this "Log information, encoded as specified in the
object is defined by the corresponding object IANATn3270eLogData textual convention from the
tn3270eTcpConnMiscInfoFormat." IANAtn3270eTC-MIB."
::= { tn3270eTcpConnEntry 18 } ::= { tn3270eTcpConnEntry 18 }
tn3270eTcpConnLuLuBindImage OBJECT-TYPE tn3270eTcpConnLuLuBindImage OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256)) SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"When there is a currently active LU-LU session for "When there is a currently active LU-LU session for
this connection, this object returns the BIND Image this connection, this object returns the BIND Image
(defined to be bytes 1-p of the complete BIND Request (defined to be bytes 1-p of the complete BIND Request
Unit) that was received from the PLU during session Unit) that was received from the PLU during session
activation. When there is no active LU-LU session, activation. When there is no active LU-LU session,
or when a BIND image is unavailable for some other or when a BIND image is unavailable for some other
reason, this object returns the empty string." reason, this object returns a zero-length octet string."
::= { tn3270eTcpConnEntry 19 } ::= { tn3270eTcpConnEntry 19 }
tn3270eTcpConnSnaState OBJECT-TYPE tn3270eTcpConnSnaState OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
unknown(0), unknown(0),
noSluSession(1), noSluSession(1),
sscpLuSession(2), -- but no LU-LU session sscpLuSession(2), -- but no LU-LU session
luLuSession(3) luLuSession(3),
establishingSscpLuSession(4),
establishingLuSession(5)
} }
Expires May 1998 [Page 36]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The current state of the SNA side of the end-to-end "The current state of the SNA side of the end-to-end
TN3270 connection. The following states are defined: TN3270 connection. The following states are defined:
unknown(0) - The true state is not known. unknown(0) - The true state is not known.
noSluSession(1) - The SLU has neither an SSCP-LU noSluSession(1) - The SLU has neither an SSCP-LU
nor an LU-LU session active. nor an LU-LU session active.
sscpLuSession(2) - The SSCP-LU session for the SLU sscpLuSession(2) - The SSCP-LU session for the SLU
is active, but the SLU is not is active, but the SLU is not
currently in session with a PLU. currently in session with a PLU.
luLuSession(3) - The SLU currently has an active luLuSession(3) - The SLU currently has an active
session with a PLU." session with a PLU.
establishingSscpLuSession(4) - Currently, disconnected
and in the process of establishing
an SSCP to LU session.
establishingLuSession(5) - Currently, disconnected
and in the process of establishing
an LU to LU session."
::= { tn3270eTcpConnEntry 20 } ::= { tn3270eTcpConnEntry 20 }
tn3270eTcpConnStateLastDiscReason OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
hostSendsUnbind(1),
hostDontAcceptConnection(2),
outOfResource(3),
clientProtocolError(4),
invalidDeviceName(5),
deviceInUse(6),
inactivityTimeout(7),
hostNotResponding(8),
clientNotResponding(9),
tcpClose(10),
serverClose(11),
sysreqLogoff(12),
serverSpecificHexCode(13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last disconnect reason. Note: that a session
that has not experienced a disconnect would use
a value of unknown(0) for this object."
::= { tn3270eTcpConnEntry 21 }
tn3270eTcpConnSrvrConfIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tn3270eSrvrConfIndex of the tn3270eSrvrConfEntry
belonging to the TN3270E server to whom this entry
belongs."
::= { tn3270eTcpConnEntry 22 }
tn3270eConfSpinLock OBJECT-TYPE
SYNTAX TestAndIncr
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An advisory lock used to allow cooperating
TN3270E-MIB applications to coordinate their
use of the tn3270eSrvrConfTable, the
tn3270eSrvrPortTable, the tn3270eClientGroupTable,
the tn3270eResPoolTable, and the
tn3270eClientResMapTable.
When an application seeks to create a new entry or
alter an existing entry in any of the above mentioned
tables, an implementation MAY require the application
to use the tn3270eConfSpinLock to serialize its changes
or additions relative to those initiated by other
applications. Since this is an advisory lock, an
implementation is not required to support it."
::= { tn3270eObjects 10 }
-- Conformance Definitions -- Conformance Definitions
tn3270eGroups OBJECT IDENTIFIER ::= { tn3270eConformance 1 } tn3270eGroups OBJECT IDENTIFIER ::= { tn3270eConformance 1 }
tn3270eCompliances OBJECT IDENTIFIER ::= { tn3270eConformance 2 } tn3270eCompliances OBJECT IDENTIFIER ::= { tn3270eConformance 2 }
-- compliance statements -- compliance statements
tn3270eCompliance MODULE-COMPLIANCE tn3270eCompliance MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The compliance statement for agents that support the "The compliance statement for agents that support the
TN3270E-MIB." TN3270E-MIB."
MODULE -- this module MODULE -- this module
skipping to change at line 1920 skipping to change at page 37, line 41
TN3270E-MIB." TN3270E-MIB."
MODULE -- this module MODULE -- this module
MANDATORY-GROUPS { tn3270eBasicGroup, MANDATORY-GROUPS { tn3270eBasicGroup,
tn3270eSessionGroup tn3270eSessionGroup
} }
GROUP tn3270eResMapGroup GROUP tn3270eResMapGroup
DESCRIPTION DESCRIPTION
"This group is optional and provides a method of "This group is optional and provides a method of
performing tn3270eClientGroup to tn3270eResPool performing tn3270eClientGroup to tn3270eResPool
mapping." mapping."
GROUP tn3270eHiCapacityGroup
DESCRIPTION
"This group is optional and provides for support
of high capacity counters."
OBJECT tn3270eSrvrConfActivityCheck OBJECT tn3270eSrvrConfActivityCheck
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"The agent is not required to support a set to this "The agent is not required to support a set to this
object if the associating TN3270E server doesn't object if the associated TN3270E server doesn't
support either TIMEMARK or NOP processing. In support either TIMEMARK or NOP processing. In
this case an agent should return noCheck on this case an agent should return noCheck on
retrieval." retrieval."
OBJECT tn3270eSrvrConfActivityTimeout OBJECT tn3270eSrvrConfActivityTimeout
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
Expires May 1998 [Page 37]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
"The agent is not required to support a set to this "The agent is not required to support a set to this
object if the functions enabled by object if the functions enabled by
tn3270eSrvrConfActivityCheck are not supported. tn3270eSrvrConfActivityCheck are not supported.
An agent in this case should return a value of 0." An agent in this case should return a value of 0."
OBJECT tn3270eSrvrConfActivityInterval OBJECT tn3270eSrvrConfActivityInterval
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"The agent is not required to support a set to this "The agent is not required to support a set to this
object if the functions enabled by object if the functions enabled by
tn3270eSrvrConfActivityCheck are not supported. tn3270eSrvrConfActivityCheck are not supported.
An agent in this case should return a value of 0." An agent in this case should return a value of 0."
OBJECT tn3270eSrvrConfAdminStatus OBJECT tn3270eSrvrConfAdminStatus
DESCRIPTION DESCRIPTION
"A TN3270E server is not required to support a "A TN3270E server is not required to support a
stopImmediate state transition." stopImmediate state transition."
OBJECT tn3270eSrvrConfRowStatus
SYNTAX INTEGER {
active(1) -- subset of RowStatus
}
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1)."
OBJECT tn3270eSrvrPortRowStatus
SYNTAX INTEGER {
active(1) -- subset of RowStatus
}
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1)."
OBJECT tn3270eClientGroupRowStatus
SYNTAX INTEGER {
active(1) -- subset of RowStatus
}
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1)."
OBJECT tn3270eResPoolRowStatus
SYNTAX INTEGER {
active(1) -- subset of RowStatus
}
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1)."
OBJECT tn3270eClientResMapRowStatus
SYNTAX INTEGER {
active(1) -- subset of RowStatus
}
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1)."
OBJECT tn3270eTcpConnId
MIN-ACCESS not-accessible
DESCRIPTION
"This object is not required of implementations
that do not support assignment of unsigned
integer connection identifiers."
OBJECT tn3270eConfSpinLock
MIN-ACCESS not-accessible
DESCRIPTION
"The use and support of this object is optional."
::= { tn3270eCompliances 1 } ::= { tn3270eCompliances 1 }
-- units of conformance -- units of conformance
tn3270eBasicGroup OBJECT-GROUP tn3270eBasicGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tn3270eSrvrConfInactivityTimeout, tn3270eSrvrConfInactivityTimeout,
tn3270eSrvrConfActivityCheck, tn3270eSrvrConfActivityCheck,
tn3270eSrvrConfActivityTimeout, tn3270eSrvrConfActivityTimeout,
tn3270eSrvrConfActivityInterval, tn3270eSrvrConfActivityInterval,
tn3270eSrvrFunctionsSupported, tn3270eSrvrFunctionsSupported,
tn3270eSrvrConfAdminStatus, tn3270eSrvrConfAdminStatus,
tn3270eSrvrConfOperStatus, tn3270eSrvrConfOperStatus,
tn3270eSrvrConfSessionTermState, tn3270eSrvrConfSessionTermState,
tn3270eSrvrConfSrvrType, tn3270eSrvrConfSrvrType,
tn3270eSrvrConfContact, tn3270eSrvrConfContact,
tn3270eSrvrConfRowStatus, tn3270eSrvrConfRowStatus,
tn3270eSrvrPortRowStatus, tn3270eSrvrPortRowStatus,
tn3270eSrvrStatsUpTime, tn3270eSrvrStatsUpTime,
tn3270eSrvrStatsMaxLus, tn3270eSrvrStatsMaxLus,
tn3270eSrvrStatsLusInUse, tn3270eSrvrStatsInUseLus,
tn3270eSrvrStatsSpareLus, tn3270eSrvrStatsSpareLus,
tn3270eSrvrStatsMaxPtrs, tn3270eSrvrStatsMaxPtrs,
tn3270eSrvrStatsPtrsInUse, tn3270eSrvrStatsInUsePtrs,
tn3270eSrvrStatsSparePtrs, tn3270eSrvrStatsSparePtrs,
tn3270eSrvrStatsConnectsIn, tn3270eSrvrStatsInConnects,
tn3270eSrvrStatsConnRejects, tn3270eSrvrStatsConnRejects,
tn3270eSrvrStatsDisconnects, tn3270eSrvrStatsDisconnects,
tn3270eSrvrStatsOctetsIn, tn3270eSrvrStatsInOctets,
tn3270eSrvrStatsOctetsInLow, tn3270eSrvrStatsOutOctets,
tn3270eSrvrStatsOctetsOut,
tn3270eSrvrStatsOctetsOutLow,
tn3270eClientGroupSubnetMask, tn3270eClientGroupSubnetMask,
Expires May 1998 [Page 38]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
tn3270eClientGroupPfxLength, tn3270eClientGroupPfxLength,
tn3270eClientGroupRowStatus, tn3270eClientGroupRowStatus,
tn3270eSnaMapLocalName, tn3270eSnaMapLocalName,
tn3270eSnaMapPrimaryLuName tn3270eSnaMapPrimaryLuName,
tn3270eConfSpinLock
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group is mandatory for all hosts supporting the "This group is mandatory for all hosts supporting the
TN3270E-MIB." TN3270E-MIB."
::= { tn3270eGroups 1 } ::= { tn3270eGroups 1 }
tn3270eSessionGroup OBJECT-GROUP tn3270eSessionGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tn3270eResMapAddrType, tn3270eResMapAddrType,
tn3270eResMapAddress, tn3270eResMapAddress,
tn3270eResMapPort, tn3270eResMapPort,
tn3270eResMapElementType, tn3270eResMapElementType,
tn3270eResMapSscpSuppliedName, tn3270eResMapSscpSuppliedName,
tn3270eTcpConnLastActivity, tn3270eTcpConnLastActivity,
tn3270eTcpConnBytesIn, tn3270eTcpConnBytesIn,
tn3270eTcpConnBytesOut, tn3270eTcpConnBytesOut,
tn3270eTcpConnResourceElement, tn3270eTcpConnResourceElement,
tn3270eTcpConnResourceType, tn3270eTcpConnResourceType,
tn3270eTcpConnDeviceType, tn3270eTcpConnDeviceType,
tn3270eTcpConnFunctions tn3270eTcpConnFunctions,
tn3270eTcpConnSrvrConfIndex
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group is mandatory for all hosts supporting the "This group is mandatory for all hosts supporting the
TN3270E-MIB." TN3270E-MIB."
::= { tn3270eGroups 2 } ::= { tn3270eGroups 2 }
tn3270eResMapGroup OBJECT-GROUP tn3270eResMapGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tn3270eResPoolElementType, tn3270eResPoolElementType,
tn3270eResPoolRowStatus, tn3270eResPoolRowStatus,
tn3270eClientResMapRowStatus, tn3270eClientResMapRowStatus,
tn3270eTcpConnId, tn3270eTcpConnId,
tn3270eTcpConnClientIdFormat, tn3270eTcpConnClientIdFormat,
tn3270eTcpConnClientId, tn3270eTcpConnClientId,
tn3270eTcpConnMiscInfoFormat, tn3270eTcpConnTraceData,
tn3270eTcpConnMiscInfo, tn3270eTcpConnLogInfo,
tn3270eTcpConnLuLuBindImage, tn3270eTcpConnLuLuBindImage,
tn3270eTcpConnSnaState tn3270eTcpConnSnaState,
tn3270eTcpConnStateLastDiscReason
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group is optional for all hosts supporting the "This group is optional for all hosts supporting the
Expires May 1998 [Page 39]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997
TN3270E-MIB." TN3270E-MIB."
::= { tn3270eGroups 3 } ::= { tn3270eGroups 3 }
tn3270eHiCapacityGroup OBJECT-GROUP
OBJECTS {
tn3270eSrvrStatsHCInOctets,
tn3270eSrvrStatsHCOutOctets
}
STATUS current
DESCRIPTION
"This group is optional for all hosts supporting the
TN3270E-MIB. Its contents is a list of Counter64
objects. An implementation that doesn't support
these objects should return noSuchObject.
Returning a zero is misleading. Support of these
objects is recommended when the Counter32 versions
can potentially wrap too frequently.
The IF-MIB (RFC 2233) requires that the 64 bit
versions of its counters be implemented when an
interface can support rates around 20 million bits
per second or greater. This implies a minimum wrap
rate of just over 28 minutes. It is recommended that
this guidance be used for determining when an
implementation should implement these objects."
::= { tn3270eGroups 4 }
END END
5. Security Considerations 5.0 Security Considerations
Certain management information defined in this MIB may be considered Certain management information defined in this MIB may be considered
sensitive in some network environments. Therefore, authentication of sensitive in some network environments. Therefore, authentication of
received SNMP requests and controlled access to management information received SNMP requests and controlled access to management information
should be employed in such environments. The method for this SHOULD be employed in such environments. The method for this
authentication is a function of the SNMP Administrative Framework, and authentication is a function of the SNMP Administrative Framework, and
has not been expanded by this MIB. has not been expanded by this MIB.
Several objects in this MIB allow write access or provide for remote Several objects in this MIB allow write access or provide for row
creation. Allowing this support in a non-secure environment can have a creation. Allowing this support in a non-secure environment can have a
negative effect on network operations. It is recommended that negative effect on network operations. It is RECOMMENDED that
implementers seriously consider whether set operations should be implementers seriously consider whether set operations or row creation
allowed without providing, at a minimum, authentication of request should be allowed without providing, at a minimum, authentication of
origin. It it recommended that without such support that the following request origin. It is RECOMMENDED that without such support, the
objects be implemented as read-only: following objects be implemented as read-only:
o tn3270eSrvrConfInactivityTimout o tn3270eSrvrConfInactivityTimout
o tn3270eSrvrConfActivityCheck o tn3270eSrvrConfActivityCheck
o tn3270eSrvrConfActivityTimeout o tn3270eSrvrConfActivityTimeout
o tn3270eSrvrConfActivityInterval o tn3270eSrvrConfActivityInterval
o tn3270eSrvrConfAdminStatus o tn3270eSrvrConfAdminStatus
o tn3270eSrvrConfSessionTermState o tn3270eSrvrConfSessionTermState
o tn3270eSrvrConfContact o tn3270eSrvrConfContact
o tn3270eClientGroupSubnetMask o tn3270eClientGroupSubnetMask
o tn3270eResPoolElementType o tn3270eResPoolElementType
The following objects should either be implemented as read-only or not
implemented when security is an issue as previously discussed:
o tn3270eSrvrConfRowStatus o tn3270eSrvrConfRowStatus
o tn3270eSrvrPortRowStatus o tn3270eSrvrPortRowStatus
o tn3270eClientGroupRowStatus o tn3270eClientGroupRowStatus
o tn3270eResPoolRowStatus o tn3270eResPoolRowStatus
o tn3270eResMapRowStatus o tn3270eResMapRowStatus
6. Acknowledgments 6.0 Intellectual Property
This document is a product of the TN3270E Working Group.
Expires May 1998 [Page 40]~
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997 The IETF takes no position regarding the validity or scope of any
intellectual property or other rights that might be claimed to pertain
to the implementation or use of the technology described in this
document or the extent to which any license under such rights might or
might not be available; neither does it represent that it has made any
effort to identify any such rights. Information on the IETF's
procedures with respect to rights in standards-track and
standards-related documentation can be found in BCP-11. Copies of
claims of rights made available for publication and any assurances of
licenses to be made available, or the result of an attempt made to
obtain a general license or permission for the use of such proprietary
rights by implementers or users of this specification can be obtained
from the IETF Secretariat.
7. References The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary rights
which may cover technology that may be required to practice this
standard. Please address the information to the IETF Executive
Director.
[1] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and 7.0 Acknowledgments
Waldbusser S., "Structure of Management Information for version 2
of the Simple Network Management Protocol (SNMPv2)", RFC 1902,
January 1996.
[2] Network Working Group, Postel, J., and Reynolds, J., "Telnet This document is a product of the TN3270E Working Group.
Protocol Specification", RFC 854, May 1983.
[3] Network Working Group, Postel, J., and Reynolds, J., "Telnet Timing 8.0 References
Mark Option", RFC 860, May 1983.
[4] Network Working Group and Rekhter J., "Telnet 3270 Regime Option", [1] Case, J., McCloghrie, K., Rose, M., and Waldbusser S., "Structure
RFC 1041, January 1988. of Management Information for Version 2 of the Simple Network
Management Protocol (SNMPv2)", RFC 1902, January 1996.
[5] McCloghrie, K., and M. Rose, Editors, "Management Information Base [2] Postel, J., and Reynolds, J., "Telnet Protocol Specification", RFC
for Network Management of TCP/IP-based internets: MIB-II", STD 17, 854, May 1983.
RFC 1213, Hughes LAN Systems, Performance Systems International,
March 1991.
[6] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and S. [3] Postel, J., and Reynolds, J., "Telnet Timing Mark Option", RFC 860,
Waldbusser, "Textual Conventions for version 2 of the Simple May 1983.
Network Management Protocol (SNMPv2)", RFC 1903, January 1996.
[7] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and S. [4] Rekhter, J., "Telnet 3270 Regime Option", RFC 1041, January 1988.
Waldbusser, "Protocol Operations for version 2 of the Simple
Network Management Protocol (SNMPv2)", RFC 1905, January 1996.
[8] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and S. [5] Case, J., McCloghrie, K., Rose, M., and Waldbusser, S., "Transport
Waldbusser, "Conformance Statements for version 2 of the Simple Mappings for Version 2 of the Simple Network Management Protocol
Network Management Protocol (SNMPv2)", RFC 1904, January 1996. (SNMPv2)", RFC 1906, January 1996.
[9] Case, J., M. Fedor, M. Schoffstall, J. Davin, "Simple Network [6] Case, J., McCloghrie, K., Rose, M., and Waldbusser, S., "Textual
Management Protocol", RFC 1157, SNMP Research, Performance Systems Conventions for Version 2 of the Simple Network Management Protocol
International, MIT Laboratory for Computer Science, May 1990. (SNMPv2)", RFC 1903, January 1996.
[10] IETF SNMPv2 Working Group and McCloghrie, K., "TCP-MIB [7] Case, J., McCloghrie, K., Rose, M., and Waldbusser, S., "Protocol
Operations for Version 2 of the Simple Network Management Protocol
(SNMPv2)", RFC 1905, January 1996.
Expires May 1998 [Page 41]~ [8] Case, J., McCloghrie, K., Rose, M., and Waldbusser, S.,
"Conformance Statements for Version 2 of the Simple Network
Management Protocol (SNMPv2)", RFC 1904, January 1996.
White TN3270E Management Information Base (TN3270E-MIB) 20 November 1997 [9] Case, J., McCloghrie, K., Rose, M., and Waldbusser, S., "Management
Information Base for Version 2 of the Simple Network Management
Protocol (SNMPv2)", RFC 1907, January 1996.
Definitions", November 1994. [10] McCloghrie, K., "TCP-MIB Definitions", November 1994.
[11] Hinden, R., Deering, S., "IP Version 6 Addressing Architecture", [11] Hinden, R., Deering, S., "IP Version 6 Addressing Architecture",
<draft-ietf-ipngwg-addr-arch-v2-02.txt>, July 16, 1997 <draft-ietf-ipngwg-addr-arch-v2-02.txt>, July 16, 1997.
[12] Krupczak, Cheryl, Saperia, Jonathan, "Definitions of System-Level [12] Krupczak, Cheryl, Saperia, Jonathan, "Definitions of System-Level
Managed Objects for Applications", April 15, 1997. Managed Objects for Applications", April 15, 1997.
8. Authors' Address [13] Bradner, S., "Key words for use in RFCs to Indicate Requirement
Levels", BCP 14, RFC 2119, March 1997.
[14] Kelly, B., "TN3270 Enhancements", RFC 1647, July 1994.
[15] Harrington, D., Presuhn, R., Wijnen, B., "An Architecture for
Describing SNMP Management Frameworks", RFC 2271, January 1998.
[16] Case, J., McCloghrie, K., Rose, M., and Waldbusser, S.,
"Coexistence between Version 1 and Version 2 of the
Internet-standard Network Management Framework", RFC 1908, January
1996.
9.0 Authors' Addresses
Kenneth D. White Kenneth D. White
Dept. G80/Bldg 501 Dept. BRQA/Bldg. 501/G114
IBM Corporation IBM Corporation
P.O.Box 12195
3039 Cornwallis
Research Triangle Park, NC 27709, USA Research Triangle Park, NC 27709, USA
Phone: +1-919-254-0102
E-mail: kennethw@vnet.ibm.com E-mail: kennethw@vnet.ibm.com
Expires May 1998 [Page 42]~ Robert Moore
Dept. BRQA/Bldg. 501/G114
IBM Corporation
P.O.Box 12195
3039 Cornwallis
Research Triangle Park, NC 27709, USA
Phone: +1-919-254-7507
E-mail: remoore@us.ibm.com
10.0 Full Copyright Statement
Copyright (C) The Internet Society (1997). All Rights Reserved.
This document and translations of it may be copied and furnished to
others, and derivative works that comment on or otherwise explain it or
assist in its implementation may be prepared, copied, published and
distributed, in whole or in part, without restriction of any kind,
provided that the above copyright notice and this paragraph are included
on all such copies and derivative works. However, this document itself
may not be modified in any way, such as by removing the copyright notice
or references to the Internet Society or other Internet organizations,
except as needed for the purpose of developing Internet standards in
which case the procedures for copyrights defined in the Internet
Standards process must be followed, or as required to translate it into
languages other than English.
The limited permissions granted above are perpetual and will not be
revoked by the Internet Society or its successors or assigns.
This document and the information contained herein is provided on an "AS
IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK
FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT
INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
Appendix A. IANATn3270eTC-MIB
This appendix defines the current content of the IANATn3270eTC-MIB.
This section should be removed from this document prior to its approval,
at which time this MIB will be administered by IANA. IANATn3270eTC-MIB
DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, experimental
FROM SNMPv2-SMI
TEXTUAL-CONVENTION
FROM SNMPv2-TC;
ianaTn3270eTcMib MODULE-IDENTITY
LAST-UPDATED "9802020000Z" -- February 2, 1998
ORGANIZATION "IANA"
CONTACT-INFO
"Internet Assigned Numbers Authority
Postal: USC/Information Sciences Institute
4676 Admiralty Way, Marina del Rey, CA 90292
Tel: +1 310 822 1511
E-Mail: iana@isi.edu"
DESCRIPTION
"This module defines a set of textual conventions
for use by the TN3270E-MIB and the TN3270E-RT-MIB.
Any additions or changes to the contents of this
MIB module must first be discussed on the tn3270e
working group list at: tn3270e@list.nih.gov
and approved by one of the following TN3270E
working group contacts:
Ed Bailey (co-chair) - elbailey@us.ibm.com
Michael Boe (co-chair) - mboe@cisco.com
Ken White - kennethw@vnet.ibm.com
Robert Moore - remoore@us.ibm.com
The above list of contacts can be altered with
the approval of the two co-chairs.
The Textual Conventions defined within this MIB have
no security issues associated with them unless
explicitly stated in their corresponding
DESCRIPTION clause."
-- Need a real OID assigned
::= { experimental 2001 }
IANATn3270Functions ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention reflects the current set of
TN3270 and TN3270E functions that can be negotiated
between a server and its client:
RFC856
transmitBinary The sender of this command REQUESTS
permission to begin transmitting, or
confirms that it will now begin
transmitting characters which are to
be interpreted as 8 bits of binary
data by the receiver of the data.
RFC820
timeMark The sender of this command REQUESTS
that the receiver of this command
return a WILL TIMING-MARK in the data
stream at the 'appropriate place' ...
RFC885
endOfRecord The sender of this command requests
permission to begin transmission of
the Telnet END-OF-RECORD (EOR) code
when transmitting data characters, or
the sender of this command confirms it
will now begin transmission of EORs
with transmitted data characters.
RFC1091
terminalType Sender is willing to send terminal
type information in a subsequent
sub-negotiation.
RFC1041
tn3270Regime Sender is willing to send list of
supported 3270 Regimes in a
subsequent sub-negotiation.
RFC1647
scsCtlCodes (Printer sessions only). Allows the
use of the SNA Character Stream (SCS)
and SCS control codes on the session.
SCS is used with LU type 1 SNA sessions.
dataStreamCtl (Printer sessions only). Allows the use
of the standard 3270 data stream. This
corresponds to LU type 3 SNA sessions.
responses Provides support for positive and
negative response handling. Allows the
server to reflect to the client any and
all definite, exception, and no response
requests sent by the host application.
bindImage Allows the server to send the SNA Bind
image and Unbind notification to the
client.
sysreq Allows the client and server to emulate
some (or all, depending on the server) of
the functions of the SYSREQ key in an SNA
environment."
SYNTAX BITS {
transmitBinary(0),-- rfc856
timemark(1), -- rfc860
endOfRecord(2), -- rfc885
terminalType(3), -- rfc1091
tn3270Regime(4), -- rfc1041
scsCtlCodes(5), -- rfc1647
dataStreamCtl(6), -- rfc1647
responses(7), -- rfc1647
bindImage(8), -- rfc1647
sysreq(9) -- rfc1647
}
IANATn3270eClientType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The textual convention for defining the set of
enumerations used by tn3270eTcpConnClientIdFormat
in the TN3270E-MIB:
ENUMERATION OCTETs DESCRIPTION
none(0) 0 Not specified
other(1) 1..512 Implementation specific
ipv4(2) 6 4-octet IP Address plus
2-octet TCP Port
ipv6(3) 18 16-octet IPv6 Address
plus 2-octet TCP Port
domainName(4) 1..512 The DNS name of a
client.
truncDomainName(5) 1..512 The truncated DNS name
of a client.
string(6) 1..512 Unknown Utf8String
certificate(7) 1..512 certificate
userId(8) 1..8 Client's userid
x509dn(9) 1..512 X.509 Distinguished Name
Representation of a certificate(7) may be lead to
a security exposure and is NOT RECOMMENDED without
adequate security."
SYNTAX INTEGER {
none(0),
other(1),
ipv4(2),
ipv6(3),
domainName(4),
truncDomainName(5),
string(6),
certificate(7),
userId(8),
x509dn(9)
}
IANATn3270eLogData ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An octet string representing log data as pertaining to
either a TN3270 or TN3270E Session as reported from a
TN3270E Server. Log data is stored in an octet string
in time order (from earliest to latest).
Each log element has the following form:
+------+----+---------+------------+
!length!type!TimeStamp! data !
+------+----+---------+------------+
where
length = one-octet length of the data portion of the
trace element, not including the length,
type, and TimeStamp fields
type = one-octet code point characterizing the data.
TimeStamp = A 4 octet field that follows the TimeStamp
(TimeTicks) textual convention as defined
by RFC 1903.
data = initial part of a PDU.
length type
0-250 x'00' - unknown
0 x'01' - inactivity timer expired
0 x'02' - dynamic timer expired
0 x'03' - actlu req
0 x'04' - bind req
0 x'05' - clear req
0 x'06' - dactlu req
0 x'07' - warm actpu req
0 x'08' - sdt req
0 x'09' - unbind req
0 x'0A' - notify resp
0 x'0B' - reply PSID neg rsp
0 x'0C' - reply PSID pos rsp
0 x'0D' - unbind rsp
0 x'0E' - hierarchical reset
0 x'0F' - client connect req
0 x'10' - client disconnect req
0 x'11' - timingmark received
0 x'12' - flowControl timer expired
0 x'13' - neg rsp to host
0 x'14' - neg rsp from host
0 x'15' - data contention
0 x'16' - no buffer to send SNA data
0 x'17' - receive response while inbound
0 x'18' - client protocol error
0 x'19' - badClientSequenceReceived
1-250 x'1A' - utf8String
2 x'1B' - hexCode, implementation dependent
log event entries have a minimum length of 6 octets.
The zero-length string indicates that no log data is
available."
SYNTAX OCTET STRING (SIZE (0..256))
END
 End of changes. 280 change blocks. 
817 lines changed or deleted 1011 lines changed or added

This html diff was produced by rfcdiff 1.34. The latest version is available from http://tools.ietf.org/tools/rfcdiff/